Fishing Rod storage solution

arizona4runner

New member
So I live up here in Flagstaff Arizona where the lakes are beautiful and the fish are big and very hungry. I love to go fishing but I always have an OCD struggle trying to find a very good way to arrange my rods for transport.... then BAM it hit me. Why not build a system in which my rods can be safely stored and mounted next to the roof rack. After lots of research and lots of trial and error, I finally came up with a system that fits my needs and one I can also use for storing lots of other things. The Dry Tube Cargo System came to life and it is so awesome!! It is 80 inches long and the inside of the tube is 4 inches in diameter. The rear cap is sealed and glued and definitely not going anywhere and the front cap is threaded for easy access. The rear door clears easily and the mounts are rock solid to my roof rack. I could honestly fit a lot of things in here along with my fishing rods and I am greatly considering a twin on the other side to even it out. Enjoy the few pictures even though they are sideways... I'm thinking about building the systems and possibly shipping them out so let me know if you are interested or have any questions. :hello: IMG_2180.jpg

IMG_2181.jpg

IMG_2182.jpg
 

Attachments

  • IMG_2180.jpg
    IMG_2180.jpg
    123.6 KB · Views: 2,658
  • IMG_2181.jpg
    IMG_2181.jpg
    122.7 KB · Views: 2,640
  • IMG_2182.jpg
    IMG_2182.jpg
    129 KB · Views: 2,491
Register to hide this ad
Looks good man. I went the easier, cheaper route with my fishing rack. ImageUploadedByTapatalk1438399687.274004.jpg
ImageUploadedByTapatalk1438399710.969388.jpg
 

Attachments

  • ImageUploadedByTapatalk1438399687.274004.jpg
    ImageUploadedByTapatalk1438399687.274004.jpg
    117.3 KB · Views: 4,234
  • ImageUploadedByTapatalk1438399710.969388.jpg
    ImageUploadedByTapatalk1438399710.969388.jpg
    133.1 KB · Views: 8,052
I did like you, built a tube that can fit on my Yakima Rack, The problem I had with screw caps was the inability to lock them, like you I am OCD but about theft! So I went with 6 inch PVC about 5.5 feet since my rods were mostly two piece and for the ends, I bought the metal fittings for making a conduit carrier which came with u bolts for mounting on my rack. I covered the tube with Camo Shelf liner, that was horrible mistake, about three weeks of sun and it faded badly and was a pain to remove. I finally got it off along with the sticky adhesive residue and am going to prime and paint it. Besides the rods, it holds trap poles, hiking poles and other long items I would rather not have turn into flying spears in the SUV! link to a pic on my flickr page.

http://www.flickr.com/photos/cpatelastrophotos/20208303422/in/dateposted-public/
 
Last edited:
I need to make one of these when I head back up to flag. Last year was full of fishing trips to lake mary with 4 guys crammed around 4 poles in a WRX
 
cp99 I really like that hatch you have on there and the ability to lock it, something I may look at down the road! Great minds think alike!

Rambler! Private message me when you get up to flag and if you buy all the parts, I can show you exactly where to get the right stuff (PITA to find in town) and I will help you build it!! No charge to me or anything!! and we will go fish!! I am always down to go fishing!! Keep in touch!!
 
I used to have a similar set up with a rod holder retro fitted to the roof, then I went with a system kind of like this.

Rod Saver Vehicle Rod Carrier | Bass Pro Shops

Only difference is the back does not droop and for the front I use a laundry bar thing. It limits the vertical storage inside by a couple inches in the back, but it keep the rods inside the vehicle away from dust, dirt, water, grime, and is just another obstacle to theft.
 
The ULTIMATE ROD TRANSPORTATION SYSTEM

I have had this issue for years!
DIY rod holders drilled through the racks, Ski-carriers, baskets

None of this stuff worked for one reason or another.
Looks like this new product on the market that was designed specifically for that will finally sole all the shortcomings of these solutions mentioned earlier.

Check it out!
I pre-ordered mine already!
https://gearrak.com/
 

Attachments

  • 20170623_160326.jpg
    20170623_160326.jpg
    136.1 KB · Views: 2,851
I have had this issue for years!

DIY rod holders drilled through the racks, Ski-carriers, baskets



None of this stuff worked for one reason or another.

Looks like this new product on the market that was designed specifically for that will finally sole all the shortcomings of these solutions mentioned earlier.



Check it out!

I pre-ordered mine already!

https://gearrak.com/



I Like It!

I use to haul my rods stuffed in my boat handles and that worked fine even on a long haul. Since our recent move, I now Rack store the boat a half hour south and don’t want to leave my rods on it unattended. This looks like a good alternative!


Sent from my iPhone using Tapatalk
 

Members online

Forum statistics

Threads
278,307
Messages
3,554,054
Members
248,016
Latest member
Advally Service

Trending content

Back
Top