FS 3rd Gen Large Body Lifts

[shootmymime]

It's actually super easy. Have you seen the instructions?

Basically you have to remove a couple interior panels to get to the bolts.
Take the nuts loose off all the bolts
Pull the bolts out
Jack one side of the body up
Slide new picks in
Drop new bolts in and bolt them back up.

Seriously that's it.

There are a few more things like removing the radiator shroud and raising the front bumper.

 

[s20004runner]

interested in 1/2 BL.

other than inserting the BL spacers, do I need to do other things like

loosen transmission linkage, steering extender, re-drill for (stock) bumper, etc?

 

[shootmymime]

Nope nope nope nope

1/2 are the easiest to install and hardly cost anything that's why they are so cheep compared to the other sized lifts.

 

[s20004runner]

Nope nope nope nope

1/2 are the easiest to install and hardly cost anything that's why they are so cheep compared to the other sized lifts.

I will take a set. Shoot me your paypal email and I can send the payment for 1/2 BL. Thanks.

 

[shootmymime]

I will take a set. Shoot me your paypal email and I can send the payment for 1/2 BL. Thanks.

[email protected]

be sure in include the year of 4runner you have and shipping address somewhere for me. Thanks!

 

[s20004runner]

payment sent - let me know if you don't see an address in the memo.

 

[shootmymime]

payment sent - let me know if you don't see an address in the memo.

Got it and done. Box is made, address posted on it and sticker in it. Going to probably make it and ship it tomorrow. You should se it Friday if I do get it out tomorrow.

 

[1moreToy4me]

Do you have a picture of the shifter console for a automatic after install?

What do you do about the transmission linkage?
As well as the radiator drop?

Very interested in a purchase what is your current turn time?
Thanks

 

[shootmymime]

Do you have a picture of the shifter console for a automatic after install?



What do you do about the transmission linkage?

As well as the radiator drop?



Very interested in a purchase what is your current turn time?

Thanks

Auto shifters are the same nothing changes.

Some say you don't have to adjust the linkage.

Radiator Drop I have you adjust the lower shroud not the radiator. Works great.

Depending on the lift your order changes my turn around time. I'm currently waiting on bolts to come in and have 3 boxes ready to go but waiting on my order of bolts. It should be here very soon. I'm pissed it's taking this long actually.

I'd say a week or less at most. But I shipped a 1/2 out today.

 

[shootmymime]

bump for some packages going out today and some more being built.

 

[Asaspades93]

After my months of nagging him for not having stickers

 

[snivilous]

I want a sticker.

 

[shootmymime]

I want a sticker.

I want some hime UCAs

 

[Asaspades93]

I want some hime UCAs

I just want ucas

 

[SIN-Japan]

Email sent to you for the 1/2" BL.
Thanks

 

[Raintrees]

Well i got my Bl in on sat, got around to installing today in the rain. still havnt finished up the bumper yet. Ty so much for the great product!

 

[fourfive]

Are most people running the 2 inch body lift still keeping the radiator in its original location and not dropping it with brackets?

 

[Boosted1]

Payment sent for the 0.5" for a 97 4runner

 

[shootmymime]

Are most people running the 2 inch body lift still keeping the radiator in its original location and not dropping it with brackets?

yes, but when you have time you also have the option to lower it exactly 2 inches lower on the body because there are bolt holes that happen to line up.

Payment sent for the 0.5" for a 97 4runner

thanks. its going out tomorrow. sorry it took a day longer, its been a hectic week.

 

[fourfive]

yes, but when you have time you also have the option to lower it exactly 2 inches lower on the body because there are bolt holes that happen to line up.

If there are bolt holes that already exist, does that mean a drop bracket would not be needed to lower the radiator 2 inches?

What is your steering extension made of?