EDIT: I AM NO LONGER PURSUING THIS GROUP BUY. IF SOMEONE ELSE WANTS TO TAKE OVER, FEEL FREE.
Gauging interest in a set of front and rear springs that would provide 1" of lift and are 10-15% stiffer than stock for 5th gen 4Runners. Here is the link to the original thread about this type of lift and what niche it could fill: http://www.toyota-4runner.org/5th-gen-t4rs/222917-lift-i-want-doesnt-exist-would-you-buy.html
The coils would be designed to provide 1" of lift all around on a 5th gen, but the front springs would also have applications for 4th and 3rd gens as well as 1st and 2nd gen Tacomas and FJ Cruisers. I haven't done the math/research to guess at what the lift amounts would be for anything other than 5th gen 4Runners.
How it would work:
According to Eibach the quantity of EACH PAIR (2) required to make it cost effective for the consumer to do a custom run of springs is 20 PAIRS. 20 fronts, 20 rears, or both. This would get us pricing the same as buying an off-the-shelf set of springs or could possibly even result in lower (typically wholesale) pricing. As an estimate, assume each pair of springs will be $170 +shipping
If there is enough interest I will explore the best way to order/pay for/ship them. As I am not a business nor do I have the space for 40 pairs of springs in my house hopefully payment and shipping directly from Eibach is a possibility. The springs would require a deposit to Eibach for them to begin production.
For now just reply below with interest in FRONT, REAR or BOTH and I'll get a list going.
Gauging interest in a set of front and rear springs that would provide 1" of lift and are 10-15% stiffer than stock for 5th gen 4Runners. Here is the link to the original thread about this type of lift and what niche it could fill: http://www.toyota-4runner.org/5th-gen-t4rs/222917-lift-i-want-doesnt-exist-would-you-buy.html
The coils would be designed to provide 1" of lift all around on a 5th gen, but the front springs would also have applications for 4th and 3rd gens as well as 1st and 2nd gen Tacomas and FJ Cruisers. I haven't done the math/research to guess at what the lift amounts would be for anything other than 5th gen 4Runners.
How it would work:
According to Eibach the quantity of EACH PAIR (2) required to make it cost effective for the consumer to do a custom run of springs is 20 PAIRS. 20 fronts, 20 rears, or both. This would get us pricing the same as buying an off-the-shelf set of springs or could possibly even result in lower (typically wholesale) pricing. As an estimate, assume each pair of springs will be $170 +shipping
If there is enough interest I will explore the best way to order/pay for/ship them. As I am not a business nor do I have the space for 40 pairs of springs in my house hopefully payment and shipping directly from Eibach is a possibility. The springs would require a deposit to Eibach for them to begin production.
For now just reply below with interest in FRONT, REAR or BOTH and I'll get a list going.
Last edited:
