Price : $200 shipped/ $150 locally picked up
Charlotte nc
For sale **
2x exterior molle panels for the 4th gen 4runner fitting the Prinsu or Martin off-road style roof rack.
Aluminum, painted black, could probably use a quick sand a repaint.
The drivers side panel had 2 notches sanded in to fit the awning, passenger side had a couple of holes drilled to mount a tie down latch for my RTT.
These panels are my own design and we’re fabricated by a local metal vendor. There are several similar commercial option available. I was using these to carry a 3.5 gallon fuelpak on the drivers side and traction boards on the passenger side.
I will provide the carriage bolts and screw down knobs for the traction boards. I was using an Amazon brand but they should really fit any traction board out here with the amount of slots and holes provided.
There are 2 rubber suction cups from Amazon on each panel to rest against the glass. I’m including them, they work but are a bit dry rotted, it doesn’t need suction to hold, but just to space them off the glass.
I had a steel version prior that was fairly cheap in price, but we’re near 40lbs. These aluminum panels are something like 14lbs. You use the mounting bolts for the cross rails to sandwich the roof rack rails between the cross bars and these panels to hold in place.
I was looking to get what I paid the metal vendor locally ($360) but will be willing to ship to lower 48 for $385.
Thanks !
Sent from my iPhone using Tapatalk
Charlotte nc
For sale **
2x exterior molle panels for the 4th gen 4runner fitting the Prinsu or Martin off-road style roof rack.
Aluminum, painted black, could probably use a quick sand a repaint.
The drivers side panel had 2 notches sanded in to fit the awning, passenger side had a couple of holes drilled to mount a tie down latch for my RTT.
These panels are my own design and we’re fabricated by a local metal vendor. There are several similar commercial option available. I was using these to carry a 3.5 gallon fuelpak on the drivers side and traction boards on the passenger side.
I will provide the carriage bolts and screw down knobs for the traction boards. I was using an Amazon brand but they should really fit any traction board out here with the amount of slots and holes provided.
There are 2 rubber suction cups from Amazon on each panel to rest against the glass. I’m including them, they work but are a bit dry rotted, it doesn’t need suction to hold, but just to space them off the glass.
I had a steel version prior that was fairly cheap in price, but we’re near 40lbs. These aluminum panels are something like 14lbs. You use the mounting bolts for the cross rails to sandwich the roof rack rails between the cross bars and these panels to hold in place.
I was looking to get what I paid the metal vendor locally ($360) but will be willing to ship to lower 48 for $385.
Thanks !
Sent from my iPhone using Tapatalk
Last edited:
