Eibach pro truck lift first vs second notch install

[5th_gen_Porkchop]

I just finished to install an Eibach pro-truck lift and questioning myself if I go second notch or I leave it like it is now. I ran the truck for 20 km before any measurement (enough?), now I have 37" front 38" rear and it shows, I would like it to be more level so should I go second notch? I call the community. :biggrin1:

 

[5thToy]

Measuring from the fender well is deceiving. Have you measured from the bottom of the frame rail to the ground front and rear?

 

[5th_gen_Porkchop]

Measuring from the fender well is deceiving. Have you measured from the bottom of the frame rail to the ground front and rear?

Fender well to ground

 

[?????]

The lift will settle little bit as you drive it.

I personally prefer to maintain a little rake as I occasionally load the rear end and tow.

Helps keep the headlights from aiming at the sky and when driving it doesn't look lopsided.

 

[5th_gen_Porkchop]

Thinking 1/2 more in front would be perfect and maybe better just add spacers to keep the smooth ride.

 

[Crank_Mancastle]

2nd notch is supposed to push it to around 3.4". Any of the other higher 2 notches are there in case you add a lot of weight, like a bumper. I would say wait a bit and see if it settles at all.

Sent from my SM-G965U using Tapatalk

 

[nimby]

I'm at the 1.6" notch up front with mine and 0" in the back. The frame is level.