5th Gen For Sale/Wanted Thread

Air on Board Switches

Two brand new Air on Board Switches.

Reverse Camera, Amber (Push Switch 980O 12volt Toyota Reverse Camera LED Amber on Off RAV4 Tacoma | eBay)
LED Light Bar, Amber (Push Switch 907O 12volt Toyota Replacement LED Light Bar Amber on Off RAV4 | eBay)

Fits the following models:
Toyota Sequoia 2008 - ON
Toyota Highlander 2008 - ON
Toyota Tacoma 2012 - ON Center ONLY
Toyota Tundra 2008 - ON
Toyota 4Runner 2010 - ON
Toyota RAV4 2008 - 2012
Toyota Yaris 2008

Asking $15 each. Local pickup available in the Colorado Springs area
 
Toytec Spacer 1" BAJA1-B NIB

FS: Toytec 1" Front Lift Spacer for TRD Black Anodized BAJA1-B

Pic:
bajalg-jpg.1147090


Link:
1" Front Lift for TRD BAJA and Pro Edition Tacoma & 4Runner's

Description:
These are unused and uninstalled. There re some minor handling, shipping, storage marks on them. Nothing that would affect its coating or function at all. It is as you would get them through the mail from Toytec.

I purchased the spacers in 2015 and never got around to installing them. A bit late for a return yet should have done a exchange for what I ended up doing. Hindsight is 20/20.

I wasn't going to upgrade my suspension beyond this. Yet went ahead and upgraded my springs. Yes, I could have used this with my other parts yet either way it gives me duplicate parts. Again hindsight.

So here is the deal I want to sell these puppies and know that someone on here is looking for a set to level out that all so awful rake on the TRD Pros.

I will post this up for sale starting today. You can PM me if you have any questions. You can look here, fj cruiser forums redfernsoljah, USN redfernsoljah, or ebay stephenandtawny if you want seller feedback. Which is all 100% btw and for items much more than this.

Price:
Looking at my receipt from Toytec I paid $165.02 for a pair of these shipped to me.

I would like to get $130 shipped or 20% off for a new unused part, my loss is you gain. Let me know if you have any questions.

Payment Terms:
Cash, Money Order, Paypal Gift

Shipment Terms:
USPS Flat Rate Small Box, Standard $50 insurance, 50 US states. We can talk about other shipment arrangements. Yet it will be on your dime. For OCONUS it is on your dime and your research, I will not be held liable for any issues with a shipment of this sort.
 
Does the Gobi ladder hit the FrontRunner rack when the liftgate is up?

Without upgrading the struts, the liftgate goes up about a foot less than before. It doesn't hit. I can push it up to where it normally was and it does hit on one of the ladder's vertical bars.

I'll see if I can take a pic to better show this.
 
Roof crossbars

Looking for a set of roof crossbars for a 2015 4runner. Shoot me a pm with what you have and a price shipped. I live in West Tennessee and could meet someone if you are close.
 
bump ^^^ make offer.





No writeup, but I'm happy to put one together once I have some results to share. I'm still in the early stages of planning though, so it might be a while. If you're main objective is just a drop-in replacement for the OEM unit, the best (easiest) option I've found so far is the Pioneer TS-SW2002D2. I haven't listened to it, but it has the right dimensions and bolt pattern and should drop right in. I think a JL Audio 8w3 might sound better, but will require at least some sort of adapter/spacer ring to fit. A third option that's piqued my interest is the Audiotec Fischer Helix E8W. It has the correct bolt pattern, but calls for a slightly larger mounting diameter. The enclosure might need some modification, but it looks doable.

If I use the OEM enclosure, I'll most likely go with the Pioneer just because it fits. Anything beyond that, as far as performance goes, I think will have diminishing returns due to limitations of the stock box. I'm also looking into building my own enclosure to mount in the OEM location, then cutting the outer panel to fit around it. I think I should be able to fit a 10" if I go that route. :)
i think you really want a dual 4ohm sub so when it's wired it presents a 2ohm total impedance for max efficiency. assuming you're not adding an additional amp, of course.
 
Sold

Hey guys/gals, tried selling this before but couldn't get anyone to bite. After giving up for a bit, I'm posting again and with a price drop. I'm asking $320 shipped (firm) to lower 48.

UCA's were installed and immediately removed, decided to go in another direction. Let me know if you have any questions.

Joseph

:dancin:
 

Attachments

  • 20160620_200447.jpg
    20160620_200447.jpg
    58.5 KB · Views: 743
  • 20160620_200356.jpg
    20160620_200356.jpg
    133.7 KB · Views: 747
  • 20160620_200556.jpg
    20160620_200556.jpg
    124.6 KB · Views: 752
Last edited:
Rigid Running Boards

Rigid Running Boards for Sale. They are in very good condition as I always took them off whenever going off-road. All hardware is included. These fit all 5th gen trail models and 2014+ SR5, and TRD Pro. These are the port add-ons, so you can't buy them aftermarket through dealers. MSRP $375...asking $200 firm. Local pick-up preferred but they are packed away in the box that my RCI sliders came in so I could ship on buyers dime. Here is a pic of them on my 4runner, if interested I can send more pics of them off the truck, just was too lazy to take them out of the box.

These running boards are excellent if you are looking for something that blends with the truck (no chrome), has a rugged look, and gives a full functional step. They can be used off-road, good for keeping debris off of the side of the vehicle, but just not rock sliding. IMO the best out there in terms of running boards.
 

Attachments

  • IMG_5707.jpg
    IMG_5707.jpg
    134.4 KB · Views: 743
  • IMG_4774.jpg
    IMG_4774.jpg
    139.1 KB · Views: 738
  • IMG_4909.jpg
    IMG_4909.jpg
    137.5 KB · Views: 738
FS: Toytec 1" Front Lift Spacer for TRD Black Anodized BAJA1-B

Pic:
bajalg-jpg.1147090


Link:
1" Front Lift for TRD BAJA and Pro Edition Tacoma & 4Runner's

Description:
These are unused and uninstalled. There re some minor handling, shipping, storage marks on them. Nothing that would affect its coating or function at all. It is as you would get them through the mail from Toytec.

I purchased the spacers in 2015 and never got around to installing them. A bit late for a return yet should have done a exchange for what I ended up doing. Hindsight is 20/20.

I wasn't going to upgrade my suspension beyond this. Yet went ahead and upgraded my springs. Yes, I could have used this with my other parts yet either way it gives me duplicate parts. Again hindsight.

So here is the deal I want to sell these puppies and know that someone on here is looking for a set to level out that all so awful rake on the TRD Pros.

I will post this up for sale starting today. You can PM me if you have any questions. You can look here, fj cruiser forums redfernsoljah, USN redfernsoljah, or ebay stephenandtawny if you want seller feedback. Which is all 100% btw and for items much more than this.

Price:
Looking at my receipt from Toytec I paid $165.02 for a pair of these shipped to me.

I would like to get $130 shipped or 20% off for a new unused part, my loss is you gain. Let me know if you have any questions.

Payment Terms:
Cash, Money Order, Paypal Gift

Shipment Terms:
USPS Flat Rate Small Box, Standard $50 insurance, 50 US states. We can talk about other shipment arrangements. Yet it will be on your dime. For OCONUS it is on your dime and your research, I will not be held liable for any issues with a shipment of this sort.
Hey Doc, I'll take em. PM incoming
 
** UPDATED: NO LONGER AVAILABLE. Shipping to SCO1. Thanks... **

"Trail" badges from Shapeways (you know, the same badges with the bigger "R" everyone is installing on their Trail editions). I got the matte black "flexible" ones. I since sold my T4R before installing the badges. FREE to first person to PM me name and address

FREE because that's my way of saying thanks to this forum for the helpful info in the short time I was here.

I will update this post once they are spoken for. [NO LONGER AVAILABLE]
 
Last edited:
"Trail" badges from Shapeways (you know, the same badges with the bigger "R" everyone is installing on their Trail editions). I got the matte black "flexible" ones. I since sold my T4R before installing the badges. FREE to first person to PM me name and address



FREE because that's my way of saying thanks to this forum for the helpful info in the short time I was here.



I will update this post once they are spoken for.



Pmd


Sent from my iPhone using Tapatalk
 
For Sale OEM gas tank skid plate. $50 plus shipping. Yes, it has scrapes and dents, but still works fine.

Includes all bots required for installation

f347d07d634116ecd10bf604ea5827f1.jpg
e6b876d14c2baa3b4ae64ecc9a7cf655.jpg
 
Stock 2016 Shocks

I have stock 2016 4Runner Shocks for front and rear. They have about 6000 miles on them. Looking to get rid of them for $40. Local Pick up in Los Angeles only.
 
For Sale: 14 Trail Premium w KDSS

This 4runner is my second vehicle and hardly ever gets driven. It is in excellent condition and is always garage kept. Still under factory warranty. I purchased it from it's original owner (an older gentleman in North Carolina. he didn't even know it had KDSS), neither him nor I have ever taken it off roading. I had a Toytec Boss suspension system professionally installed and it was the best $1400 upgrade I could have done. The ride quality over the original suspension is amazing. The BOSS suspension is a far superior suspension than the TRD pro suspension. I have the original suspension if you wanted to go back to factory. There is a tiny chip in the windshield on the passenger side low on the glass, below the line of sight. It was repaired by a glass professional but is still slightly visible. I have photos upon request.

Additional Upgrades: BRAND NEW Nitto Terra Grappler G2 tires, Canvasback Cargo Liner, WheatherTech floor mats, Roof Rack cross bars, TRD Pro Grill, N Fab side steps, center console organizer.

40,500 miles
$35,500

Serious Inquires only please.
Location: Charlotte, NC
Contact: [email protected]
 

Attachments

  • FullSizeRender (5).jpg
    FullSizeRender (5).jpg
    142.3 KB · Views: 1,664
  • frontend.jpg
    frontend.jpg
    139.2 KB · Views: 1,358

Members online

No members online now.

Forum statistics

Threads
278,315
Messages
3,554,104
Members
248,016
Latest member
Advally Service

Trending content

Back
Top