5th Gen For Sale/Wanted Thread

[Alext4r]

5th Gen running boards - $200 OBO

I have a set of running boards that came off my 2020 ORP. Mounted for less than 1k miles.
Looking for $200 but willing to take offers.
Picked up in SoCal.

 

[2barevo]

Edit: One headlight set remains, the cleanest/nicest one, and will come with all the HID's or low/hi beams and ballasts and also the LED set (that does need a replacement bulb) for low beams too. $250 shipped to western USA.

Tail lights are pending but haven't seen $ yet.

Thanks!

Pm sent

Sent from my ONEPLUS A6013 using Tapatalk

 

[LIT4R]

FS: OEM Fogs and Chinese Replica TRD Pro Grille for shipping; N-Fab Rack Local only

Selling a set of OEM Fogs, shipped anywhere in the lower 48 for $60

Also selling the Chinese Replica TRD Pro Grille that we all know from cartrim shipped anywhere for $60.

Both are in excellent shape. Selling the fogs because I put in LEDs. Selling the Pro Grille because I want to go in a different direction.

Also selling a fully put together N-Fab Roof Rack for $500. It's in like new shape, everything's been hit with loctite. Like above, going in a new direction. Not willing to ship so it would have to be an in person deal in New York (Guess we could place the rack in the middle of us in the parking lot and the money in the middle of the parking lot, to keep our 6 feet?).

 

[sleepsontoilet]

Also selling the Chinese Replica TRD Pro Grille that we all know from cartrim shipped anywhere for $60.

PM sent

 

[K9overlanding]

Yikes:wave:

Funning how it happened... I was running Fins & Things in Moab... took the wrong line and took a nose into the ground. Was really surprised the air bags did not deploy and or the rig didn't flip over. Received a nice little lecture from the boss... something to do with "Remember Stupid... we still need to drive home!"

 

[K9overlanding]

Yep, the new welds were not done well and they cooked all the paint surrounding the welds to perfect toasted marshmallow brown. At least hey weren't trying to hide the bad repair!:flamethrwoer2:

Would you happen to know a Good Aluminum Welder in the greater Phoenix area?

 

[Akkording]

I made a big mistake recently... sold my Gobi ladder, went with the C4, didn't necessarily like the C4, sold that, and now want to go back to a Gobi. Willing to buy in any condition! Living in the SF Bay Area but moving to Philadelphia in a few weeks, so whatever is easier.

Shame Shame Gibz have you considered a Baja Rack ladder? text me bro, I might sell you mine to go Baja!

 

[gibburnz]

I know man, I know. I’m keen on the GOBI though because I know for a fact the C4 dual swing will work with it. The Baja makes more sense because it folds out of the way, but I just like the simplicity of the Gobi. Thanks though!

 

[honda250xtitan]

Would you happen to know a Good Aluminum Welder in the greater Phoenix area?

look up lost_industries on IG.

 

[LIT4R]

Selling a set of OEM Fogs, shipped anywhere in the lower 48 for $60

Also selling the Chinese Replica TRD Pro Grille that we all know from cartrim shipped anywhere for SOLD.

Both are in excellent shape. Selling the fogs because I put in LEDs. Selling the Pro Grille because I want to go in a different direction.

Also selling a fully put together N-Fab Roof Rack for $500. It's in like new shape, everything's been hit with loctite. Like above, going in a new direction. Not willing to ship so it would have to be an in person deal in New York (Guess we could place the rack in the middle of us in the parking lot and the money in the middle of the parking lot, to keep our 6 feet?).

Grille SOLD! Rest still available.

 

[askdrtodd]

OK tails sold, down to one set of headlights ($250+ship) with all the bulb goodies:

- Both L+R headlights in like-new condition
- (1) Set of HID's for high beams (bulbs & ballasts), in great condition, less than an hour of use
- (1) Set of HID's for low beams (bulbs & ballasts), two new sets of bulbs (6k and 5k color temp), and a third unused set of bulbs (5500k) that come with the rubber plug to puncture the back of the headlight dust cap. Basically a pair of ballasts and three pair of bulbs to play with or choose from.
- (1) Set of LED's & ballasts for low beams, but one of the LED bulbs doesn't get bright. I tested both ballasts with the other bulb, so you've basically got one bum bulb to replace.
- Switchback turn signals- bright white to match the HID while being used as running lights, and then Amber when flashing as turn signals.

 

[rydr1]

Couple things for sale..

OEM chrome tip used for a month - $20 + ship
Weather tech All Weather mats, not tray style. Used 2 months, no wear - $50 + ship

PM sent on floor mats.

 

[SaguarGo]

Looking to trade a Prinsu 7/8th Gen 5 roof rack for a TRD Pro Roof Rack.

Located SLC, UT

Looking to sell the Prinsu? Pics? Does it have the black hardware as well? How long have you had it and for how much?

 

[Timc03]

4Runner Toyota OEM Predator step bars.
Used GOOD / CLEAN condition, NO scratches, NO dents or bent footsteps. $350
Tampa, FL, 33647
Local pickup.
Please email me direct for fastest response: [email protected]

Toyota 4Runner Predator Tube Steps. Exterior, Access - PT92589180 - Genuine Toyota Accessory

Dang. I am in CO. I would snag these up in a heart beat. Sweet deal

 

[michaelgoggins]

YES,

WE need a 5th gen thread

Mud guard ? - Page 7 - Toyota 4Runner Forum - Largest 4Runner Forum

.

I agree

 

[Scowling Tuna]

WTT

(Central PA, near York)

I have the Schrockworks sliders, three tubes, in the crinkle finish (from them), and I regret not getting the flat plated step style. Is anyone willing to trade (any flat-plated step slider) for the what I have? I'll add pictures later (or send them on request).

 

[DallasTRDPro]

These are still for sale $600. Only been stepped on.

 

[Redsoxx1918]

RUNNING BOARDS...anodized detail.

I have some runnings boards that came off of my 4runner. These are Toyota OEM parts. They work really well, I just replaced them with RSG sliders. Best price, new, I found online was $400. Offering them up for $150. Beautiful condition, no marks or damage. Local pickup or delivery in RI. I could ship them but the price to ship would probably be prohibitive.

Sent from my iPhone using Tapatalk

 

[Groove1797]

Bump and some pics

<a href="http://s39.photobucket.com/user/Groove1797/media/IMG_0400.jpeg.html" target="_blank"><img src="https://i39.photobucket.com/albums/e200/Groove1797/IMG_0400.jpeg" border="0" alt=" photo IMG_0400.jpeg"/></a>

Bump on these. I've had a few transactions fall thru. Still looking for 250.

In Denver.

Thanks,
Tyler

 

[DC 4Runner]

Stock 4R '17 TRD PRO Bilstein Suspension Front/Rear - $600.00 OBO

Are these still for sale?

I will be pulling off the Bilstein TRD PRO suspension in the upcoming Christmas holiday week. If anyone is interested it currently has the FJPro 14" spring installed but I can make change it to anyone's needs prior to selling off and will come fully assembled for ease of your installation. What I currently have listed below (stock photos to be updated shortly after cleanup and removal), all items are used but in great shape:

• Stock 4R '17 TRD PRO Bilstein Suspension Front/Rear - $600.00 OBO
  Front Coilover with 13"x3" spring w/top hat, reservoir rear shocks and springs. 15K miles
  The TRD PRO front kit is very similar to the Toytec 6112 kit that sells for 750$, minus being adjustable Bilstein 6112 Series Front Shock Kit for 2010+4R and the rear reservoir shocks are pretty much the 5160 Bilstein shocks which sell for 410$ 25-227611-P Bilstein 5160 Series Remote Reservoir Rear Shocks
  
  
  
  
• Toytec BAJA1 1" perch and TOP1-T Front Top Plate Spacer for 2" Front Lift for 4R TRD Pro - $150.00 OBO - 5K miles
  
  
  
  
  
  
  
  
  
  
• Toyota FJPro 14"x3"x600lbs Red Spring - $150.00 OBO - 10K miles