5th Gen T4R Picture Gallery

Sliders in Portland Oregon

I think the owners name was Mark, they are all super nice and helpful, I went to their website, not very intuitive and doesn't seem to have everything on the site. I know that they had other sliders built for 4Runners. I copied their contact information below. Good luck

Metal Tech 4x4
2700 E 9th St
Ste 200
Newberg, OR 97132

[email protected]

1-800-839-0684

Hours of Operation:
Monday - Friday
8:30 - 5:30
 
I had a custom mount made for my Alpine "RUX-C800" DSP Remote Module. It slips in under the USB Access Door where the center console meets the dash. Check out the awesome detail that matches the "lip" in the door (door is still 100% accessible). Precision at its finest :) It is removable if needed. I dig it!

A shop in League City TX did the work - called "Car Tunes". They also sealed and deadened my doors (dead as a doornail!) and installed a pair of Morel Elate 9" Woofers, and are making custom dash-rings to squeeze a pair of Morel 4" point-source speakers in the factory locations (still a work in progress). I highly recommend them if you are in the area...

Here are some pics of the RUX in the dash:

IMG_0739_zpsc1820516.jpg~original


IMG_0747_zps16b2b770.jpg~original


IMG_0750_zps059a9f23.jpg~original


This truck's mods are coming along nicely IMNSHO :)

Enjoy :cool:
 
Indeed. The 2013 SR5's use the selector knob like the Limited.

Today, I changed my oil for the first time @ 3700 Miles. I figured it's not a bad idea to change it after a proper break-in period. It was pretty dark - I'm not sure if Toyota adds some break-in additive from the factory - but I'm glad I changed it regardless. Antman's thread made it a no brainer (thanks Antman! :hail: )

I also tossed on a set of 1" wheel spacers as I thought the stock 17" rims and stock sized BFG All-Terrains should be pushed out further to look proper. Then, I had to mod the front fender wells to avoid rubbing - and all is good! I think it looks much better with the wider stance (pics to come) - and I still squeak into the mud-guards/flares so I'm not flinging crap all over the side of my truck (hate that!).

After that, I gave her a quick wash and leather conditioning, checked the tire pressure, and topped off the tank. She was well-pampered today! :kiss:

Rock on! :pimp:
 
Indeed. The 2013 SR5's use the selector knob like the Limited.

Today, I changed my oil for the first time @ 3700 Miles. I figured it's not a bad idea to change it after a proper break-in period. It was pretty dark - I'm not sure if Toyota adds some break-in additive from the factory - but I'm glad I changed it regardless. Antman's thread made it a no brainer (thanks Antman! :hail: )

I also tossed on a set of 1" wheel spacers as I thought the stock 17" rims and stock sized BFG All-Terrains should be pushed out further to look proper. Then, I had to mod the front fender wells to avoid rubbing - and all is good! I think it looks much better with the wider stance (pics to come) - and I still squeak into the mud-guards/flares so I'm not flinging crap all over the side of my truck (hate that!).

After that, I gave her a quick wash and leather conditioning, checked the tire pressure, and topped off the tank. She was well-pampered today! :kiss:

Rock on! :pimp:

Hey Randyman!
Quick question, so 2013 4runners they changed the actuator for switching 2wd and 4wd. Can you drive in 4wd now on dry payment like in 4th gen or they just switch the actuator.
Thanks!
 
Just started customizing

Just got the XD Addicts and Coopers installed today. Maybe a lift next week and this and then that. I'm afraid this might not stop.4Runner.jpg
 

Attachments

  • 4Runner.jpg
    4Runner.jpg
    135 KB · Views: 7,261
Hey Randyman!
Quick question, so 2013 4runners they changed the actuator for switching 2wd and 4wd. Can you drive in 4wd now on dry payment like in 4th gen or they just switch the actuator.
Thanks!

The '13 SR5 still uses the "Part Time" 4x4 - They simply omitted the shift lever in lieu of the electronic selector knob - not sure why - but seems to work OK and I like the console layout better w/o the Transfer Case lever...


Pics of the 1" Wheel Spacers I installed yesterday (with the stock 17" SR5 Rims and 265/70R17 BFG All-Terrains). I think they look perfect :). I had to do the quick fender-liner mod up front - but after that no rubbing that I can tell!

IMG_0760_zpsb5ba3c8b.jpg~original


IMG_0762_zps66118b22.jpg~original


Spacers1_zps6b700315.png~original


With a light-foot, I still averaged 22MPG on my drive to work today - but that will go down if I dig in even a little or drive more than a few miles off the highway. I also have 300-400lbs of Audio Gear in this truck - and still get over 20MPG as long as I make a conscious effort towards fuel economy...

As you were :wave:
 
I also tossed on a set of 1" wheel spacers as I thought the stock 17" rims and stock sized BFG All-Terrains should be pushed out further to look proper. Then, I had to mod the front fender wells to avoid rubbing - and all is good! I think it looks much better with the wider stance (pics to come) - and I still squeak into the mud-guards/flares so I'm not flinging crap all over the side of my truck (hate that!).

After that, I gave her a quick wash and leather conditioning, checked the tire pressure, and topped off the tank. She was well-pampered today! :kiss:

Rock on! :pimp:

Can't wait to see the pics! :pop2:
 
2011 4Runner SR5. No mods so far (other than factory Nav). Looking at getting a lift and some new tires.

IMG_2892_zps21ef70a1.jpg~original


IMG_2879_zps98c6d2b1.jpg~original
 
Last edited:
New 4Runner 2012 Limited 4x4 Magnetic Gray

Hey guys, first time poster - long time forum reader. I finally decided to take some time and post my pictures and video of my 4Runner. Hope ya enjoy!

Also - I am looking into making the truck exhaust sound deeper and want to know what others have done to theirs so please message me!

2013-01-16_16-16-02_662.jpg2013-01-16_16-17-40_719.jpg2012-11-28_13-08-02_852.jpg

Here are all the photo's in my google docs folder:
https://docs.google.com/folder/d/0B55jVGRDmbICMi11UnFKdXZXNkE/edit

and here is a video of my Automatic Running Boards I just posted on YouTube:
Automatic Running Boards on 2012 Toyota 4Runner Limited 4x4 5th Gen - YouTube

:thanks:
 

Attachments

  • 2013-01-16_16-16-02_662.jpg
    2013-01-16_16-16-02_662.jpg
    137.3 KB · Views: 11,696
  • 2013-01-16_16-17-40_719.jpg
    2013-01-16_16-17-40_719.jpg
    138.6 KB · Views: 13,759
  • 2012-11-28_13-08-02_852.jpg
    2012-11-28_13-08-02_852.jpg
    139.1 KB · Views: 5,915
The '13 SR5 still uses the "Part Time" 4x4 - They simply omitted the shift lever in lieu of the electronic selector knob - not sure why - but seems to work OK and I like the console layout better w/o the Transfer Case lever...


Pics of the 1" Wheel Spacers I installed yesterday (with the stock 17" SR5 Rims and 265/70R17 BFG All-Terrains). I think they look perfect :). I had to do the quick fender-liner mod up front - but after that no rubbing that I can tell!

IMG_0760_zpsb5ba3c8b.jpg~original


IMG_0762_zps66118b22.jpg~original


Spacers1_zps6b700315.png~original


With a light-foot, I still averaged 22MPG on my drive to work today - but that will go down if I dig in even a little or drive more than a few miles off the highway. I also have 300-400lbs of Audio Gear in this truck - and still get over 20MPG as long as I make a conscious effort towards fuel economy...

As you were :wave:

Wheel spacers and tires....the "gateway drug" for modding. Looks good Randyman. Now, hold on to your wallet! :cheers:
 
Wheel spacers and tires....the "gateway drug" for modding. Looks good Randyman. Now, hold on to your wallet! :cheers:

Thanks!

PS - By the 2nd week I had her I'd already torn the inside to shreds doing a massive audio/video/GPS install - my wallet is now COMPLETELY EMPTY!!! :Cry:

2013 4Runner - SQL Install (Randyman) - DIYMA Car Audio Forum

Tires and spacers are just some of my more "minor/aesthetic" mods ;) The BFG's were an extremely cheap addition compared to the audio install (close to 5 figures)! Once I put a dent in my M/C bill, I'll be looking for the TRD Supercharger to be released, too!
 
Last edited:
My 5th Gen TE First Mod

2012 4Runner TE first mod is rock sliders. Have to put a good word in for John at White Knuckle Off Road. Awesome product, great customer service and an all around solid dependable guy! I'm thinking about front bumper next.....
 

Attachments

  • 201[1].jpg
    201[1].jpg
    74.4 KB · Views: 5,096
  • 176[1].jpg
    176[1].jpg
    137.2 KB · Views: 4,930

Members online

No members online now.

Forum statistics

Threads
278,316
Messages
3,554,111
Members
248,016
Latest member
Advally Service

Trending content

Back
Top