ARB locker issue

[4rollin]

I recently installed a ARB RD 132 locker and after a day of driving it i discovered that the push in fitting was leaking. Once i resolved the problem a new one arose. Now when i engage the locker at a stand still it seems that there is no air leak, but when i begin to move forward i notice the air compressor will begin to activate every couple of seconds or so,which leads me to the question where is it leaking?

 

[Quadsbc]

Sounds like you should trace your air lines and see if you can hear or feel it. I can't troubleshoot an air leak from here.

 

[IBallEngineer]

I recently installed a ARB RD 132 locker and after a day of driving it i discovered that the push in fitting was leaking. Once i resolved the problem a new one arose. Now when i engage the locker at a stand still it seems that there is no air leak, but when i begin to move forward i notice the air compressor will begin to activate every couple of seconds or so,which leads me to the question where is it leaking?

Was it a "new" RD132? I ask that because the seals on the slip ring do go bad, I've had it happen to me, but I've had ARB lockers in my LC for 18 yrs now.

 

[4rollin]

yeah it's a new locker i got in on the group buy around november. l'll try to trace down the leak externally today with soapy water,but i'm worried it could be internal.