5th Gen For Sale/Wanted Thread
- Thread starter skel
- Start date
FS: LFD Off-road rock sliders
.120 Wall LFD rock sliders flat angle with rear bump-out. Asked for sectioned plate only at front door and rear with some nonskid I put on at front. Bolts straight up with full length mounting plates vs only at supports as some others are made. I don't have KDSS and website asks if you have it so guessing won't work with KDSS.
Purchased August 2020 @ $$889.00 (Now about $1200).
Never offroad so no dings, scratches, damage. No shipping.
I'm in Winston-Salem, NC.
$800.00
.120 Wall LFD rock sliders flat angle with rear bump-out. Asked for sectioned plate only at front door and rear with some nonskid I put on at front. Bolts straight up with full length mounting plates vs only at supports as some others are made. I don't have KDSS and website asks if you have it so guessing won't work with KDSS.
Purchased August 2020 @ $$889.00 (Now about $1200).
Never offroad so no dings, scratches, damage. No shipping.
I'm in Winston-Salem, NC.
$800.00
Attachments
FS: Escape Gear seat covers
Polycotton charcoal (per website but more brown) front seat and center arm rest. No issues with feeling heat from seats. Good snug fit, little trial and error getting the seat bottom on with straps and wiring if you have powered seats.
Great condition, clean.
$350 shipped
$325 if picked up. In Winston-Salem, NC
Polycotton charcoal (per website but more brown) front seat and center arm rest. No issues with feeling heat from seats. Good snug fit, little trial and error getting the seat bottom on with straps and wiring if you have powered seats.
Great condition, clean.
$350 shipped
$325 if picked up. In Winston-Salem, NC
Attachments
Last edited:
wsu_runner
New member
Nearly new TRD Pro exhaust
Selling the TRD Pro exhaust from my 2022 with ~1700 miles. Includes the muffler section, the tailpipe section, and the three bolts to connect the two. Local pickup in the San Diego area.
Looking to get $300. On a separate listing (here) I'm also selling the Pro roof rack for $400. If interested, I'll do a package deal for both for $600.
Selling the TRD Pro exhaust from my 2022 with ~1700 miles. Includes the muffler section, the tailpipe section, and the three bolts to connect the two. Local pickup in the San Diego area.
Looking to get $300. On a separate listing (here) I'm also selling the Pro roof rack for $400. If interested, I'll do a package deal for both for $600.
Attachments
jaredhouck
New member
anyone have a non-limited bumper sitting around?
Bought a pre-runner hybrid bumper from Lil B's (which I love) and unfortunately I didn't catch that my Limited bumper sticks out right where the tear drop / bumper sidebar is. Made some ugly plastic bumper cuts getting it to fit and am not happy with my work.
Anyone have a 2014 up non-limited bumper with the teardrops sitting around? Don't care what color. I'm gonna paint it. Close to Charleston, SC would be awesome.
Bought a pre-runner hybrid bumper from Lil B's (which I love) and unfortunately I didn't catch that my Limited bumper sticks out right where the tear drop / bumper sidebar is. Made some ugly plastic bumper cuts getting it to fit and am not happy with my work.
Anyone have a 2014 up non-limited bumper with the teardrops sitting around? Don't care what color. I'm gonna paint it. Close to Charleston, SC would be awesome.
Ry'sRunner
New member
should probably up the price and post it in PSA forum about the rear window CO2. :bump:
FS: LFD offroad aluminum front skid
No offroad time, simple install and has a cover for filter access.
Front Skid Plate - 5th Gen 4Runner – LFD Off Road
$280 pick up/meet up only. (I'm in Winston Salem, NC)
No offroad time, simple install and has a cover for filter access.
Front Skid Plate - 5th Gen 4Runner – LFD Off Road
$280 pick up/meet up only. (I'm in Winston Salem, NC)
Bump still available. Open to offers.
For sale: Pioneer Platform (84" X 49") with Rhino-rack backbone for 5th Gen 4Runner. 2 slats have 2 holes from when I had an RTT mounted on it. Still in great shape. Will also come with miscellaneous accessories. $900 picked up in Temecula,CA 92596
Sent from my Pixel 6 Pro using Tapatalk
steveh_2007
New member
FS: 5th Gen Morimoto XB LED Right (Passenger) Headlight
Hi Guys,
I recently replaced my Morimoto XB LED headlights on my wife’s 5th Gen after a minor accident, so I have the right passenger assembly sitting in my garage taking up space…
I’m not sure if TRS takes these as donation headlights as they sale used quality XB’s on their website.
Asking $100 OBO
Hi Guys,
I recently replaced my Morimoto XB LED headlights on my wife’s 5th Gen after a minor accident, so I have the right passenger assembly sitting in my garage taking up space…
I’m not sure if TRS takes these as donation headlights as they sale used quality XB’s on their website.
Asking $100 OBO
Attachments
Last edited:
918desertjester
New member
Yes, the entire kit with the tray, carpet, hardware. Everything was stripped out for new cargo boxes.
dwib44
Member
5th Gen 4Runner AlphaRex Nova Headlights - $800 ABQ NM
Pair of AlphaRex Nova Headlights in Alpha Black for the 5th gen 4runner. In excellent condition. Asking $800. Can ship at additional shipping cost. Located in ABQ NM.
Pair of AlphaRex Nova Headlights in Alpha Black for the 5th gen 4runner. In excellent condition. Asking $800. Can ship at additional shipping cost. Located in ABQ NM.
Attachments
Last edited:
dwib44
Member
Set of RRW RR5 Wheels in Rare Gloss Black Color $950 ABQ NM
RRW RR5 wheels in short production run of Gloss Black. These were only made for one short batch and are no longer produced. I have a set of 5 wheels in excellent condition. Specs are:
17X8.5 (6X5.5 | 6X139.7)
-12 Offset
NOTE: Wheels only, tires in picture do not come with, pictured for showing how these look with tires mounted
These fit most Toyota 4x4s including 4Runner, Tacoma, and FJ Cruiser.
Asking $950 OBO for the set of 5.
These would be a little rough to ship... so looking to sell local.
Located in ABQ NM
RRW RR5 wheels in short production run of Gloss Black. These were only made for one short batch and are no longer produced. I have a set of 5 wheels in excellent condition. Specs are:
17X8.5 (6X5.5 | 6X139.7)
-12 Offset
NOTE: Wheels only, tires in picture do not come with, pictured for showing how these look with tires mounted
These fit most Toyota 4x4s including 4Runner, Tacoma, and FJ Cruiser.
Asking $950 OBO for the set of 5.
These would be a little rough to ship... so looking to sell local.
Located in ABQ NM
Attachments
Last edited:
PJSnow
Member
Where are you located. I have a set of Spidertrax spacers but I don't think its worth shipping
PM sent.
JeuTheIdit
New member
WTB 2010-2013 trail roof rack. Local to Minnesota Twin Cities but willing to pay for shipping.
U
USStrongman
Guest
Pretty sure there are two on FleaBay.
JDMrunner
New member
FS Ironman KDSS Adjustable Rear Panhard Bar Kit (4R, GX 470/460) - $483.60
Brand New Ironman 4x4.
$300 + 4% (paypal fee) = $312.00 Shipped. Paypal only.
KDSS Compatible Adjustable Rear Panhard Bar Kit - Suits Lexus GX470/GX460 and 2010+ Toyota 4Runner
Finally, there’s a solution for the KDSS crowd who want to lift their trucks but can't because the KDSS sway bar system won't let your new suspension droop without the stock panhard bar swinging / smashing into the driver’s side KDSS downlink clamp.
This amazing kit was engineered to correct your rear axle shift after lifting your suspension. Our panhard bar is "double adjustable" meaning you or your alignment tech can now make precise and simple adjustment without removing or disconnecting the panhard bar allowing for an exact rear axle alignment.
Competitors only offer single adjustable panhard bars that have to be removed from the vehicle to be adjusted resulting in expensive install and removal labor fees, not to mention you can only shorten or lengthen those panhard bars 180 degrees at a time.
Our panhard bar uses OEM Style rubber bushings for maximum flex and durability.
KDSS Compatible Rear Panhard Bar - Suits Lexus GX470/GX460/2010+ Toyota 4Runner
Brand New Ironman 4x4.
$300 + 4% (paypal fee) = $312.00 Shipped. Paypal only.
KDSS Compatible Adjustable Rear Panhard Bar Kit - Suits Lexus GX470/GX460 and 2010+ Toyota 4Runner
Finally, there’s a solution for the KDSS crowd who want to lift their trucks but can't because the KDSS sway bar system won't let your new suspension droop without the stock panhard bar swinging / smashing into the driver’s side KDSS downlink clamp.
This amazing kit was engineered to correct your rear axle shift after lifting your suspension. Our panhard bar is "double adjustable" meaning you or your alignment tech can now make precise and simple adjustment without removing or disconnecting the panhard bar allowing for an exact rear axle alignment.
Competitors only offer single adjustable panhard bars that have to be removed from the vehicle to be adjusted resulting in expensive install and removal labor fees, not to mention you can only shorten or lengthen those panhard bars 180 degrees at a time.
Our panhard bar uses OEM Style rubber bushings for maximum flex and durability.
KDSS Compatible Rear Panhard Bar - Suits Lexus GX470/GX460/2010+ Toyota 4Runner
Attachments
Last edited:
Doubt it. The trail rack is unique.
