5th Gen For Sale/Wanted Thread

[Bigbriman]

Misc 5th Gen parts

Sold my 2011 Limited, got some parts left over. Priced to get out of my garage, make me a reasonable offer:

-OEM all-weather floormats ($35 plus shipping)
-OEM all-weather cargo mat ($20 plus shipping)
-OEM roof rack with crossbars plastidipped black ($25 plus shipping)
-OEM shift knob ($5 plus shipping)
-OEM suspension, shocks and springs ($10 plus shipping)

-40" Extreme LED lightbar ($75 plus shipping)

 

[Josh_357]

Sold.

Have a set of 4 hub centric wheel spacers that are 1-1/8" (28mm) thick. These are custom ordered from Custom Wheel Adapters, Wheel Spacers, Hub Rings for your car! | Motorsport Tech . Since they are 1/8" less than Spidertrax spacers, they are slightly less likely to rub tires but visually look very similar. These are the thinnest spacers that will keep the rear studs flush so you can run any wheel you want and not need to trim the studs. I went with new wheels recently and now these are just paper weights for me.

Asking $120 shipped to lower 48, PM me for paypal.

 

[hrjaw]

Sold my 2011 Limited, got some parts left over. Priced to get out of my garage, make me a reasonable offer:

-OEM all-weather floormats ($35 plus shipping)
-OEM all-weather cargo mat ($20 plus shipping)
-OEM roof rack with crossbars plastidipped black ($25 plus shipping)
-OEM shift knob ($5 plus shipping)
-OEM suspension, shocks and springs ($10 plus shipping)

-40" Extreme LED lightbar ($75 plus shipping)

would the crossbars fit a 2019 and if so, would you consider selling just the crossbar?

Roger

 

[@jrfordlandia]

I have some 2015 Trail wheels for sale in Austin/Round Rock, TX. Looking to get $250 picked up. Center caps are included, but they are rattle canned a darker grey.

Interested. If you still have these on Mother’s Day weekend, I can meet you in Austin (on that Saturday) if you’re in town. I’m coming from Houston but I’ll be in San Antonio. Swinging by Austin is not a problem.

 

[joesrcool]

Traded in the 4Runner for a Taco, and now I need to buy Taco parts. I would prefer local/regional pick up (I'll meet halfway) to the Kansas City or surrounding areas. Shipping would be extra. Feel free to make offers!

Custom built shelf $75
Works best with factory slider. Not fancy by any means, but quite functional. Made from MDF and painted with a black deck coating. You can have the remaining deck coating (2/3 gallon) if you'd like.

Slumberjack Roadhouse Tarp $75
Used a couple of times. Super handy awning and extremely versatile.

Raingler EZ Install Cargo Attic (Extended) $175
Raingler shipped me the wrong one originally and upgraded me to this hybrid mesh/webbing version. I'll sell it for what I paid for the standard mesh version.

Toytech Bump Stop Extensions $40 SOLD
Used, but should function just fine. Bolts included.

Factory Toyota CV's $50ea
Used, but it good condition. Boots are in great shape. Great for a spare to have on hand.

Toyota Roof Rack Delete Kit $20 SOLD
All the hardware needed to complete the roof rack delete.

ProClip Mount w/ RAM Ball $25 Pending Sale
Used it to hold my iPad and it worked fantastic. Would need new adhesive.

I've still got a few items if anyone is interested. :cheers:

 

[Ox_1722]

Wheelers Off-road / Eibach T-13 rear springs for sale. Purchased new a couple of weeks ago, and gives about 1 inch of rear lift. On for less than 100 miles.

Located near Atlanta, Georgia. $140 shipped.


Sent from my iPad using Tapatalk

PM'd

 

[garface]

I have a set of Icon 2" rear springs for sale. Used for 1year/ 20k miles. No issues, I just decided that it ended up a little taller than I needed, so I changed to Wheeler's T13's.
Would prefer to pick up/drop off locally, but I have the packaging from my T13s and can ship if needed. I basically live on the 405 from santa monica to huntington beach between where I live and where my girlfriend lives and mobile work, so I can meet anywhere.
I'd like to get ~ $150 for them. shoot me a message!

 

[4runr30]

FS: Trail Rockers- Johnson City, TN $175

Selling a set of 5th gen trail rocker panels. These will clean up nicely. Normal wear without any large scratches or gouges. One of the mounting clips is partially broken (see photo), but should not interfere with mounting. I have also added a screw to each front mount that screws up into the rocker itself (Zoom in on the photo). This was done to tighten the fit between the two pieces. The screws aren’t noticeable once mounted. Asking $175, Will take best offer. Local pick up only.

 

[KEVIN C.]

Cornfed spacer pair with install nuts for sale. Gives a 1" front lift and a simple way to level your 4Runner. On for about 25,000 miles.

Located near Atlanta, Georgia. $30 shipped.

Cornfed spacer for 1" front lift is still available. Price drop to $30.

 

[itsjaredj]

I have a White 2016 Trail Ed. Front Bumper for sale located in Phoenix, AZ. Perfer locate pickup. Other than a couple Trail scratches bumper is in great shape.



$350 local pickup...

Interested. Trying to figure out how to PM from iPhone.


Sent from my iPhone using Tapatalk

 

[samster747]

FS: Custom Propane Tank Mount for Gobi Ladder

I have a custom made propane tank mount for a Gobi ladder. The mount is for a Power Tank BKT-2285 Propane Power Bracket for 8" diamater Propane bottle. All hardware is included. The setup was used only once and I decided just to go a different route with my camp propane setup. Pictures show with the power tank bracket installed and power tank bracket removed. To clarify, no power tank bracket is included. Just the mount that attaches to the Gobi ladder. The power tank bracket holds a 5lb propane tank.

I'm local to the Seattle area. I will ship at buyers expense. Asking $30.

 

[Bigbriman]

would the crossbars fit a 2019 and if so, would you consider selling just the crossbar?

Roger

I think they're all the same. $25 gets you any part of the roof rack you want.

 

[Bigbriman]

Sold my 2011 Limited, got some parts left over. Priced to get out of my garage, make me a reasonable offer:

-OEM all-weather floormats ($35 plus shipping)
-OEM all-weather cargo mat ($20 plus shipping)
-OEM roof rack with crossbars plastidipped black ($25 plus shipping)
-**SOLD** OEM shift knob ($5 plus shipping)**SOLD**
-OEM suspension, shocks and springs ($10 plus shipping)

-40" Extreme LED lightbar ($75 plus shipping)

Bump

 

[Bpfish]

Bullet Proof Fabricating Storage Panel-Passenger Side

Hi all, I have a set of BPF storage panels on order but only wanted the driver side. These are my favorite panel but are only sold in pairs. I ordered the pair but will be selling the passenger side.

Please send me a message if you’re interested in the passenger side storage panel. $185

I have not received them yet, but should soon. Below is the stock photo from BPF.

I’m happy to ship but buyer pays shipping. Local pick up in the Austin, TX area.

 

[DannyLlama]

Very cool. I think you accidentally posted in the for sale thread.

Thanks... removed

 

[[email protected]]

(5) TRD Off Road Rims(black inlay) $600 - SoCal

I have 5 TRD Off Road (2018) Rims (has the black inlay) for sale. Rims are in excellent condition. I am located in Central/Southern California. Not interested in shipping at the time. Would be willing to split the set to 4 and 1. $500 OBO. No TIRES, but has valve stems. Please PM if interested.

I travel a lot. SOCAL, NORCAL and LAS VEGAS.. willing to bring rims along if you are in those areas

 

[buffalojay]

FS: 2015 4Runner SR5 w/extras $32,500

Here's the link to my 4Runner I am selling guys. Let me know if you're interested. Just send me a message through t4r or craigslist. Thanks!

2015 4Runner SR5 45,000 mi - cars & trucks - by owner - vehicle automotive sale

 

[CF_Machete]

serial confirmed as E4-FD1-Y005B29. The box is 22lbs and is 21X13X8, shipping from 08869. Local pick up preferred or buyer pays shipping.

Confirmed to work well on the pre 2019 pro shocks providing a 2" lift per the link below.

TRD Pro with 6112 coils (pics inside)

$100 after the smoke clears.

Still up for sale. If you're local and need help mounting the coils on your stock pro shocks or what ever other shock you plan to use them with, I can assist with tools.

 

[Truck Norris]

Bump

sent you a PM

 

[Jesse1983]

Ready for your Adventure!

good luck with the sale! I would suggest you consider removing some parts and selling them locally :eyebrows: