FS 3rd Gen Large Body Lifts

[shootmymime]

Doing great man, just realized yesterday I lost one of the nuts but that was my fault lol. Now just trying to find some tires that dont look so small on 4runner. This body lift makes my 33s look tiny.

yeah dont look at mine with 31's piss i know!

 

[Troutsrunner]

yeah dont look at mine with 31's piss i know!

When I find some 35s you can have my 33s, just pay for shipping and they are yours.

 

[dabigbadmoke]

Just ordered a 2" bl for my 99 highlander!!! Can't wait!

 

[angus]

monday i should have a bunch.

Do you make a 3" BL?

 

[shootmymime]

Do you make a 3" BL?

i do not, sorry.

 

[brandonlear]

Any 1.5" or 2" left for a 1999 SR5? How long does install take? How do you go about changing the bumper position to make it look factory again?

 

[shootmymime]

Any 1.5" or 2" left for a 1999 SR5? How long does install take? How do you go about changing the bumper position to make it look factory again?

hey brandon sorry i missed your post the other day.

i do have plenty of 1.5 and 2" in stock, only problem is bolts i am dealing with messing with my company that sells them. but if you would like to get in contact with me feel free to send me a PM or a message on fb, (link is on the 1st page)

Raising the bumper is pretty simple, review the install instructions also under my links. its the google doc. super simple if you can get ahold of a drill, bit and a couple small nuts and bolts then your golden! let me know if you have any other questions.

 

[LIVEVIL]

Does anyone have pics of a .5 lift on their Runners?

 

[alaskafisherman]

I got the FAT PATS 2" body lift installed and its sweet!!!
97 sr5 3" custom front lift, OME 891 rear lift springs 35's that no longer rub everything when turning, also had done significant cutting on wheel wells... prior to body lift.

 

[shootmymime]

I got the FAT PATS 2" body lift installed and its sweet!!!
97 sr5 3" custom front lift, OME 891 rear lift springs 35's that no longer rub everything when turning, also had done significant cutting on wheel wells... prior to body lift.

Sick man!!! That sticker looks good! Haven't seen a good pic like that on a truck..

 

[alaskafisherman]

Sick man!!! That sticker looks good! Haven't seen a good pic like that on a truck..

Thanks, I can turn the 35's side to side without any rubbing now :rofl:

 

[A.Wilson013]

Have you had anyone mention that the mount 2nd mount from the front (the one right under the drivers/passengers feet) needed a longer bolt with the 1/2" kit? When I installed mine I couldn't get it to thread...

Here's a pic of mine with the 1/2" kit. PERFECT gap between body and bumpers now.

DSC_0018 by awilson013, on Flickr

 

[shootmymime]

Have you had anyone mention that the mount 2nd mount from the front (the one right under the drivers/passengers feet) needed a longer bolt with the 1/2" kit? When I installed mine I couldn't get it to thread...

your the first. how much gap did you have prior to taking the factory nut off the bolt? before you even started that is.

im surprised you had this problem. unless you didn't have any threads sticking out to start with im surprised it would not even catch a thread to get it started.

did the bushing go back in the same order?

Well im glad you were able to figure something out and get it installed!

 

[infamousRNR]

Ok now you have stickers???

Send one my way!

 

[shootmymime]

Ok now you have stickers???

Send one my way!

Pm me your address


Same with anyone else. Send me your address and I'll get some out.

 

[Quadsbc]

Have you had anyone mention that the mount 2nd mount from the front (the one right under the drivers/passengers feet) needed a longer bolt with the 1/2" kit? When I installed mine I couldn't get it to thread...

Here's a pic of mine with the 1/2" kit. PERFECT gap between body and bumpers now.

DSC_0018 by awilson013, on Flickr

We're you able to keep the factory splash guards in the wheel wells?

 

[shootmymime]

We're you able to keep the factory splash guards in the wheel wells?

yes you sure can with a 1/2 lift.

 

[shootmymime]

update

So I had a returning customer purchase another body lift for his truck a couple months a after he bought the original one.


I asked him why he wanted another a told me this.

"I went off-roading and got stuck, the truck was there for about an hour as I was looking for help.
The brush under the truck had caught fire and took the rest of the truck. Your body lift did not survive."

 

[tyr0981]

:wow2: holy crap man!

 

[BMWgiant4RUNN]

Is there a video of anybody installing these? How difficult is it to do? I know, drill holes in the bumper to raise it, however I am lost with the rest. I am a visual learner.