5th Gen For Sale/Wanted Thread

Correct, they are handed

47027:

4 WHEEL DRIVE. 4-Runner; Left. 4Runner; Left. 4WD. FJ Cruiser; Left. FJ Cruiser; Left; Auto Trans; Type A. FJ Cruiser; Left; Auto Trans; Type B. FJ Cruiser; Left; Manual Trans. GX460; Left. GX470; Left. Land Cruiser; Left. Land Cruiser; Right. LX470; Right. LX570; Left. Sequoia; Left. Tacoma; Left. Tacoma; Left; Type A. Tacoma; Left; Type B. Tundra, Sequoia; Left. Tundra; Left.

47026:

4Runner; Right. 4WD. FJ Cruiser; Right. FJ Cruiser; Right; Auto Trans; Type A. FJ Cruiser; Right; Manual Trans. GX460; Right. Land Cruiser; Right; From 11/15. LX570; Right; From 11/15. Sequoia; Right. Tacoma; Right. Tacoma; Right; Type A. Tundra; Right.
 
Rago Molle Panels and TRD skid plate for sale

I have a set of Rago Fab Molle panels for the rear windows and a TRD skid plate for sale. Had to move up tpo a bigger vehicle to pull a camper so time to clean the garage. These will fit any 5th Gen 4Runner. No scuffs or scrapes on skid plate and panels were on for about 8 mos. Very good condition on both. Asking $150 for skid plate with all hardware and $200 for Molle panels. Prefer local pickup but can ship at buyer expense. Located in Des Moines, Iowa.
https://www.toyota-4runner.org/clas...ated-toyota-4runner-no-commercial-ads-please/


UPDATE: TRD skid shield is now sold. Molle Panels are still available.
 

Attachments

  • Molle 1.jpg
    Molle 1.jpg
    50.5 KB · Views: 910
  • Skid 1.jpg
    Skid 1.jpg
    119.5 KB · Views: 921
Last edited:
PRICE DROP $600

Hey everyone

I have 5th gen cargo sliding tray from a 2013 Trail Edition. I installed L-Tracks on the tray, spaced about 25" apart. The sliding tray will also come with a vertical drawer system I built and integrated with the L tracks. I will also through in two (2) Step 22 Stingray Boxes, which fit perfectly in the top split drawer. The bottom drawer was used to store my Camp Chef Everest Stove. No issues with the setup, just upgraded to full drawer set up. Comes all components, brackets, and hardware needed for install. See photos and dimensions below:

Vertical Drawer
Outside Dimensions: 28.75"Lx22.25"Wx30.75"T
Split Top Drawer Dimensions: 13.5"Lx18.5"Wx9.75"T
Bottom Drawer Dimensions: 28.75"Lx14"Wx5"T

Asking $600picked up in San Diego (92129), but I do occasionally head up to LA/OC (90703) You are more than welcome to come check it out in person. Also, feel free to DM me with any questions or request additional photos

$600 OBO

Bump
 
WTB Yokohama G96B’s

Does anyone in the Northeast have a set of Yokohama 20” takeoffs from their new Limited they aren’t using?

Also open to a new set of 17” takeoffs with rims for a good price, which historically speaking seems to be a west coast thing LOL
 
WANTED: 2013 Trail stock front bumper

Looking to go back to stock from an ARB front bumper. I have a 2013 Trail in silver. I need all front bumper components. Hard find I know. Just looking around.
 
Does anyone in the Northeast have a set of Yokohama 20” takeoffs from their new Limited they aren’t using?

Also open to a new set of 17” takeoffs with rims for a good price, which historically speaking seems to be a west coast thing LOL

I have al set of four 20 inch rims with Falken wildpeaks snow rated, maybe 6k miles on the tires. And the factory 20 spare.

Might be interested in a sale, been thinking about 17 TRD pro and Yokohama tires.
 
FS: Alpine Halo9 iLX-F309 w/ 5th gen install gear and Maestro - $500 Pittsburgh, PA.

Reposting my Alpine Halo9, this time including an iDatalink Maestro interface unit and all Toyota wiring harnesses for your 4Runner in addition to all the installation gear that you will need.

Selling my lightly used Alpine Halo9 that I had installed in my 5th gen 4Runner. I'm selling it with modified stock metal HU mounts. I had this installed in the lower din and it did not cover the vents at all. The top was literally directly under the AC vents which was a big thing for me. Included are also a brand new stock wiring harness for a 5th gen non-JBL harness, a brand new radio adapter harness, and a brand new Scosche silver dash kit. Radio comes in original box, with all the installation manuals and paperwork.

Radio is great, and has wired Android Auto/Apple Carplay and an HDMI input.

80-pxl_20220615_235958487_e3fac64995942a09b207a9b231cf43f38942a915.jpg


Radio was reset to factory defaults before removed. The radio still has the stock screen protector from the factory.

80-img_20200703_184648_8ff2a968242b40cd179e60540e94b116b50d8196.jpg


Here's a picture of the dash kit

80-pxl_20230706_010841421_e1b4f1db229971a778d90bf450ee1020ee887e63.jpg


Stock radio brackets

80-pxl_20230706_010540424_bb92d03029ed5fed9ed8eb9598b2130cfba9a2ec.jpg


Here's a pic of the wiring included, minus the radio harness

80-pxl_20230706_010822167_fb8eb501a3fc4571960b2b7ec5c24fd001e17871.jpg


Including an iDatalink Maestro and all Toyota specific wiring harnesses, this with the wiring harnesses alone are around $250 new. You will just need to program for your vehicle.

80-pxl_20250323_170835620_6d6665cfd78bb6b62841b0175aa3a673e7bd26a2.jpg


Asking $500 for the radio, these are going for $700+ used on Amazon. Buyer would split shipping with me. If you need the radio harness soldered together I'd gladly do it for an additional fee. This is truly plug and play, all wiring and pieces you'll need to install in a 5th Gen 4Runner

Amazon.com
 
Last edited:
Pedal Commander

I'm selling my Pedal commander. $150 shipped.
 

Attachments

  • Pedal-Commander-PC64-Bluetooth-Throttle-Response-Controller_1faeb707-7137-4387-8c7c-a708f793eba.jpeg
    Pedal-Commander-PC64-Bluetooth-Throttle-Response-Controller_1faeb707-7137-4387-8c7c-a708f793eba.jpeg
    54.2 KB · Views: 960
2015 Limited factory head unit

$100 shipped

SOLD
 

Attachments

  • IMG_3743.jpg
    IMG_3743.jpg
    109.4 KB · Views: 891
  • IMG_3744.jpg
    IMG_3744.jpg
    109.5 KB · Views: 886
  • IMG_3745.jpg
    IMG_3745.jpg
    134.1 KB · Views: 901
Last edited:
FOR SALE: Prinsu Non-drill full length roof rack for 5th gen 4runner. Comes with all hardware. Some scuffs as pictured, otherwise in good condition. Only hauled a RTT for a short time.
$500
 

Attachments

  • Screenshot_20250403_141202_Gallery.jpg
    Screenshot_20250403_141202_Gallery.jpg
    146.7 KB · Views: 834
  • Screenshot_20250403_141157_Gallery.jpg
    Screenshot_20250403_141157_Gallery.jpg
    144.9 KB · Views: 834
  • Screenshot_20250403_141205_Gallery.jpg
    Screenshot_20250403_141205_Gallery.jpg
    150.7 KB · Views: 819
  • Screenshot_20250403_141210_Gallery.jpg
    Screenshot_20250403_141210_Gallery.jpg
    149.4 KB · Views: 835
Feeler - Halogen (pre-2021) Headlights?

Is there a market for pre-2021 Halogen headlights? I upgraded to LED so I have my stock ones, but can't seem to tell if there is a market for them.
 
Is there a market for pre-2021 Halogen headlights? I upgraded to LED so I have my stock ones, but can't seem to tell if there is a market for them.

very niche market typically for people looking to replace faded / foggy ones. Try local market place and go that route. I was able to sell mine for $300-400 range years ago to someone.
 
New ADV fiberglass fenders and Dirt King +3.5 axles for LT kits

Clearing out the garage, going to build a +2 kit and run stock fenders so these are for sale. All new unused un mounted etc..
Fenders $500
Axles $500
Carson City NV
May ship axles, no ship on fenders
 

Attachments

  • fenders.png
    fenders.png
    93.3 KB · Views: 666
  • axles.png
    axles.png
    108.1 KB · Views: 663
Last edited:
Console Organizer Set

$20 Shipped
 

Attachments

  • Console Set.jpg
    Console Set.jpg
    108.2 KB · Views: 480
  • Console Organizer 2.jpg
    Console Organizer 2.jpg
    121.2 KB · Views: 479
  • Dividers.jpg
    Dividers.jpg
    113.4 KB · Views: 504
Eezi-Awn full length rack, ladder and awning $900 OBO

I'm selling an Eezi-Awn brand k9 full length roof rack. It came off of my 2013 Trail edition but will fit any 5th gen. It's an amazing rack made in South Africa and is expedition grade. Fully welded aluminum, It's one piece! It's been extremely solid. No creaks or squeaks and no loose wiggling. They rate it at a 500lb capacity while moving and 1000lb capacity static.

Also included is an Eezi-Awn lite awning. It's the 2500mm size so it's huge! It mounts straight to the rack by way of the Eezi-Awn system.

I'm selling it with a Rhino rack folding ladder, a must to load and unload gear, and awning mounting brackets. Also included are 8 tie downs that slide into the rails to provide extra mounting options.

All hardware included and in place ready for install. This rack is the 49"W x 87"L size they sell and provides full roof coverage.

PRICE DROP

$900 OBO local pick up only, Tucson AZ. This things gotta go, its taking up so much space!
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top