5th Gen For Sale/Wanted Thread

[Reynolds]

Prinsu 5th gen full rack non-Drill and GOAT matte black armor for sale

Hey guys I’m new to this forum.

I am selling my 5th gen 4R in the northern Virginia

I am selling the GOAT magnetic armor. It is in matte black and I have had it for two months. I am asking $300 for it.

If I can figure out how to post pictures, I will.

Eric (571-245-1355) shoot me a text if interested.

 

[Gingahrunnah]

FS: 2019 ORP Black Factory Rails

I just installed the Victory Full Roof Rack and it required removal of the Factory Rack off my 2019 TRD ORP. No crossbars included. Local pickup preferred (Stamford, CT). Willing to ship at buyers expense.

Rails are flawless as my car only had 8k miles on it at time of removal and I haven’t put anything on the roof (including crossbars).

PICKUP: Stamford, CT
PRICE: $200 obo (will ship at buyers expense)

Listed on eBay. Removing from here.

 

[Redragn53]

Selling my 2014 White 5th Gen Front Bumper, still has fog light housing, comes with bumper support, metal piece behind the bumper in good shape no cracks, located in NORCAL, asking $200 for everything

Very interested...will you ship to 30041 Cumming, GA...willing to pay.

Thanks!

 

[Jemplyr77]

Cup Holder Insert

WTB front driver cup holder rubber insert. PM me if you have one you don’t use. FOUND

 

[2barevo]

Hey guys I’m new to this forum.



I am selling my 5th gen 4R in the northern Virginia area and I have a full length non-drill Prinsu rack for sale. I have owned if for about 8 months and it is in great condition. I am asking $700 for it, thanks.



I also am selling the GOAT magnetic armor. It is in matte black and I have had it for two months. I am asking $300 for it.



If I can figure out how to post pictures, I will.



Eric

Pm sent

Sent from my ONEPLUS A6013 using Tapatalk

 

[2barevo]

Hey guys I’m new to this forum.



I am selling my 5th gen 4R in the northern Virginia area and I have a full length non-drill Prinsu rack for sale. I have owned if for about 8 months and it is in great condition. I am asking $700 for it, thanks.



I also am selling the GOAT magnetic armor. It is in matte black and I have had it for two months. I am asking $300 for it.



If I can figure out how to post pictures, I will.



Eric

Can't pm you. I guess your profile is too new. Can you send me a message on Instagram [MENTION=173521]2barevo[/MENTION]

Sent from my ONEPLUS A6013 using Tapatalk

 

[Doc_Fry]

We are thinking of selling our 2015 TRD Pro and upgrading to a new truck that better fits our needs for Overlanding Travel. That said I wanted to gauge interest in the following items.

——-
Gobi Roof Rack and Ladder

——-
Icon Suspensions:
Billet Front Control Arms
Billet Rear Trailing Arms

——
Custom Busman Fuse Accessory Block self healing fuses

6 Switch Center Panel using Carling Switches
Currently have setup for
- Front Roof Rack Light
- Side Roof Rack Light
- Rear Roof Rack Light
- Grill LED alight Bar
- Rock Lights
- Winch

All wiring and harness to lights included. All have Deutsch connectors. Harness goes from
Engine bay to roof rack. One front, 2 on each side of rack, and 2 on rear of rack. Could possibly sell the rack with all
Light bars included. Running rigid all the way around except front race runner light bar. All seen on build profile.

Also has a side of steering wheel 2 switches currently using for a fridge to the rear of the truck and a switch for my battery isolator. Willing to give switches to buyer. Would require center console piece that currently houses the switches in trade. If you want extra switches need the dash blanks as well. All was professionally built and keeps all circuits separate from the factory wiring. Some circuits set to only work with ignition, can be setup to have lights turn on and off with high beams as well. See my build profile for pics and more information.

$350 for the complete setup minus lights. Includes fuse block, all self healing/resetting fuses, included all wiring harnesses, all switches with 6 cat king type in center console piece, 2 side of steering wheel switches. Can be shipped.
If interested in lights let’s talk. Could even do some sort of setup with the roof rack and all fittings to get a complete turn key system.

$350
For the complete system. Others that do similar run easily north of $500 for spod types without extra wiring, connector, self resetting fuses etc.
——-

All still on the truck. None of it abused. The truck has around 60k on it right now. I was thinking of returning it to stock and using funds to buy accessories for our next build. Let me know if your interested. I am about 2 Hours North of Atlanta and 2 Hours East from Chattanooga. -Doc

 

[Krayziekid]

I just installed the Victory Full Roof Rack and it required removal of the Factory Rack off my 2019 TRD ORP. No crossbars included. Local pickup preferred (Stamford, CT). Willing to ship at buyers expense.

Rails are flawless as my car only had 8k miles on it at time of removal and I haven’t put anything on the roof (including crossbars).

PICKUP: Stamford, CT
PRICE: $200 obo (will ship at buyers expense)

Ayyyyy another Stamford 5th gen!

 

[KYMike]

***SOLD*** Dobinson C59-505 rear springs (used)

I have a set of Dobinson C59-505, black, rear springs.

These worked great on my 2017 ORP, but recent reduction in vehicle weight left me with too much lift in the rear. I replaced with shorter springs.

$100 + shipping.

 

[DeltaWhiskey]

wtb RAGO interior window panels

pm if you are looking to get rid of some

 

[uh0h50]

FS: LFD Off Road 3/4 Rack

Looking to sell my lightly used LFD Off Road 3/4 roof rack. Some extras included. Pick up in East Bay, Northern CA Bay Area.

 

[uh0h50]

For those looking to go forward with a DIY headlight retrofit (that will blow the XB LED headlights out of the water and retain the OEM look), I have my brand new Profile Performance bi-LED projector kit with 2014+ 4runner specific retroquick brackets for sale! Retail is $280 for the projectors, $30 for the brackets and $20 for the retro rubber sealant. Comes with random retrofit parts. Make offer please!

bump! make offer.

 

[hwnrunner]

I have a set of Dobinson C59-505, black, rear springs.

These worked great on my 2017 ORP, but recent reduction in vehicle weight left me with too much lift in the rear. I replaced with shorter springs.

$100 + shipping.

about how much lift did you achieve with these without the weight?
+2, 2.25, 2.5?

 

[KYMike]

about how much lift did you achieve with these without the weight?
+2, 2.25, 2.5?

I was getting +2"

 

[Verast]

Hey guys I’m new to this forum.

I am selling my 5th gen 4R in the northern Virginia area and I have a full length non-drill Prinsu rack for sale. I have owned if for about 8 months and it is in great condition. I am asking $700 for it, thanks.

I also am selling the GOAT magnetic armor. It is in matte black and I have had it for two months. I am asking $300 for it.

If I can figure out how to post pictures, I will.

Eric

I wish You would have posted this 2 days ago before I bought my prinsu rack

 

[Reynolds]

Return it! Haha

 

[fr4c]

Interested in Toyota Predator Steps if anyone in the Tri-State/NJ area is looking to sell theirs.

 

[Anand]

I've got my previous set of Dobinsons springs available... Fronts have approximately 23k miles, rear's have approximately 25k miles on them.


C59-300 Front Springs - "Stock front end load, 1.75" lift. 385mm height, 586LB"

C59-327 Rear Springs - "200-400LB heavy rear load weight, 2" lift. 410mm height, 271LB"

$100/pair

I'd much prefer local pick up, I'm just south of Baltimore, MD (21060); shipping could be arranged at buyer's expense

 

[Bing305]

Can you email me or DM me photos of the armor? [email protected] or instagram [MENTION=94073]knight[/MENTION]__Runner

 

[teknoholic79]

pm if you are looking to get rid of some

I'm thinking of selling my Rago Fab complete molle panel with the shelf (powdercoated). I'm in Los Angeles and willing to ship at buyer's expense. Pretty new and only had it for 3 months.