5th Gen For Sale/Wanted Thread

5th gen 4runner slee compressor mount (new)

new slee compressor mount. I even rounded out/polished the sharp edges on the side that's near the engine flex hoses. I was going to mount my compressor with this bracket but decided on a different mounting solution. shipping will be expensive to USA and probably not worth it, however Canada folks I am willing to pay UPS shipping depending on the sale price
 

Attachments

  • IMG-1631.jpg
    IMG-1631.jpg
    97.2 KB · Views: 1,394
Baja Squadron R Sport amber wide cornering + fog kit

Looking for a quick sale, moving across the country this weekend, forgot I had these. Will come with a brand new harness/switch, brackets for ditch lights, warranty card etc.

$250 ($260 w/pp fee) will ship for free within CONUS.



 
front grille upper/lower from 2012 trail edition

https://www.toyota-4runner.org/for-sale-t4r-items/307169-fs-5th-2012-gen-trail-edition-front-grille-upper-lower-$100-obo-philly-pa.html
 
FS: VA Diode Dynamics SS3s

$240 shipped or $225 local meet/pick up

Set of Diode Dynamic SS3 sport combo with amber backlighting. New wiring harness and light covers. Used about 1 hour and on truck about 6 months. Not using these on my 4Runner. Had been on my previous truck.
 

Attachments

  • D4DCDA70-F5D1-4ED5-8896-727BC951FED5.jpg
    D4DCDA70-F5D1-4ED5-8896-727BC951FED5.jpg
    124.3 KB · Views: 894
  • 0CF3BEF6-083E-49AA-A00F-89FE4D7CB2F3.jpg
    0CF3BEF6-083E-49AA-A00F-89FE4D7CB2F3.jpg
    86.9 KB · Views: 900
I purchased an Addicted Off Road bumper, got it to powder coated and then realized that one of the corners is bent and could not install it.

The vendor sent me a replacement but refused to cover the powder coating, so I had to pay powder coating twice.

I'm selling a defective bumper. If you are willing to cut and weld to make it fit.

It's a $1600 bumper, Selling for $600. Pics below, let me know if you have any questions.

Posting pictures of both corners for comparison..

p886345192-4.jpg


Bad corner

p1051215120-4.jpg


p675287081-4.jpg
 
Last edited:
Pair of headlights

I have a pair of headlights off my 2018 for sale. I can add pictures if needed, but we all know what they look like.

Headlights: $200

Prefer local sale 91706

Also, have 2018 Limited front and rear bumpers for sale. Can combine all parts for reasonable offers.
 
Last edited:
I purchased an Addicted Off Road bumper, got it to powder coated and then realized that one of the corners is bent and could not install it.

The vendor sent me a replacement but refused to cover the powder coating, so I had to pay powder coating twice.

I'm selling a defective bumper. If you are willing to cut and weld to make it fit.

It's a $1600 bumper, Selling for $600. Pics below, let me know if you have any questions.

Posting pictures of both corners for comparison..

p886345192-4.jpg


Bad corner

p1051215120-4.jpg


p675287081-4.jpg

Dangit...LOL. Always in Cali. Too far away, but GL with sale!
 
1.25” Spidertrax Wheel spacers

Selling 4 blue spidertrax wheel spacers. Two of them are plasti dipped on the sides, removed from other two to show condition underneath.

$180 shipped
 

Attachments

  • 174C0F1A-49EE-4A9A-AB70-1E3D6FD64394.jpg
    174C0F1A-49EE-4A9A-AB70-1E3D6FD64394.jpg
    135.1 KB · Views: 534
RAGO UNIVERSAL LED HIDDEN BUMPER BRACKET with MOUNTING PLATE. This a $235+ set up, but it definitely needs to be repainted. The price reflects that. Light bar and pods are not included. Only fits 2014+ 4Runners

$75 Local
$95 Shipped

4Runner | Behind the Grill Light | 5th Gen - Rago Fabrication

Mounting Plate for Universal Hidden Bumper Brackets | Rago Fabrication

Rago 1 by RedRunner_87, on Flickr
Rago 2 by RedRunner_87, on Flickr
Rago 4 by RedRunner_87, on Flickr
Rago 3 by RedRunner_87, on Flickr
Rago 5 by RedRunner_87, on Flickr
Rago 6 by RedRunner_87, on Flickr
Rago 7 by RedRunner_87, on Flickr
Rago 8 by RedRunner_87, on Flickr A
 
Last edited:
FS: TRD Pro Skid trimmed for KDSS, OEM LED Fogs, Pro Clip

(SOLD) TRD Pro Skid trimmed for KDSS (SOLD). This will work on any current gen 4runner. I had to remove it because it didn’t work well with my Warn Bumper. Includes the front two extended bolts and spacers needed to install the skid. Reuse your rear mount bolts. One of the push on lock washers was lost at some point, but it still bolts up just fine. SOLD

Pro Clip Mag Safe magnetic mount: You get what you see, use your own mag safe. I never had my phone fall off my Apple Mag Safe mount when this was in my truck. 60 shipped

Toyota OEM Black LED Fogs: Used for a year, great condition. 70 shipped
 

Attachments

  • 1F74B464-13F2-469B-928F-859F806B8FDA.jpeg
    1F74B464-13F2-469B-928F-859F806B8FDA.jpeg
    86.7 KB · Views: 1,160
  • 2204140B-A393-4E1F-8196-684C6D57A15D.jpeg
    2204140B-A393-4E1F-8196-684C6D57A15D.jpeg
    89.6 KB · Views: 1,147
  • DDF36278-108E-4DC2-A197-6704B340F858.jpeg
    DDF36278-108E-4DC2-A197-6704B340F858.jpeg
    106.5 KB · Views: 1,148
  • 325FD74B-399A-4F8B-8E85-B2AA3A5F7E47.jpeg
    325FD74B-399A-4F8B-8E85-B2AA3A5F7E47.jpeg
    101.3 KB · Views: 1,143
  • 4E4A49FF-8F98-41AB-80F1-48B8FC3D33BF.jpg
    4E4A49FF-8F98-41AB-80F1-48B8FC3D33BF.jpg
    77.7 KB · Views: 1,144
  • F00AE870-2350-482E-A62A-433BF7397F63.jpeg
    F00AE870-2350-482E-A62A-433BF7397F63.jpeg
    80.3 KB · Views: 1,161
  • EBAF0BA8-62C2-4179-8CCD-B03A1A6A5D6B.jpeg
    EBAF0BA8-62C2-4179-8CCD-B03A1A6A5D6B.jpeg
    66.5 KB · Views: 1,143
  • 8D84AEB3-3575-431F-9050-F4462AF8CE6E.jpeg
    8D84AEB3-3575-431F-9050-F4462AF8CE6E.jpeg
    60.1 KB · Views: 1,133
Last edited:
RAGO UNIVERSAL LED HIDDEN BUMPER BRACKET with MOUNTING PLATE. This a $235+ set up, but it definitely needs to be repainted. The price reflects that. Light bar and pods are not included. Only fits 2014+ 4Runners

$75 Local
$95 Shipped

4Runner | Behind the Grill Light | 5th Gen - Rago Fabrication

Mounting Plate for Universal Hidden Bumper Brackets | Rago Fabrication

Rago 1 by RedRunner_87, on Flickr
Rago 2 by RedRunner_87, on Flickr
Rago 4 by RedRunner_87, on Flickr
Rago 3 by RedRunner_87, on Flickr
Rago 5 by RedRunner_87, on Flickr
Rago 6 by RedRunner_87, on Flickr
Rago 7 by RedRunner_87, on Flickr
Rago 8 by RedRunner_87, on Flickr A

I'll take the bracket...sent you a PM.
 
TRD Pro Skid trimmed for KDSS. This will work on any current gen 4runner. I had to remove it because it didn’t work well with my Warn Bumper. Includes the front two extended bolts and spacers needed to install the skid. Reuse your rear mount bolts. One of the push on lock washers was lost at some point, but it still bolts up just fine. 210 shipped

Pro Clip Mag Safe magnetic mount: You get what you see, use your own mag safe. I never had my phone fall off my Apple Mag Safe mount when this was in my truck. 60 shipped

Toyota OEM Black LED Fogs: Used for a year, great condition. 70 shipped


PM'd on skid plate..
 
(4) '16 Trail wheels, center caps, TPMS sensors, and Bridgestone Blizzak DM-V2 tires (265/70R17) - $550

Both the tires and wheels are in good shape with no rash on the wheels. There are some light scratches from the tire changes on the wheels. These were used for a couple of seasons in Oregon but I have moved to Texas and no longer need these. Would prefer a local pickup (haha) , but am willing to ship from 78730 at buyer's expense.

Bump for Winter 2022!
 
FS - OEM 2014+ Headlights - Passenger Side - Chicagoland - $125

Hi folks, had one of my headlights smashed by flying plywood and decided to replace both at the same time.

So, up for sale is a 5-year-old headlamp assembly with working bulbs, fits passenger side only. Original 2017 Toyota part. Fits 5th gen 2014+ only.

$125 -- Prefer local pickup, will ship at buyer's expense. Replacement pricing from insurance was $256 (non-OEM) to $370 (OEM). Non-OEM eBay around $100 new. Salvage OEM over $300 in Chicago.
 

Attachments

  • HLfront.jpg
    HLfront.jpg
    137.2 KB · Views: 1,121
  • HLrear.jpg
    HLrear.jpg
    131.9 KB · Views: 1,114
Having trouble with pics right now - can send them via email/text until I can upload them

Selling my 2014 Toyota 4Runner

Some minor scuffs on bumpers, but nothing major.

Lots of upgrades:
Magnuson Supercharger

3” lift with 2.5” toytec Alumna coilovers and shocks and Dobinson rear springs and JBA UCA’s

SSO slimline bumper with Smittybuilt 9500lb synthetic winch

RCI aluminum front skid

Shrockworks steel gas tank skid

285/70r17 Falken Wildpeak AT3W (less than 10k on them) 285/70 ko2 spare

Pioneer avic 8500 with wireless Apple CarPlay/android auto

Upgraded pioneer speakers with amp

All lights upgraded with high quality LED (internal and external)

Remote start

New front brakes (calipers, pads, rotors)

Has a 3rd row - which is rare to find!

Overall a great truck, condition is above average for the age, and has been regularly maintained and fluids changed more often than called for by factory.

Mileage will go up as I drive it daily.
 
WTS: Alright friends message me and let me know if you’re interested and I can send pics. Everything’s in fairly new condition! All parts are from a 19 or 22 ORP.
Located in Piedmont area of NC

2 sets, front and rear silver valances - $100 a set

OEM headlights - $250
Tail lights - $200
Fogs - $100

All weather rear cargo mat (non-sliding deck) - $60

Brand new carpet floor mats - $40

Black chrome tip exhaust and muffler, rear exit - $100

4 Nitto Ridge Grapplers 265/70R17 WITH Matte Black TRD Wheels. 15k miles on them before taken off. - $850


Sent from my iPhone using Tapatalk
 
Last edited:

Members online

Forum statistics

Threads
278,316
Messages
3,554,106
Members
248,016
Latest member
Advally Service

Trending content

Back
Top