5th Gen For Sale/Wanted Thread

[Zeusmotorworks]

I am selling the OEM skid plate that was taken off a 2017 TRD Pro 4Runner. The skid was removed around 20k miles and replaced with an aftermarket engine skid to fit a replacement bumper.

I am happy to look into shipping but buyer pays and it’s pretty heavy.

Located in Austin, TX PM for pictures. Thanks

How much? In Lago and might be interested if the price is right.

 

[Kamil]

Ugh. Thanks.

 

[On Point]

I have a brand new set of of custom made drawers for the back of my 2018 Toyota 4Runner. It has two drawers and a sleeping extension to make it level. I am asking $500 but willing to take a little less or trade for a YETI Cooler, Go Pro and a little cash! Message me for more details.

Here are the materials and how much it was to make. It took me one full day day to make.
- 3 sheets of 3/4” plywood $50 each
- 1 sheet of 1/4” maple plywood $50
- 1 2x6 $10 total
- 2 drawer slide $50 each
- bolts and other hardware $20 total
- front handles $15 total
- carpet $20 total
The total for it all is $365

It fits perfectly behind the seat and the seats can still go up. If you want it to be a level surface with the seats down, just add in the sleeping extension.

Located in Pittsboro, NC. Will travel a little bit. Message me!

Where did you buy your material at? Pottery Barn?

 

[Pschnei3]

Fs 2019 off road wheels CLEVELAND ohio

New take offs from my 2019 off road. Wanted to get $800

Cleveland Ohio.

 

[moshie]

Where did you buy your material at? Pottery Barn?

Haha! It felt like it...Lowes! hwell:

 

[Bpfish]

How much? In Lago and might be interested if the price is right.

Sent you a PM but am open to offers.

 

[Hybryd40]

Bilstein 5160 Reservoir Clamps

Good condition, used 50.00 shipped. Indiana

 

[Hybryd40]

One Bilstein 5160

1-Bilstein 5160
13,800 miles on shock. No leaks, just a little dirty good working condition. Make a great spare 75.00 shipped
Indiana

 

[TRD_Mike]

Front Runner High Lift Jack Mount

BNIB Front Runner High lift Jack mount $80 Shipped.

 

[97BlackAckCL]

Rago Rock Light Brackets

FS: Rago Baja Designs Rock Light Brackets (4) BNIB - $50 shipped - Pittsburgh, PA - Toyota 4Runner Forum - Largest 4Runner Forum

bump

 

[97BlackAckCL]

Brand New Peak 7443 Amber LED bulbs

BNIB - These sell for $35 new plus shipping. - Selling for $30 shipped

Brand New Morimoto LED Load Resistor

BNIB - These sell for $15 new plus shipping - Will sell for $15 shipped. These are heavy duty and a lot better and produce way less heat than the cheap gold resistor alternatives.

Will sell together for $40 shipped. Items are brand new and never used. Everything you need to upgrade your front turn signals to LED with no hyperflash. Let me know if interested


https://www.toyota-4runner.org/for-sale-non-t4r-items/268170-fs-peak-7443-amber-led-bulbs-morimoto-led-load-resistors-$40-pittsburgh-pa.html#post3221889

bump

 

[97BlackAckCL]

Still have my OEM heated mirrors if anyone needs them

FS: 5th Gen OEM Heated Mirrors L&R - $50 Pittsburgh, PA

bump

 

[dna44]

2017 TRD Off Road - well equipped - $43k

16k miles, Dobinson's MRR front coilovers, SPC UCA's, Pelfreybilt Aluminum front bumper with Baja Designs Squadron Sport LED's, RCI Sliders, ARB Safari snorkel, Yakima Jetstream roof bars with fairing, Rago CB antenna mount, Dobinsons heavy duty rear springs and Dobinsons rear shocks, TRD Pro upper grille, FJ60 emblem mounted on custom bracket, 285 BFG KO2's.

I have the stock bumper, beam, and upper grille as well as the stock suspension.

Truck is located in Austin, TX. Prefer local pickup or buyer can arrange shipping.

I'm happy to provide any additional details or pictures on request. PM me on here or text me at nine-7-eight eight-5-5 zero-7-four-9

Edit - not sure why the images aren't showing up. Here's the album on imgur - Imgur: The magic of the Internet

 

[roborob1969]

*SOLD*: Dobinsons C59-599 Rear Coil Spring

*SOLD 09-FEB-2019*

Up for grabs -- Dallas Pickup

I was going to go with a very modest lift, but ended up going with the Icon Stage 2 kit.

I paid $175 + $30 Shipping -- I'll let these go for $150 or consider a trade for something (4Runner related).

These are still in the box -

DOBINSONS C59-599 REAR COIL SPRINGS FOR TOYOTA 4RUNNER AND FJ CRUISER - BLACK

Description
Gives this lift and suits these models:

1.25″ – Toyota 4Runner 2003 to 2017 Light Load to 100LBS Load (low height lift)

1.75″ – Toyota FJ Cruiser 2006-2015 Light Load

 

[Sordidtacoma]

Bump

 

[rayofsi]

Free: Ecotechne Rack 5th gen 4runner -Toms River, NJ

First gen Ecotechne Rack free ***NO LONGER AVAILABLE!!! PICKED UP**

heres the catch.
Must pick up the side rails in Toms River, NJ
The rest of the rack is at my home in Staten Island, NY

Side Rails must be picked up by tomorrow 5pm. At the shop i used in Toms River, NJ

Do not message me if you cannot pick up the side rails.

This is Free, there is some rust on the powdercoat.
This is the first gen Ecotechne Rack. Had to take it off because it interfered with my TJM Snorkel

 

[ehcanadian]

First gen Ecotechne Rack free

heres the catch.
Must pick up the side rails in Toms River, NJ
The rest of the rack is at my home in Staten Island, NY

Side Rails must be picked up by tomorrow 5pm. At the shop i used in Toms River, NJ

Do not message me if you cannot pick up the side rails.

This is Free, there is some rust on the powdercoat.
This is the first gen Ecotechne Rack. Had to take it off because it interfered with my TJM Snorkel

Just sent you a PM

 

[max rockatansky]

running boards

OE running boards. I took them off the 2018 4Runner a few days after I got it, installed N-Fabs (those are going up next) and then onto RSG sliders.

$100

Local pick up. I'm located in Chico, CA, but I'm also in Auburn sometimes too.

 

[pheelmeh]

If you were in the southwest i'd totally pick this up. Best of luck man!

I have a brand new set of of custom made drawers for the back of my 2018 Toyota 4Runner. It has two drawers and a sleeping extension to make it level. I am asking $500 but willing to take a little less or trade for a YETI Cooler, Go Pro and a little cash! Message me for more details.

Here are the materials and how much it was to make. It took me one full day day to make.
- 3 sheets of 3/4” plywood $50 each
- 1 sheet of 1/4” maple plywood $50
- 1 2x6 $10 total
- 2 drawer slide $50 each
- bolts and other hardware $20 total
- front handles $15 total
- carpet $20 total
The total for it all is $365

It fits perfectly behind the seat and the seats can still go up. If you want it to be a level surface with the seats down, just add in the sleeping extension.

Located in Pittsboro, NC. Will travel a little bit. Message me!

 

[Vongoldie]

Pm sent

Looking to sell the Bilstein suspension I removed from my 2018 4Runner TRD Pro. Removed them about 24k miles due to move to Toytec lift. Having issues uploading pictures here, can text them if requested.

*Does not have rear springs*

Also have the take off tires, probably 50% tread left. $100 for them all.

Located in Northwest Arkansas. Will not ship, will travel within 2 hours.*

pm sent