5th Gen For Sale/Wanted Thread
- Thread starter skel
- Start date
There are a few of us on here with this bumper Both of my 5th gens have one, GD2013 has one, JimD has one, Tim Terleski has one and So does Chris Gray (but not installed). I have it on pretty good Authority that it will be the last 5th gen 4runner Rocktek bumper ever. He has been stocking them since 2012 and only ever sold 5 (not counting my three). Tube plate hybrid bumpers are just not where its at anymore. This one has been in TOD's inventory for near two years.
Here is a link to where we sell them if you want to see pics
http://pathfinderoutdoors.com/index.php?route=product/product&manufacturer_id=19&product_id=64
Last edited:
How easy/hard is the install on it? Any cutting or drilling required?
What year is your truck?
adio3x
New member
FS: 14' driver tail lamp & 10' driver tail lamp
I have 2 tail lamps for sale, one from a 2014, the other from a 2010 sr5.
-2014 DRIVER tail lamp, a few tiny light scratches on the lens, overall in the appearance is in great shape. Now the bad, I broke off one of the mounting screws in the back. It still works, it's just a little loose with 1 mounting screw installed. Maybe someone can weld a screw onto it. $100 + shipping
-2010 DRIVER tail lamp, few light scratches on the lens, overall in great shape. Back is clean as well, no broken anything. $100 + shipping
I have 2 tail lamps for sale, one from a 2014, the other from a 2010 sr5.
-2014 DRIVER tail lamp, a few tiny light scratches on the lens, overall in the appearance is in great shape. Now the bad, I broke off one of the mounting screws in the back. It still works, it's just a little loose with 1 mounting screw installed. Maybe someone can weld a screw onto it. $100 + shipping
-2010 DRIVER tail lamp, few light scratches on the lens, overall in great shape. Back is clean as well, no broken anything. $100 + shipping
2013
It's bolts right up! You might need to trim the center piece of plastic but it's nothing too serious or difficult.
Last edited:
No drilling, but you do have to cut your bumper skin. As far as how hard it is to install.... well that depends on how good you are at installing things. its no harder than any other bumper to install. once you get you plastic cut, the bumper just slips back into place where your old bumper was and bolts up.
MAD 4Runner
New member
Yes I still have the rack. PM me please
Decent condition Stock Trail skid plates if anyone wants them. Prefer local, would want $50 or I may just store them in the garage.
Any chance at all you would ship that fuel tank skid?
houzhifang119
New member
chriswachs
New member
Brake light trouble
I am interested in the 2010 drivers side Tail. I have a Limited and assume the tail lights are the same. Do you know? My left brake light stopped working, replaced bulb and fuse, nothing. Running lights work but no brake, any ideas before I purchase this.
I am interested in the 2010 drivers side Tail. I have a Limited and assume the tail lights are the same. Do you know? My left brake light stopped working, replaced bulb and fuse, nothing. Running lights work but no brake, any ideas before I purchase this.
Stiiiiiiiill available!
Jernik
New member
Sounds like an electrical issue in the wiring - something is not making the connection to get power to the bulb. I don't think replacing the plastic housing will cure your problem. My electrical background is very basic, I'd do a visual check for broken/pinched wires that may be shorting out. If nothing obvious was found, I'd have to take it to someone who has tools/experience to track down the problem for me. It may be a switch or something has gone bad, you'd have to know where to look and how to test it to find it. Good luck!
