• If you plan to post to Classified forums, you must follow these rules, or your post will be deleted.

    1. Thread title must include at a minimum: FS or FT, Item(1st, 2nd, 3rd, 4th or 5th gen), Price and Location. For Example: FS: 4th GEN Carpet Floor Mats - Tan, $50 Denver, CO.
    2. All Threads must contain the following information
      • What is for sale/trade (model, specs, etc.)
      • Condition
      • Price/What you want to trade for
      • Location of item
      • At least one picture of the item for sale or for trade
    3. No "Feeler" Threads - Its either for sale or it isn't.
    4. Moderators lock Classified Threads that have not had any activity in 90 days or when the part is announced SOLD.
    5. Threads not complying with the rules will be deleted without notice.

ARB Compressors - Group Buy

Received mine today, I am whole!

Thanks again my man! :thumb:

~Mark

FYI - The plastic box that the ARB portable air compressor comes in is too tall to put into the ARB drawer...ppppppppfffffffffffttttttt wtf?

I'm going to unscrew it from the box and find a smaller box or soft case. There is room to make the ARB toolbox low enough to fit into the drawer. Not sure how they missed this one.
 
Last edited:
Anyone looking for a mount, PM [MENTION=125603]bandi[/MENTION]. Received mine today and it looks great.

Very easy to communicate with and fast custom service.
 
Anyone looking for a mount, PM [MENTION=125603]bandi[/MENTION]. Received mine today and it looks great.

Very easy to communicate with and fast custom service.
Thanks Tom !.... :hello:

57D1909C-7C5C-4845-9363-D5BDEC8908AE_zpsftoclclk.jpg~original
 
well received my compressor last night........in this condition. Mounting plate was scratched up from where the holes are shown on the bottom of the box. UPS driver had to hand me the box with both his hands under the box because he was "afraid the product was going to fall out of the bottom." Don't want to put blame on either UPS or the supplier, but this def didn't rub me the right way. Everything inside looks to be ok, but only a test hookup and running of the unit will tell.
 

Attachments

  • IMG_2815[1].jpg
    IMG_2815[1].jpg
    137.1 KB · Views: 206
  • IMG_2818[1].jpg
    IMG_2818[1].jpg
    138.1 KB · Views: 239
  • IMG_2816[1].jpg
    IMG_2816[1].jpg
    137.2 KB · Views: 214
Your box was supposed to have a plastic band around the length and circumference.

Even with that mine tore the edge of the box at the bottom edge. Yours obviously came off and someone had to tape it back together.

Those bands work great unless they get nicked. If the long one broke the short one would not have held everything together for long.

Really hard to say where things started in order to end up that way. You have manufacturer, warehouse, delivery.

But that does put a whole new twist on "drop shipped".
 
well received my compressor last night........in this condition. Mounting plate was scratched up from where the holes are shown on the bottom of the box. UPS driver had to hand me the box with both his hands under the box because he was "afraid the product was going to fall out of the bottom." Don't want to put blame on either UPS or the supplier, but this def didn't rub me the right way. Everything inside looks to be ok, but only a test hookup and running of the unit will tell.

Give it a test and check for contents - if there is an issue, email the vendor and he will take care of you.

Out of 80 compressors being shipped out, one or two were bound to have issues, they are really heavy in shipping.

One of the guys on Tacomaworld received a damaged one. That being said, the vendor took care of him quick.
 
Give it a test and check for contents - if there is an issue, email the vendor and he will take care of you.

Out of 80 compressors being shipped out, one or two were bound to have issues, they are really heavy in shipping.

One of the guys on Tacomaworld received a damaged one. That being said, the vendor took care of him quick.

Did a down and dirty hookup to test, and everything is working just fine!
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,112
Members
248,016
Latest member
Advally Service

Trending content

Back
Top