5th Gen For Sale/Wanted Thread
- Thread starter skel
- Start date
Grizzld
New member
TevisAaron
New member
Sorry, I sold them!
Factory Sand Beige Seat Covers//Running Boards
I have (or will in about a week) the brand new seat covers out of a SR5 4Runner. I bought the rig this past Thursday and ordered leather to replace them. I have no idea what to ask for them, so make me a fair offer!
I also am going to have the factory running boards for sell.
You can text me at Three 2 Five two two 6 four zero 5 2
I have (or will in about a week) the brand new seat covers out of a SR5 4Runner. I bought the rig this past Thursday and ordered leather to replace them. I have no idea what to ask for them, so make me a fair offer!
I also am going to have the factory running boards for sell.
You can text me at Three 2 Five two two 6 four zero 5 2
EasylyConfused
New member
WTB: TE Rim
I'd like to buy a single TE rim, but would consider buying 4 if someone is unwilling to split up a set.
I'd like to buy a single TE rim, but would consider buying 4 if someone is unwilling to split up a set.
MeBe4running
New member
Rear Cargo Support and Rear Sliding Tray for Sale/ GOBI wind fairing
Spring cleaning Folks so im selling my rear cargo set up. The sliding tray is factory and from my TE. Mechinally it's in great shape. the surface has a few scratchs and the carpet has some use to it. No stains. Asking $85.00+ shipping which would most likely be via freight.
The rear cargo support mounts on top of the sliding tray allowing full use of the tray. So you can place draws, cargo and pretty much anything you can imagine on top. It's made out of 1" inch square tubing through out and has been sprayed with rustleom. To install is you have to remove the center storge tray located behind the back seats (2nd row). It mounts using the x4 pre-existing factory tie down locations with 10mm bolts. It's level and extremely sturdy. Asking $95.00 + freight shipping charges. Pictures to follow shortly.
Brand new never used GOBI wind fairing for sale asking $45.00 + shipping charge.
Spring cleaning Folks so im selling my rear cargo set up. The sliding tray is factory and from my TE. Mechinally it's in great shape. the surface has a few scratchs and the carpet has some use to it. No stains. Asking $85.00+ shipping which would most likely be via freight.
The rear cargo support mounts on top of the sliding tray allowing full use of the tray. So you can place draws, cargo and pretty much anything you can imagine on top. It's made out of 1" inch square tubing through out and has been sprayed with rustleom. To install is you have to remove the center storge tray located behind the back seats (2nd row). It mounts using the x4 pre-existing factory tie down locations with 10mm bolts. It's level and extremely sturdy. Asking $95.00 + freight shipping charges. Pictures to follow shortly.
Brand new never used GOBI wind fairing for sale asking $45.00 + shipping charge.
marlin driver
New member
Wanted: TE wheels in like-new condition
I am interested in buying a full set (4 or 5) Trail Edition wheels. My 4runner is new and I would like the wheels to be in like-new condition. Prefer local purchase (Orange County, SoCal), but if you will ship to me, please let me know what you have and how much you are asking. I know a few of you guys with custom wheels on your TEs have the OEM wheels sitting in your garage. Here is your chance to move them.
PM me.
thanks,
Jeff
I am interested in buying a full set (4 or 5) Trail Edition wheels. My 4runner is new and I would like the wheels to be in like-new condition. Prefer local purchase (Orange County, SoCal), but if you will ship to me, please let me know what you have and how much you are asking. I know a few of you guys with custom wheels on your TEs have the OEM wheels sitting in your garage. Here is your chance to move them.
PM me.
thanks,
Jeff
agjake01
New member
About to mount some new tires on my 2010 SR5 and will be pulling the Dunlops off with 34k on them. They still have a good amount of tread on them if anyone wants them for cheap. No plugs and even wear. I'll measure the tread depth when I pull them off.
Make me an offer.
I'm in the DC/MD/VA area.
Make me an offer.
I'm in the DC/MD/VA area.
SOC4Runner
New member
Marlin Driver,
I'm currently shopping for new wheels and tires for my 2012 TE. I have about 11k miles on them and look new. Do you want just the wheels or both wheels and tires? I live in San Juan Capistrano, CA.
Dave
I'm currently shopping for new wheels and tires for my 2012 TE. I have about 11k miles on them and look new. Do you want just the wheels or both wheels and tires? I live in San Juan Capistrano, CA.
Dave
FS: 2013 4Runner Limited 20" Wheels/Tires
Have less than a month old 2013 LE Rims/Tires for sale. Mint condition, total of 1644 miles. Just got my new wheels/rims installed today. Listed on ebay as well, user name is Jesserue. I'm in South Orange County CA and would prefer to sell local. Please PM with questions.
SOLD!
Have less than a month old 2013 LE Rims/Tires for sale. Mint condition, total of 1644 miles. Just got my new wheels/rims installed today. Listed on ebay as well, user name is Jesserue. I'm in South Orange County CA and would prefer to sell local. Please PM with questions.
SOLD!
Last edited:
Keemonrunnin
Member
Qjake
New member
Invest in Weathertech's or Husky's! They're more money but are far superior imo.
MOJoWales
New member
MeBe4running
New member
Rear cargo tray/steel support for draws/gobi wind fairing
Spring cleaning Folks so im selling my rear cargo set up. ***PENDING*** The sliding tray is factory and from my TE. Mechinally it's in great shape. the surface has a few scratchs and the carpet has some use to it. No stains. Asking $85.00+ shipping which would most likely be via freight.***PENDING***
***SOLD***The rear cargo support mounts on top of the sliding tray allowing full use of the tray. So you can place draws, cargo and pretty much anything you can imagine on top. It's made out of 1" inch square tubing through out and has been sprayed with rustleom. To install is you have to remove the center storge tray located behind the back seats (2nd row). It mounts using the x4 pre-existing factory tie down locations with 10mm bolts. It's level and extremely sturdy. Asking $95.00 + freight shipping charges. Pictures to follow shortly.***SOLD***
Brand new never used GOBI wind fairing for sale asking $45.00 + shipping charge.
Spring cleaning Folks so im selling my rear cargo set up. ***PENDING*** The sliding tray is factory and from my TE. Mechinally it's in great shape. the surface has a few scratchs and the carpet has some use to it. No stains. Asking $85.00+ shipping which would most likely be via freight.***PENDING***
***SOLD***The rear cargo support mounts on top of the sliding tray allowing full use of the tray. So you can place draws, cargo and pretty much anything you can imagine on top. It's made out of 1" inch square tubing through out and has been sprayed with rustleom. To install is you have to remove the center storge tray located behind the back seats (2nd row). It mounts using the x4 pre-existing factory tie down locations with 10mm bolts. It's level and extremely sturdy. Asking $95.00 + freight shipping charges. Pictures to follow shortly.***SOLD***
Brand new never used GOBI wind fairing for sale asking $45.00 + shipping charge.
Attachments
Last edited:
Wonderbreadman
New member
For Sale K&N CAI 63-9034
For Sale K&N CAI 63-9034
I bought this off another member here who used it 4 months. Everything is there including instructions and original box. Asking what I payed for it $180 message here or for faster response call me 508-nine54-four396 -Dave
For Sale K&N CAI 63-9034
I bought this off another member here who used it 4 months. Everything is there including instructions and original box. Asking what I payed for it $180 message here or for faster response call me 508-nine54-four396 -Dave
FatTiresRollin
New member
Bump
Bumping this back up to the top. I still have the original box and packing materials in my basement. If it sparks any interest I am willing to keep my $200 asking price and include shipping on the east coast. If you are located somewhere else, I will gladly look into the actual shipping costs and maybe we can come to an agreement. Make me an offer...
Thought I would try posting these on here. Probably not too many...if any local 5th gen members here in the Roanoke/New River Valley, but for now I am going to say this sale is local only. Just replaced these with some N-Fabs for something a little more offroad friendly. The bottoms have some surface scratches due to not quite having enough clearance. There is also a pretty good scratch on the back right bar due to lack of traction compliments of the latest snowfall....very low speed contact (slid down my driveway) with a rock retaining wall. The bars are polished stainless, so if you have any skills they can be sanded and polished back to new. If nobody bites soon I will fix them myself and the price will go up to reflect. These are $350 new...I am offering as is for $200...reasonable offers entertained.
Oh yeah..Of course I have all the mounting hardware. If we can come to an agreement and set-up a time, I will gladly help you put them on. I put these on being the first time I even turned a wrench on my truck....took 1.5 hours.
Bumping this back up to the top. I still have the original box and packing materials in my basement. If it sparks any interest I am willing to keep my $200 asking price and include shipping on the east coast. If you are located somewhere else, I will gladly look into the actual shipping costs and maybe we can come to an agreement. Make me an offer...
lilsid112
New member
I finally received my all weather mats for my 13 4runner from Toyota and don't need my original carpet ones. Mats are in pretty decent shape since Im usually the only person in my car. Car was purchased on Nov 20 and I removed them a couple of weeks ago. Feel free to PM me and questions.
Price $ 80
Price $ 80
Speedy Babo
New member
Selling FX-R 3.0 bi-xenon projectors (new)
Bought a kit from theretrofitsource.com and decided to use a different projector instead. Originally $140. Selling for $105 shipped.
See how they look here installed from user Philsey: Headlight install process with pics
Really detailed writeup from user Hbryanlopez: FX-R write up with pics
Specs:
2.5" clear lens, left hand drive model, takes D2S bulbs, takes 9006 inputs for high-beam solenoid.
Can either do the retro yourself or send it off to get it professionally done. Would need to order shrouds (many different styles) and HID kit (bulb, ballasts, harness for H11) at a minimum to complete a retro. You can buy a highbeam splitter harness to activate the solenoid highbeam when you turn on your oem highbeam.
Thanks for looking!
Bought a kit from theretrofitsource.com and decided to use a different projector instead. Originally $140. Selling for $105 shipped.
See how they look here installed from user Philsey: Headlight install process with pics
Really detailed writeup from user Hbryanlopez: FX-R write up with pics
Specs:
2.5" clear lens, left hand drive model, takes D2S bulbs, takes 9006 inputs for high-beam solenoid.
Can either do the retro yourself or send it off to get it professionally done. Would need to order shrouds (many different styles) and HID kit (bulb, ballasts, harness for H11) at a minimum to complete a retro. You can buy a highbeam splitter harness to activate the solenoid highbeam when you turn on your oem highbeam.
Thanks for looking!
Attachments
Last edited:
