5th Gen For Sale/Wanted Thread

2016 Trail rims

I’ve got a set of 4 2016 Trail edition rims that have less than 100 miles on them. I’m located in Northern California and would rather not ship them. Looking for $500 OBO.
 
Anyone in Central Florida near the coast interested in a single Trail Rim to replace their spare steel rim?

Found a set of four online but only want one rim. Would buy the whole set if some others were interested also.

They are new takeoffs from a 2018. I need one so when I get bigger tires I can rotate all 5 tires to get more mileage out of them.

jil3EhX.jpg
PM me thanks


Seeing as no interest, could have picked up the set for $350 plus gas to Daytona, going to order a single rim from Conicelli Toyota for $306 shipped.
 
2016 TRD Pro Suspension SoCal

just took my TRD Pro suspension off, 38,000 miles. I have a Dobinsons 1"+ spring on the fronts as well as the original stock front coils in the garage. located in SoCal, i'll have pics this evening after work. Prefer a local buyer, would consider shipping at buyers cost.
 
TRD Pro Wheels

Still looking for a set of 4 TRD Pro Wheels - black. Willing to drive a bit a ways.

Would be trading stock SR5 Wheels plus cash or just cash.
 
SOLD I have a brand new set of Wheelers T13 rear springs available (Wheelers p/n WOR COIL-T13). Never installed, went a different route with my lift. I will ship on your dime. $130 OBO

SOLD I also have (2) OME 10mm rear trim packers, unused. OME part# OME 150PRO10. I will ship on your dime. $10 ea

Located centrally in MD.

Thanks everyone on here. T4R.org made these transactions swift and easy! Glad to be part of the fam here!
 
OEM JBL Sub Enclosure For Sale

Sold

oem jbl sub enclosure for sale. No speaker.


Part# 86150-0w120

pm me if interested. I don't follow this thread.

Brand new, never installed. The right mounting tab snapped off when it was shipped to be. Good news is, the tab was in the box, it's a clean break and can be reattached easily. There's no woofer included, but i do have its original mounting screws. In case anyone is curious, depth is around 3 9/16 and volume is approx 12l.

Pics:

https://imgur.com/hz5beol
https://imgur.com/iowpyrq
https://imgur.com/lzmzpio
 
Last edited:
Hey man, I'd take one of those 4 but would need it shipped to Philadelphia.

Hey thanks for your interest, Ryan.

A new alloy OR rim from Concielli Toyota shipped is about $309.00. Think they are charging $20.00 for shipping, which is pretty good, would like to know who they are shipping with.

If we could get at least one more person to go in on these rims think it would be worthwhile to spend my time and fuel to go pick these up.

With three peeps the price would be about $125 each plus shipping. 4 peeps would be better only $90 a piece.

We could do paypal, check out my ebay handle Jamess9286 for my rep. Wont steer you wrong.

Told the seller I am still interested if we could get another buyer. Otherwise I may still go the Toyota route.
 
I’m going to be trading my truck in and want to bring back to stock. If someone has stock 5th gen wheels and tires and wants to swap SCS wheels and bfg tires with great tread (about 75%) I will swap for 900.00




Sent from my iPhone using Tapatalk
75c77546af4eaa5ed366f21986436918.jpg
 
Wish you where closer

I’m going to be trading my truck in and want to bring back to stock. If someone has stock 5th gen wheels and tires and wants to swap SCS wheels and bfg tires with great tread (about 75%) I will swap for 900.00




Sent from my iPhone using Tapatalk
75c77546af4eaa5ed366f21986436918.jpg

I would buy that rack, wheels and sliders
 
3rd row seats

Anybody in the DFW (North Texas) area interested in 3rd row seating? Not sure how much I would want for them yet.

We would need to confirm that swapping out all the interior panels and 2nd row seats as well is all that would need to be done. I have been unable to confirm this through my searches.

Your seats and panels would need to be black and gray (or solid black seats at least, but mine are black with the gray middle), smoke free, and in good condition. Mine are in a 16' SR5 with 30k miles.

FYI: The 2nd row seats would need to be swapped too because they work differently between the 2 setups.

Is anybody interested and can anybody confirm it is possible?

P.S. Why don't I get email alerts from this thread even though I am subscribed?
 
Last edited:
Anybody in the DFW (North Texas) area interested in 3rd row seating? Not sure how much I would want for them yet.

We would need to confirm that swapping out all the interior panels and 2nd row seats as well is all that would need to be done. I have been unable to confirm this through my searches.

Your seats and panels would need to be black and gray (or solid black seats at least, but mine are black with the gray middle), smoke free, and in good condition. Mine are in a 16' SR5 with 30k miles.

FYI: The 2nd row seats would need to be swapped too because they work differently between the 2 setups.

Is anybody interested and can anybody confirm it is possible?

P.S. Why don't I get email alerts from this thread even though I am subscribed?


A little more complicated if youre swapping the 2nd row as well as all the side panels would need to be swapped out also.
 
A little more complicated if youre swapping the 2nd row as well as all the side panels would need to be swapped out also.

You have to swap the side panels anyway don't you?....if you want everything to look right and want the 3rd row seat belts to work properly.

Another option I'm looking at would be to just remove them and come up with a simple solution to cover all the bare spots in a non permanent way. This way I can reinstall them down the road.
 
I’m going to be trading my truck in and want to bring back to stock. If someone has stock 5th gen wheels and tires and wants to swap SCS wheels and bfg tires with great tread (about 75%) I will swap for 900.00




Sent from my iPhone using Tapatalk
75c77546af4eaa5ed366f21986436918.jpg

what size? selling anything else?
 
I am so brand new I just created a login! I would take one of those too, but would need it shipped to California.

GMISK because your brand new I would still need one other person to be interested for me to pick these up and ship out. Don't want to be stuck with 3 rims if you don't turn out to be a real interested party. (Trolls)

Just FYI you would have to pay the shipping to CA


edit; GMISK btw welcome to the forum, should have said that first, was so tired last night when I got home though. Look forward to working with you GMISK
 
Last edited:
Anyone in Central Florida near the coast interested in a single Trail Rim to replace their spare steel rim?

Found a set of four online but only want one rim. Would buy the whole set if some others were interested also.

They are new takeoffs from a 2018. I need one so when I get bigger tires I can rotate all 5 tires to get more mileage out of them.

jil3EhX.jpg
PM me thanks

Just a bump, am looking for one more person interested in New Off Road 2108 take-off rim for a spare. Only need one myself.

Gibburns and GMISK are so far interested. 4 peeps would equal $94 a piece plus shipping (bad math earlier when I posted $90) and $125 ea for 3 peeps in case GMISK is not real. Only wanting to make up $25 for gas to go get these. Will donate my time.
 
FS- Gobi Stealth Rack - CT

Rack plus ladder for sale - $900. Not willing to sell separately. Never connected lights to the rack so wiring is as from factory.

Able to travel a reasonable distance to meet buyer. Located in Southeast CT near RI boarder. Can ship at buyers expense.
 

Attachments

  • 4Runner gobi 1.jpg
    4Runner gobi 1.jpg
    94.5 KB · Views: 1,465
  • 4Runner gobi 2.jpeg
    4Runner gobi 2.jpeg
    85.9 KB · Views: 1,449
  • 4Runner gobi 3.jpeg
    4Runner gobi 3.jpeg
    94 KB · Views: 1,431
  • 4Runner gobi 4.jpeg
    4Runner gobi 4.jpeg
    83.5 KB · Views: 1,467
Rack plus ladder for sale - $900. Not willing to sell separately. Never connected lights to the rack so wiring is as from factory.

Able to travel a reasonable distance to meet buyer. Located in Southeast CT near RI boarder. Can ship at buyers expense.

If I didn't plan to mount lights on the rack would this be the wrong setup?
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,105
Members
248,016
Latest member
Advally Service

Trending content

Back
Top