5th Gen For Sale/Wanted Thread

[Con10der_8]

I am selling my SSO Lo Pro Bumper with Hoop, 30" SR cutout, made for the TRD Pro model to allow for the TRD Pro Skid. This has been on the vehicle for less than 5 months. IT is powder coated from SSO Black.

The SSO bumper will NOT include the D-Links, Light, or Winch. All mounting hardware for bumper will be included. However, here is the catch:

I need you to trade my Super White bumper and SSO with your Super White excellent condition bumper, and support, as I am putting vehicle back to stock, and cannot sell it with a gaping hole in the bumper. MY OEM bumper will include OEM fogs with Lumin-X cover as shown above, and it will also have 2 extra holes from where the Bushwacker mounts on lower corners (see sig pic for location of lowest bolt). I will include the new Aiden James DRLs, or the OLD dead ones as seen in the pic shown, depending on your bumper condition, and other terms.
This is why local pickup and a few hours would be needed for the swap, or you come with the bumper, support and hardware, we remove SSO and my bumper and send you on your way.

I am selling this for VERY cheap even though it is near new to offset the hassle. If not bumper will be sold with the vehicle.

Looking to get $500 for the deal and swap.. Yes you read right- $500, but it must meet above stipulations.

Oh my god if I only Have a white bumper ..I’ll be on my way now

 

[Mr.E.Poo]

If Anyone has a set of running boards they are looking to sell in good condition . Please let me know. I’m in Southern California.

I have TRD Pro Predator tubes/steps if you're interested. They are a week old and I've already scratched them! lol. I'll send pics if you're interested.

 

[Shambilambi5]

Still available!

I have an unused Cali Raised 32" light bar and hidden bracket kit. Comes with the wiring harness and relay mount as well. All brand new and unused. Paid $300 so looking to get my money back.

Willing to meet around the Central Valley and Bay Area otherwise I will spit shipping with the buyer.

 

[Shambilambi5]

Shocks still available!

New unused Bilstein 5100 series front shocks.

$150 for the shocks.

Willing to meet around the Central Valley and Bay Area.

 

[dangerdonkey]

Should I just put the entire 4Runner out there for sale? (minus the 30" light, winch, Baja Squadrons, TREDs, shovel, axe, high lift and other non bolted items)?

First $30,000 OBO takes it?

That is only $2,000 higher the private party sale with no mods?

I might hvae a buyer for you. How many miles?

 

[honda250xtitan]

I am selling my SSO Lo Pro Bumper with Hoop, 30" SR cutout, made for the TRD Pro model to allow for the TRD Pro Skid. This has been on the vehicle for less than 5 months. IT is powder coated from SSO Black.

The SSO bumper will NOT include the D-Links, Light, or Winch. All mounting hardware for bumper will be included. However, here is the catch:

I need you to trade my Super White bumper and SSO with your Super White excellent condition bumper, and support, as I am putting vehicle back to stock, and cannot sell it with a gaping hole in the bumper. MY OEM bumper will include OEM fogs with Lumin-X cover as shown above, and it will also have 2 extra holes from where the Bushwacker mounts on lower corners (see sig pic for location of lowest bolt). I will include the new Aiden James DRLs, or the OLD dead ones as seen in the pic shown, depending on your bumper condition, and other terms.
This is why local pickup and a few hours would be needed for the swap, or you come with the bumper, support and hardware, we remove SSO and my bumper and send you on your way.

I am selling this for VERY cheap even though it is near new to offset the hassle. If not bumper will be sold with the vehicle.

Looking to get $500 for the deal and swap.. Yes you read right- $500, but it must meet above stipulations.

mehhhhhhh why not in az lol


GLWS.

 

[Ocean Hitchhiker]

I am selling my SSO Lo Pro Bumper with Hoop, 30" SR cutout, made for the TRD Pro model to allow for the TRD Pro Skid. This has been on the vehicle for less than 5 months. IT is powder coated from SSO Black.



The SSO bumper will NOT include the D-Links, Light, or Winch. All mounting hardware for bumper will be included. However, here is the catch:



I need you to trade my Super White bumper and SSO with your Super White excellent condition bumper, and support, as I am putting vehicle back to stock, and cannot sell it with a gaping hole in the bumper. MY OEM bumper will include OEM fogs with Lumin-X cover as shown above, and it will also have 2 extra holes from where the Bushwacker mounts on lower corners (see sig pic for location of lowest bolt). I will include the new Aiden James DRLs, or the OLD dead ones as seen in the pic shown, depending on your bumper condition, and other terms.

This is why local pickup and a few hours would be needed for the swap, or you come with the bumper, support and hardware, we remove SSO and my bumper and send you on your way.



I am selling this for VERY cheap even though it is near new to offset the hassle. If not bumper will be sold with the vehicle.



Looking to get $500 for the deal and swap.. Yes you read right- $500, but it must meet above stipulations.

Where are you located??


Sent from my iPhone using Tapatalk

 

[itsdchz]

I might hvae a buyer for you. How many miles?

70,000 miles with oil at every 5k, yes, every 5k. All major services done, and I have new SPC ball joints with zerks waiting for new owner, to be safe!

Yes lots of miles, but we have driven across the country numerous times!

 

[itsdchz]

Where are you located??


Sent from my iPhone using Tapatalk

Central Valley, California

 

[Ocean Hitchhiker]

Central Valley, California

Damn, too far. I would have met up with you tomorrow if you were closer.


Sent from my iPhone using Tapatalk

 

[KY5thGen]

Still available!!!

Can you send me a couple pics? 9372442873 thanks!


Sent from my iPhone using Tapatalk

 

[KY5thGen]

Can you send me a couple pics? 9372442873 thanks!


Sent from my iPhone using Tapatalk

Sorry, 9372442872, fat thumbs....


Sent from my iPhone using Tapatalk

 

[Gerh45]

Brand new Bridgestone Dueler P265/70R17 Tires and Suspension

Guys,
Selling stock tires and suspension on a 2018 4runner SR5 premium. Tires and suspension have less than 100 miles.

Asking $450 for the 4 tires

For the shocks front and rear i am asking $400 for all 4 shocks and 4 coil springs.

 

[lucasngo]

FS: 5th gen C4 Fab Lopro Bumper (RAW) - SoCal

- C4 Fab Lopro Bumper, Full height bull bar with gussets, license plate mount, TRD wording, no led cutout
- Brand New, (RAW)
- $900.00
- Local SoCal Pick up ONLY

Skip the production wait and buy it now! :bravo:

Please PM me.

Thanks

 

[sn_85]

Sorry, 9372442872, fat thumbs....


Sent from my iPhone using Tapatalk

Pics are in the original post here
http://www.toyota-4runner.org/5th-gen-t4rs/80618-5th-gen-sale-wanted-thread-831.html#post2877944

 

[Yeti4x4_970]

2010-2013 trail headlights

ISO 2010-13 trail headlights. In the process of wet sanding and cleaning them up but considering doing a retrofit.

 

[warhound]

WTB rear bumper

Looking for a steel rear bumper, added a lift with heavy duty springs in anticipation of a rear bumper, but now I need one ASAP. Open to any brand, dual or single swingout.

 

[Bodhi327]

FS: Revtek Light Mount bar. New Jersey

New never used

125.00 pick up in Jersey. Made for 5th gen, bolt on, no drilling.

 

[xarjayx]

Complete 3" lift kit from Toytec. I purchased it directly from them and put <1000 miles. Includes Bilstein 5100 front and rear shocks and 2" rear HD coils. I added Airlift airbags to maintain the rake only when I was towing my boat. I left them in there if the buyer wants them or they can be removed. Everything is in good condition. Selling because I bought the icon suspension kit on black friday. Everything for $600

I Ran this kit with SPC UCA's which I'm selling separately which are recommended to maintain the factory specs.

3" Lift W/ Bilstein 5100 Front Coilovers FJ/4Runner/GX

is it still available???

 

[Xiongb]

Selling my OME setup with ~11K on them. They've seen both on and off-road miles but have held up well. Fronts are all assembled and got new top hats when they were installed. Paint is a little pitted but that's common for OME and it survived a Utah salted winter. Easily fixed by some touch up paint. Otherwise functions perfectly. Got a new Icon kit this holiday season so I'm letting these go.

Front Struts - 90010
Front coils - 883 (~1.75 - 2" lift)
Rear Struts - 60080
Rear Coils - 895E (~1.5" lift)

Looking for $450 plus shipping. Local sale preferred in Salt Lake City. Shipping would be on your dime. The same setup from Wheelers assembled is $975 + S/H.

Hello, are these still available, I am interested. If so please text me at 5303012864. Thank you lol was trying to reach you so I added you to my contacts by accident.