5th Gen For Sale/Wanted Thread

[SteadfastZach]

I have front and back TRD Off Road Mats, never used.

Price: Not sure whats fair, $129 new

Picture for reference, not my mats

Bumpity bump, How does $40 + Shipping sound?

 

[ishootcanon]

TRD Pro Wheels

Looking for 4 TRD Pro wheels. Does not matter what color they are.

Also, I'm new here and not sure if the bolt pattern or wheel sizes are different for 5th gen t4rs. I have a 2015 SR5 if that makes any difference. (will be looking this up now, google gunna teach me things!)

 

[Islandchanel]

WTB running boards for 2018 4Runner 4x4 sr5

If Anyone has a set of running boards they are looking to sell in good condition . Please let me know. I’m in Southern California.

 

[sn_85]

Selling my OME setup with ~11K on them. They've seen both on and off-road miles but have held up well. Fronts are all assembled and got new top hats when they were installed. Paint is a little pitted but that's common for OME and it survived a Utah salted winter. Easily fixed by some touch up paint. Otherwise functions perfectly. Got a new Icon kit this holiday season so I'm letting these go.

Front Struts - 90010
Front coils - 883 (~1.75 - 2" lift)
Rear Struts - 60080
Rear Coils - 895E (~1.5" lift)

Looking for $450 plus shipping. Local sale preferred in Salt Lake City. Shipping would be on your dime. The same setup from Wheelers assembled is $975 + S/H.

Still available!!!

 

[J_Mund0]

Complete 3" lift kit from Toytec. I purchased it directly from them and put <1000 miles. Includes Bilstein 5100 front and rear shocks and 2" rear HD coils. I added Airlift airbags to maintain the rake only when I was towing my boat. I left them in there if the buyer wants them or they can be removed. Everything is in good condition. Selling because I bought the icon suspension kit on black friday. Everything for $600

I Ran this kit with SPC UCA's which I'm selling separately which are recommended to maintain the factory specs.

3" Lift W/ Bilstein 5100 Front Coilovers FJ/4Runner/GX

Let me know if you still have this lift kit.

 

[DavidR1]

Looking for a TRD Pro skid plate if anybody has one they are looking to replace.

 

[itsdchz]

For sale- RCI Aluminum Skids powder coated black with or without TRD pro skid, see below:

I have a TRD Pro skid plate, and the RCI Aluminum skids for sale. TRD Pro Skid is currently on the 4Runner and the RCI Aluminum skids, powder coated blank, are completely brand new and still sealed in boxes. I am looking to sell the entire set. I will only break up if someone has the TRD Pro skid and needs only ALL the RCIs. I am not looking to ship, however if you are willing to pay the fees, I can arrange, but probably not cheap.

This includes the Cross member as well. That is the long box pixtured.
http://www.rcimetalworks.com/10-18-4Runner-Full-Skid-Package-Deal-T4R-10-14-05.htm

I am in Central California-

1 - TRD Pro skid

1 - T4R-10-13-02-14ALBK | 10-18 4Runner Transmission Skid Plate
Material: 1/4" 5052 Aluminum Powder Coat

1 - T4R-10-13-03-14ALBK | 10-18 4Runner Transfer Case
Material: 1/4" 5052 Aluminum / Black Powder Coat

1 - TRD-IP-14ALBK TRD Integration Skid. Material: 1/4" 5052 Aluminum Powder Coat

I paid $775 for the RCIs
I will sell everything, <b>including</b> the TRD Skid for $750.00

Sent from my iPhone using Tapatalk

 

[Spudgey]

Looking to buy a set of Dobinson C59-675V rear springs.

Located in Denver but willing to drive a bit to purchase them.

Thanks!

 

[itsdchz]

Drabbits Full Length Roof Rack Used

I am looking to sell my Drabbits Full Length Roof Rack with Sunroof Cutout. Right now I will sell it without the front and rear lights, and no other mounts. Just the rack. If you want the lights and mounts for lights, we can work something out. I will be keeping all other attachments.

Obviously looking for local pickup in Central California, as to ship it may get damaged. Everything isa perfect as far as I know, but it has been on the vehicle for 2 years so may have weathering or wear where mounts are. This is a great opportunity. There has not been one issue on the rack.

Looking to get $750

This is the complete rack with all hardware to mount and fairing.

Write up and install info here:

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933266

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933269

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933272

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-5.html#post1933273

 

[jbjones85]

I want just on the wrong side of the country, if you change your mind on freighting it let me know.

I am looking to sell my Drabbits Full Length Roof Rack with Sunroof Cutout. Right now I will sell it without the front and rear lights, and no other mounts. Just the rack. If you want the lights and mounts for lights, we can work something out. I will be keeping all other attachments.

Obviously looking for local pickup in Central California, as to ship it may get damaged. Everything isa perfect as far as I know, but it has been on the vehicle for 2 years so may have weathering or wear where mounts are. This is a great opportunity. There has not been one issue on the rack.

Looking to get $750

This is the complete rack with all hardware to mount and fairing.

Write up and install info here:

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933266

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933269

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933272

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-5.html#post1933273

 

[itsdchz]

I want just on the wrong side of the country, if you change your mind on freighting it let me know.

I can ship, but it would be at your expense. I am sure it would be $200 easy...

 

[itsdchz]

SSO LoPro Bumper with hoop - TRD Pro - Bumper Swap

I am selling my SSO Lo Pro Bumper with Hoop, 30" SR cutout, made for the TRD Pro model to allow for the TRD Pro Skid. This has been on the vehicle for less than 5 months. IT is powder coated from SSO Black.

The SSO bumper will NOT include the D-Links, Light, or Winch. All mounting hardware for bumper will be included. However, here is the catch:

I need you to trade my Super White bumper and SSO with your Super White excellent condition bumper, and support, as I am putting vehicle back to stock, and cannot sell it with a gaping hole in the bumper. MY OEM bumper will include OEM fogs with Lumin-X cover as shown above, and it will also have 2 extra holes from where the Bushwacker mounts on lower corners (see sig pic for location of lowest bolt). I will include the new Aiden James DRLs, or the OLD dead ones as seen in the pic shown, depending on your bumper condition, and other terms.
This is why local pickup and a few hours would be needed for the swap, or you come with the bumper, support and hardware, we remove SSO and my bumper and send you on your way. Located in Central Valley, CA - FRESNO Area

I am selling this for VERY cheap even though it is near new to offset the hassle. If not bumper will be sold with the vehicle.

Looking to get $500 for the deal and swap.. Yes you read right- $500, but it must meet above stipulations.

 

[itsdchz]

Should I just put the entire 4Runner out there for sale? (minus the 30" light, winch, Baja Squadrons, TREDs, shovel, axe, high lift and other non bolted items)?

First $30,000 OBO takes it?

That is only $2,000 higher the private party sale with no mods?

 

[HeartGuy]

Should I just put the entire 4Runner out there for sale? (minus the 30" light, winch, Baja Squadrons, TREDs, shovel, axe, high lift and other non bolted items)?

First $30,000 OBO takes it?

That is only $2,000 higher the private party sale with no mods?

What's next?

 

[perf0rmance]

Should I just put the entire 4Runner out there for sale? (minus the 30" light, winch, Baja Squadrons, TREDs, shovel, axe, high lift and other non bolted items)?

First $30,000 OBO takes it?

That is only $2,000 higher the private party sale with no mods?

Easily less headache, but you'd be hard-pressed to find the right buyer. If you're willing to sit a bit, you might be able to get sold for that fair asking price, considering the mods.

Parting it out ensure you'll get a return on items much quicker, also making your vehicle appeal to a larger crowd (those that may actually want a stock t4r).

Good luck either way!

 

[Nashville5thGen]

I am selling my SSO Lo Pro Bumper with Hoop, 30" SR cutout, made for the TRD Pro model to allow for the TRD Pro Skid. This has been on the vehicle for less than 5 months. IT is powder coated from SSO Black.

The SSO bumper will NOT include the D-Links, Light, or Winch. All mounting hardware for bumper will be included. However, here is the catch:

I need you to trade my Super White bumper and SSO with your Super White excellent condition bumper, and support, as I am putting vehicle back to stock, and cannot sell it with a gaping hole in the bumper. MY OEM bumper will include OEM fogs with Lumin-X cover as shown above, and it will also have 2 extra holes from where the Bushwacker mounts on lower corners (see sig pic for location of lowest bolt). I will include the new Aiden James DRLs, or the OLD dead ones as seen in the pic shown, depending on your bumper condition, and other terms.
This is why local pickup and a few hours would be needed for the swap, or you come with the bumper, support and hardware, we remove SSO and my bumper and send you on your way.

I am selling this for VERY cheap even though it is near new to offset the hassle. If not bumper will be sold with the vehicle.

Looking to get $500 for the deal and swap.. Yes you read right- $500, but it must meet above stipulations.

If this was magnetic grey I'd be on my way.

 

[itsdchz]

Easily less headache, but you'd be hard-pressed to find the right buyer. If you're willing to sit a bit, you might be able to get sold for that fair asking price, considering the mods.

Parting it out ensure you'll get a return on items much quicker, also making your vehicle appeal to a larger crowd (those that may actually want a stock t4r).

Good luck either way!

The price is giving away almost all the mods.. I was amazed at the value stock!

 

[itsdchz]

What's next?

'18 Tundra- Still may be keeping the 4Runner, as this was my "I'll keep it forever rig"

 

[Timberlinhvo]

Should I just put the entire 4Runner out there for sale? (minus the 30" light, winch, Baja Squadrons, TREDs, shovel, axe, high lift and other non bolted items)?

First $30,000 OBO takes it?

That is only $2,000 higher the private party sale with no mods?

WHYYYYYY OH WHYYYY!! Easily one of the most tastefully modded and cleanest (clean as in mean) rig on here. :shocked::shocked::shocked:

 

[Ricky_Medina]

I am looking to sell my Drabbits Full Length Roof Rack with Sunroof Cutout. Right now I will sell it without the front and rear lights, and no other mounts. Just the rack. If you want the lights and mounts for lights, we can work something out. I will be keeping all other attachments.

Obviously looking for local pickup in Central California, as to ship it may get damaged. Everything isa perfect as far as I know, but it has been on the vehicle for 2 years so may have weathering or wear where mounts are. This is a great opportunity. There has not been one issue on the rack.

Looking to get $750

This is the complete rack with all hardware to mount and fairing.

Write up and install info here:

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933266

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933269

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-4.html#post1933272

http://www.toyota-4runner.org/5th-gen-t4rs/185512-itsdchz-2015-sr5-p-build-thread-5.html#post1933273

Pm sent!

Sent from my SM-G950U using Tapatalk