5th Gen For Sale/Wanted Thread

[MTN4RNR]

FS: TRD PRO front bumper garnish $325 Obo $ lower valence $125 Obo plus shipping and PayPal.

[mention=129593]mtn4rnr[/mention]

There is definitely a want and a need going on here.... I need that valence to make the front end of my rig look the way I want to... Ugh. But money.... :violin:

 

[06HAOLE]

FS: TRD PRO front bumper garnish $325 Obo $ lower valence $125 Obo plus shipping and PayPal.

If only you were in So Cal. Great deal.

 

[Dr Digital WKNC]

Do you mean the black caps of the roof rails?

Yeah. If no one wants the rack.

 

[HerT4R]

The frame rail to cross bar- are they the round pieces that go under the cats? mine didn't come with them. Gotta pic- I may be interested...

sorry for the delay!!!

see attachment for information. I have the parts you are interested in, except i used some of the factory fasteners to attach the skid plates for the time being (i was in a pinch).

the ones you are asking about is number 12 (left and right).

I also have number 11 (left and right).

this is all from Olathe toyota parts website.

 

[cd121082]

bump

Local pick up only in the the Seattle area. Pictures are right after i took them out, so I haven't had a chance to wash them up yet. PM me if your interested. Thanks

Weathertech Digifit Black Mats- $100---SOLD!!!

DeeZee Running Boards- $150

Cargo Mat for 4Runner with 3rd Row-$50

 

[Shonuff]

WTB: set of stock rims

I'm looking for a second set of OEM rims for my 13 limited. I'm in upper Michigan, so seller would likely need to be willing to ship.

Send me a PM if you have some you are hoping to part with.

Cheers.

 

[Mistaken]

Sold.

 

[Cymon]

Sold!

so didn't want to have to post this but competition in the market is competition.

Selling "like new" oem (original equipment by manufacturer) roof rack cross bars from 2015 toyota 4runner. Never been used. These are low profile aerodynamic roof rails to carry your paddle board, surf board, kayak, canoe, cargo carrier, most universal mount thule/yakima products. Or anything else you want to put on the roof of your suv short of a rtt (although even some people try that). Fit all 4runner models from 2010-2016 (except 2010-2013 trail models). These roof rails can be installed in less then 5 minutes with just a small flat head screwdriver. Msrp $140

$70 local pick-up (south florida)
will ship if buyer pays shipping. Just as an fyi i did the calculations and its $20 shipping from miami to seattle so unless you live in seattle you will be paying less then $90 shipped for something that is selling from most discount dealers for over $100 + shipping.

Link below to picture and manufacturer description same as item for sale.

http://touch.toyota.com/vehicles/2015/4runner/accessories/roof-rack-cross-bars.html

 

[clydeepants]

Update: SOLD

I have a brand new, never installed set of black TRD Pro Wheel for sale. I purchased from the dealer in March at a discounted $165/wheel + tax, normally $198. I recently got a great deal from jmf_tracy for wheels and tires and won’t be needing these anymore. I have the invoice and can still return since purchased within the last 30 days, but I wanted to pass the savings to fellow members.

If there is no interest in the next few days, I’ll just bring them back for a refund.

Condition: Brand New in Box
Price: $165 x 4 (+tax) = $700
Location: Redondo Beach, CA 90278
Shipping: Prefer local sale, willing to meet at a reasonable distance. May consider shipping if there is no local interest.

crappy cell phone pic

 

[clydeepants]

FS: 5th Gen TE Front Lower Valance, $75 OBO – Redondo Beach, CA

I have an extra lower front valance, Part# 53901-35250. I originally purchased from Haydenatx and haven’t install yet. No clips.

Condition: Used 8/10 no missing tabs, plastidip’d in black
Price: $75 OBO
Location: Redondo Beach, CA 90278
Shipping: Prefer local sale, willing to meet at a reasonable distance. May consider shipping if there is no local interest.

Pictures will be added when I get home from work

 

[klum17]

I have a set of OEM side steps off of my 2015 4Runner. They will come with all the hardware. They are in great condition. I just upgraded. $175, located in Jackson,TN. I will drive up to an hour to meet someone. I will ship on your dime.

 

[cutty01]

Friendly bump. Surprised no takers yet. Brand new, 27% discounted from the price being sold on eBay. SOLD

How I about I offer $5 flat ship to anywhere in the continental U.S!

After spending hours agonizing over wiring diagrams and accepting my electrical wiring intrepidation, I am going to sell my recently purchased Bussmann RTMR Fuse Block and go in a different direction.

This is the exact same one that you have read about that is being sold on eBay for $129. This guy has sold hundreds all over the world. The wiring work is amazing and I have even emailed him a few times with questions and he always responds within 24 hours.

I am selling for $SOLD + shipping to your location (approx $10). Please PM with questions and if interested, I will send you my PaypalID.

Included is everything it came with sans the extra heat shrink tubing:
1- Fuse/ relay box with waterproof cover
1-80A Fuse and cover
2- Mounting brackets
5- Relays
5- 30 Amp fuses
5- 15 Amp fuses
Uninsulated Butt connectors
Expandable loom heat and chemical resistant (black loom)
Wires come with watertight seals, and 10 plugs making the box completely watertight
Pos. wire is 8 GA +- 36" long
Neg. wire is 12 GA +- 36" long
Accessories wires are 12 GA +- 36" long
Switch/ trigger wires are 16 GA +- 36" long
Fused/ non Relay wires are 16 GA +- 36" long
Mounting instructions
Wiring diagram

Here is a review and install video.

 

[1G3runner]

I might have consider, wish they were bronze

If I sell em, they'll be funding some bronze stealth6 or ray10 for my MGM. Sweet combo!

:clap2:

 

[rokmoso]

for sale TRD Skid Plate brand new local pick up only socal OC asking $240 part# PT938-00140

 

[06HAOLE]

I have a set of CBI ditch light brackets for sale. They are in great condition and I am only selling them to mount a bigger light. I previously ran Baja Designs Squadron Pros on them with great results.

$40 picked up in Sherman Oaks, CA
Or
$45 shipped to lower 48 states

Bump. Still available. They are off the truck and ready to ship.

 

[Engineer]

Trail Badges - Free

These are version 1 of the current design, I believe this means they are a few mm thicker then the current offering. I didn't like them when they first arrived so they sat in the toolbox for months, tried again over the weekend and I still prefer the cleaner lines of no badge.

Free to a good home unless shipping is outrageous then I will ask that you cover it. Due to the nature of the item I expect to ship in a flat rate small box with stuffing to prevent breakage.

 

[KingTaco]

These are version 1 of the current design, I believe this means they are a few mm thicker then the current offering. I didn't like them when they first arrived so they sat in the toolbox for months, tried again over the weekend and I still prefer the cleaner lines of no badge.

Free to a good home unless shipping is outrageous then I will ask that you cover it. Due to the nature of the item I expect to ship in a flat rate small box with stuffing to prevent breakage.

Will PM now, thanks!

 

[MTN4RNR]

These are version 1 of the current design, I believe this means they are a few mm thicker then the current offering. I didn't like them when they first arrived so they sat in the toolbox for months, tried again over the weekend and I still prefer the cleaner lines of no badge.

Free to a good home unless shipping is outrageous then I will ask that you cover it. Due to the nature of the item I expect to ship in a flat rate small box with stuffing to prevent breakage.

I'll take them! Shoot you a PM

EDIT: Damn. I waited a few minutes too long... [MENTION=137810]KingTaco[/MENTION], let me know if it doesn't work out for any reason....

 

[KingTaco]

EDIT: Damn. I waited a few minutes too long... [MENTION=137810]KingTaco[/MENTION], let me know if it doesn't work out for any reason....

You got it.

 

[Dane2992]

These are version 1 of the current design, I believe this means they are a few mm thicker then the current offering. I didn't like them when they first arrived so they sat in the toolbox for months, tried again over the weekend and I still prefer the cleaner lines of no badge.

Free to a good home unless shipping is outrageous then I will ask that you cover it. Due to the nature of the item I expect to ship in a flat rate small box with stuffing to prevent breakage.

Got a link to buy these?