5th Gen T4R Picture Gallery

[BigWilly]

Looking good man, had a question about the wiring of the light bar and wanted to know which route you choose to wire it?

I cut the factory plug off, used some connectors at the top and shrink wrap which made the wire small enough to run down the weather stripping next to the windshield. Then I used connectors at the bottom under the hood. This way if I ever need to service the light I just disconnect. I wouldn't need to pull all the wires. I used a little clear silicon to hold the wires in the weather stripping channel.

 

[Fishpilot]

Just a few of the hundreds of photo ops we took advantage of on the 6,400 mile road trip from Philly to Cincy, KC, Denver, Ogden, John Day, Kent, Vancouver, Whistler, Prince George, Stewart, Hyder, Dease Lake, Watson Lake, Teslin, Tagish, Whitehorse, Dawson City, Top of the World, Eagle, Chicken, Slana, and finally to our new home in Anchorage. What a trip, now it's time to explore Alaska.

 

[BearsFanRyan]

My first T4R, two weeks old now. Had a Tundra and Taco before this. Here is a pic in all her naked glory at birth and another with the full weather tech package. Have side steps to put on and am thinking about getting a bull bar.

:cheers:

 

[cbielat]

Hanging in town

 

[Rattlesnake44]

Had a couple days off so headed up to Big Bear.

 

[Nando703]

I cut the factory plug off, used some connectors at the top and shrink wrap which made the wire small enough to run down the weather stripping next to the windshield. Then I used connectors at the bottom under the hood. This way if I ever need to service the light I just disconnect. I wouldn't need to pull all the wires. I used a little clear silicon to hold the wires in the weather stripping channel.

awesome! thanks for your help

 

[LawnDart]

Outside 1 Infinite Loop.

 

[Diesel]

Outside 1 Infinite Loop.

That's a sexy beast!!!

Any additional lift?

What tires/size are you running?

 

[LawnDart]

That's a sexy beast!!!

Any additional lift?

What tires/size are you running?

Icon 3" lift. 33" Nitto Trail Grapplers. Changing out the rear springs to OME 2898 to get ready for the CBI rear bumper.

 

[carlomagne]

Outside 1 Infinite Loop.

*right click save as*

hahah. Looking good!

 

[Druski]

Tonka T4R

I saw this on Instagram and thought I would share

 

[Diesel]

Icon 3" lift. 33" Nitto Trail Grapplers. Changing out the rear springs to OME 2898 to get ready for the CBI rear bumper.

What size Trail Grapplers? LT285/70R17?

How do they fit and any cut/trim of bumper/liner?

 

[Meyercord]

Icon 3" lift. 33" Nitto Trail Grapplers. Changing out the rear springs to OME 2898 to get ready for the CBI rear bumper.

Doesn't look a whole lot higher than stock upfront?

 

[Lexusbstrdchild]

[MENTION=124732]LawnDart[/MENTION], the guy creepin in the bushes looks like he's stealing some shots of your ride!

 

[LawnDart]

[MENTION=124732]LawnDart[/MENTION], the guy creepin in the bushes looks like he's stealing some shots of your ride!

I find taking photos nude in a backyard is such a freeing experience.

 

[cbielat]

Chilling

 

[LawnDart]

Doesn't look a whole lot higher than stock upfront?

It's a 3" lift in the front, there's just ya know a winch and stuff weighing it down a bit, and no cargo in the rear compartment, plus it was low on gas.

*shrugs*

 

[Meyercord]

It's a 3" lift in the front, there's just ya know a winch and stuff weighing it down a bit, and no cargo in the rear compartment, plus it was low on gas.

*shrugs*

Makes more sense now for sure.

 

[Colo15T4R]

Tin Cup Pass

 

[andreas.gaylord]

Powerline trail, off of Rampart Range Rd, CO.