5th Gen For Sale/Wanted Thread

[Offroad Architect]

Wanted: 5th gen steering wheel in good condition

I bought a used 2015 TRD Pro a couple of years ago. The owner before me had installed a Lexus steering wheel. I'm assuming the previous owner was attempting to wire up the paddle shifters that are integrated into the Lexus steering wheel to the 4Runner sequential mode hand shifter system. I have tried researching this mod with no success. None of the controls work since they are not connected. I have a clue on how to program the MAESTRO compatible head unit installed in my 4Runner to make the Lexus steering wheel work, however, I really just want to put a stock steering wheel back on it at this point.

I am willing to purchase a wheel from someone or trade the Lexus wheel for a stock wheel if anyone is interested in tackling the mod. The Lexus wheel I have is in great condition.

 

[Smallston]

Bump! $80 SHIPPED.

I’m moving in a week and would rather give these away than throw them out.

I'll take them PM me

 

[2016 4Runner SR5]

Bump! $80 SHIPPED.

I’m moving in a week and would rather give these away than throw them out.

Sent you a PM a couple days ago. Still available?

 

[Chevrolegs]

Looking to sell rear springs from my eibach pro truck lift. 1” lift. They’ve been sitting in my garage since I replaced them with the load leveling kit. About 5,000 miles.

$100 obo located in Orange County, ca. no shipping.

 

[SoGaFarmRunner]

Borla 140379 GA

Borla 140379 catback for sale. Less than 5k miles with it.
$475, will consider swap + cash. Shipping extra and would be $$$.
Located in south central ga but travel to Atl and FL panhandle with regularity.
Can email pics/video.

 

[fistfulofgravy]

Cleaning out the garage before a move. All from a 2016 Trail model. Pickup only in San Jose, CA 95126 by end of day this Wednesday, 8/24. Can take cash, Paypal, Google Pay, Venmo. Having trouble with posting images but they are here 4Runner parts - Google Photos

FREE - Upper grill with the big cowboy hat emblem.

FREE - Stock roof rack. Silver rails, black end caps and cross bars. A few scuffs. NO mounting hardware.

$100 - Silver Trail bumper valences. Some knicks and scratches.

$50/each, $175/4 - 2016 Trail wheels (these are all silver). Very clean overall but a couple of scuffs. 37k miles before they were taken off. Will sell individual wheels or the whole set.

DM or reply here if you're interested.

 

[uh0h50]

3rd Row + All Necessary Components

Looking to sell my 3rd row seating and all associated components.

Pulled from my 2016 SR5 Premium non JBL. The seats are black in leather (softex?) and only sat in twice during my ownership. These were pulled about 2 years ago and have been in storage since. They are mint.

Included are the belts, bolts and even the interior panels (P/N 6474035120C0 and 6473035170C0). Some scratches on the panels are to be expected as Toyota interior plastics are SOFT. This is likely the most complete third row listing you will come across. $800 picked up in Northern CA. Buyer assumes all responsibility in installing in another 4Runner.

 

[Humble Leader]

any ontario canada people looking for a slee compressor mount. I have an unused one. I don't like the way it fits so am looking to sell. PM me for details and we can work something out

 

[Stebrock]

[SOLD] I have a set of stock Bridgestone Duelers which are essentially new (less than 300 miles). Pick up on Long Island, NY. $400 for the set.

 

[MasterFoo]

Bump - still available. Want to experiment with paint/wrap/plastidip/bedliner and keep your stock valances intact?

Do you still have these?

 

[CRasch505]

$350 obo. These are the OE factory sliders. Weighing in at 77 lbs for the pair, they are much beefier than you’d actually think for a factory part. Been on my 4Runner for a year, but no dents or scratches. Powder coat is still intact and looks good. I’ll even include some Genuine Sierra Nevada mountain dirt on them (mostly because I don’t really want to clean them).

Tucked up pretty good, so really not usable as a step, but they’d stop some sill damage.

Fits KDSS and non, includes the OE hardware. Toyota says 2015+ for year fitment. Super easy install, you can do it in your driveway with a 12mm socket in less than 1/2 hour.

Local pick up in Chico CA but I’m in Auburn some weekends and can meet at Bass Pro.

I have a box and can ship, but they are 89lbs (boxed up)and the box is 68” x 18” x 7”, so UPS could get up there in price depending on where you are….

Great price on these. Wish you were closer!

 

[sato_toguchi]

Selling my 4Runner TRD Pro Bilstein Suspension kit. These just came off of my 2015 4Runner and have approx. 44K miles on them. They could use a good cleaning, but have quite a bit of life left in them, and are priced accordingly. Moving and need these gone.

$300, local Lynnwood/Seattle-area pickup only please. Thanks!

 

[DallasTRDPro]

Selling my Diode Dynamics SSC2 Pro ditch lights. I just never get much of a chance to use them. $300 shipped. Locate in Dallas, TX.

 

[matoolie]

Dobinson Front Suspension and Rear Shocks

SOLD

Selling the following Dobinson suspension components. Have ~20k miles on them. Nothing wrong with any of the items. I just decided to go with a different setup after removing weight from my truck.

$500 for all. I will ship at buyer's expense, but the box I'm sure would be considered "heavy item" and cost accordingly.

Front:
C59-302 springs =100-220LBS heavy load front weight, 2" lift. 395/395mm, 17mm wire, 586LB.

GS59-574 shocks = Twin Tube, fixed mount (not adjustable), extended travel (22.63" / 575mm extended, 430mm compressed), use with 2" coil to get 3" lift (coil seat height is 13mm higher than OE, resulting in ~1" of lift)

Rear:
GS59-701 shocks = Twin Tube, suits 0-2.5" lift. 605mm extended, 362mm compressed.

Specs taken from this thread:
https://www.toyota-4runner.org/2580713-post1.html

 

[JDMrunner]

Brand New Ironman 4x4.

$300 + 4% (paypal fee) = $312.00 Shipped. Paypal only.

KDSS Compatible Adjustable Rear Panhard Bar Kit - Suits Lexus GX470/GX460 and 2010+ Toyota 4Runner

Finally, there’s a solution for the KDSS crowd who want to lift their trucks but can't because the KDSS sway bar system won't let your new suspension droop without the stock panhard bar swinging / smashing into the driver’s side KDSS downlink clamp.

This amazing kit was engineered to correct your rear axle shift after lifting your suspension. Our panhard bar is "double adjustable" meaning you or your alignment tech can now make precise and simple adjustment without removing or disconnecting the panhard bar allowing for an exact rear axle alignment.

Competitors only offer single adjustable panhard bars that have to be removed from the vehicle to be adjusted resulting in expensive install and removal labor fees, not to mention you can only shorten or lengthen those panhard bars 180 degrees at a time.

Our panhard bar uses OEM Style rubber bushings for maximum flex and durability.

KDSS Compatible Rear Panhard Bar - Suits Lexus GX470/GX460/2010+ Toyota 4Runner

bump

 

[SurfToy]

Do you still have these?

Sorry, they are gone.

 

[xtacles]

Selling my Eibach Pro Truck lift kit. Brand new in box, never even taken all the way out of the packaging. Just decided to hold off on a lift for a bit. Pre assembled fronts. 2.75" front lift (adjustable) and 1" rear. Part number:
E80-82-071-01-22

Local pick up near Portland, Oregon.

$750

 

[ThunderRunner]

FS: Stage 1 Icon Front Coilovers - Oroville, CA - $450

These shocks came off a 5th gen 4Runner after 50k miles. I pulled them off because one of them needed a rebuild. I was going to do the rebuild myself so I put Bilsteins on. I realized that it will be more work than I want to take on and I don't mind staying with the Bilsteins so I am selling these now. I lowered one of the shocks to try and began the rebuild but decided not to proceed further.

They ride great. Softer than the Bilsteins but I prefer the firmer ride that the Bilsteins provide. I never went off-roading as these were on the wife's 4Runner that was a daily on the pavement. Just remember that you will either have to send these in for a rebuild or do it yourself if you choose.

Located in Oroville, CA in NorCal and can deliver to Yuba City or Chico. Will box them up if you want to pay for shipping. I will also include the spanner wrench for adjustments.

I need $450 to cover the cost I spent on the Bilsteins and OME springs setup I currently have. Thanks.

PM if you are interested.

Let me know if you have any questions. Thanks.

 

[RSalha17]

Pedal Commander 4runner

Sold my 2019 4runner and have a pedal commander for sale, $200 and buyer pays shipping. DM me!

 

[Stevee]

5th gen, 4Runner, Steel, Shockworks, Front Winch Bumper..So Cal

For Sale

Shockworks, 5th gen, Front Winch Bumper

2010-2022 4Runner Front Bumper, 5th Generation

Excellent Condition

$1100

Local Pick Up at Simi Valley/North Los Angeles
No shipping, please

Thank you,
Steve