mrbrenan
official vendor
Dissent Offroad High Clearance Rear Bumper Launch & Giveaway
Here it is everyone! A very detailed look at the High Clearance Dissent Offroad Rear Bumper for the 5th Gen 4Runner. Comment below on this thread for a chance to win, and then hit the link to enter.
There is a very short giveaway running right now for this Full Bumper with Tire Swing starting today and running until July 10th. On the 11th, 1 lucky winner will be selected and announced live on Instagram and an email will go out to everyone with a 10% coupon code "trail4r" in addition to the link where you can purchase the product if you would like. Pricing will be similar to their LC 100 Series.
The odds of winning the giveaway are going to be incredibly good as it's only running for about 1 week. Good luck everyone.
Giveaway and Coupon Code Link:
Dissent Offroad Giveaway - Trail4R.com - 5th Gen 4Runner Mods
Features:
Design: High clearance bolt-on bumper with aggressive approach angles and low profile side wings
Shell Material: 3/16" Plate Steel with steel gussets that run to pivot
Recovery point material: 1/2" welded bow shackle/soft shackle compatible
Modular design: Bolt-on add swing arms anytime
Bolt-on install: Grade 8 hardware
Accessory options: Choose from a ton of swing arm options
Swing Arm Material: Hybrid of Steel and Aluminum
Latch: Dissent signature slam close latch
Double Shear swing arm mounts with grade 8 hardware
Dual bump stops on swing arms to prevent metal-on-metal contact
1" Tapered pivot bolt with 1" roller bearings both greaseable via dual zerk fittings
Stainless steel strike plate fixed on the shell with UHMW plastic content on swing arms
Camp table on tire swing arm (comes standard)
Adjustable tire mount (fits wide offset range, + to -12 confirmed)
Compatible with C4/Gobi ladder confirmed
Relocation kit for 4-pin tow harness
Safety chain mount points for towing
License plate mount points
License plate lighting kit (designed, engineered, and manufactured in-house)
Dissent-tapped and branded badges
Lighting Options:
1. Smoked-out lights
2. Full-color stop, turn and reverse
3. Universal fitment plates available
Hitch Options:
1. High Clearance weld-in option (pictured): Comes with a partially welded hitch to the front plate. Hitch, front plate, back plate, and bottom plate.
2. Dissent Drop Hitch Kit: Blank plate, hitch, and hardware
3. No Hitch
Here it is everyone! A very detailed look at the High Clearance Dissent Offroad Rear Bumper for the 5th Gen 4Runner. Comment below on this thread for a chance to win, and then hit the link to enter.
There is a very short giveaway running right now for this Full Bumper with Tire Swing starting today and running until July 10th. On the 11th, 1 lucky winner will be selected and announced live on Instagram and an email will go out to everyone with a 10% coupon code "trail4r" in addition to the link where you can purchase the product if you would like. Pricing will be similar to their LC 100 Series.
The odds of winning the giveaway are going to be incredibly good as it's only running for about 1 week. Good luck everyone.
Giveaway and Coupon Code Link:
Dissent Offroad Giveaway - Trail4R.com - 5th Gen 4Runner Mods
Features:
Design: High clearance bolt-on bumper with aggressive approach angles and low profile side wings
Shell Material: 3/16" Plate Steel with steel gussets that run to pivot
Recovery point material: 1/2" welded bow shackle/soft shackle compatible
Modular design: Bolt-on add swing arms anytime
Bolt-on install: Grade 8 hardware
Accessory options: Choose from a ton of swing arm options
Swing Arm Material: Hybrid of Steel and Aluminum
Latch: Dissent signature slam close latch
Double Shear swing arm mounts with grade 8 hardware
Dual bump stops on swing arms to prevent metal-on-metal contact
1" Tapered pivot bolt with 1" roller bearings both greaseable via dual zerk fittings
Stainless steel strike plate fixed on the shell with UHMW plastic content on swing arms
Camp table on tire swing arm (comes standard)
Adjustable tire mount (fits wide offset range, + to -12 confirmed)
Compatible with C4/Gobi ladder confirmed
Relocation kit for 4-pin tow harness
Safety chain mount points for towing
License plate mount points
License plate lighting kit (designed, engineered, and manufactured in-house)
Dissent-tapped and branded badges
Lighting Options:
1. Smoked-out lights
2. Full-color stop, turn and reverse
3. Universal fitment plates available
Hitch Options:
1. High Clearance weld-in option (pictured): Comes with a partially welded hitch to the front plate. Hitch, front plate, back plate, and bottom plate.
2. Dissent Drop Hitch Kit: Blank plate, hitch, and hardware
3. No Hitch
Last edited:
