King Shocks Rear 2.5 Remote Reservoir Shocks w/Adjuster for 4Runner / FJ Cruiser
Purchased new from Mudify on 11-18-2024 and used for only 3000 miles.
Removed these so I could setup my 4RUNNER back down to stock suspension
Some slight marks here or there, but overall looks great. Stanchions are in perfect shape.
$1000
pickup locally in Nashville, TN or willing to ship to buyer for actual shipping costs
SPECIFICATIONS
• Body Diameter: 2.5 inches.
• Location: Rear.
• Brand: King Shocks.
• Part number: 25001-125A.
• Made in the USA.
• Suitable for:
o Toyota 4Runner (2003-ON).
o Toyota FJ Cruiser (2006-2014).
o Toyota LandCruiser 200 Series (2003-2009).
o Lexus GX470 (2003-2009).
o Lexus GX460 (2010-ON).
• FEATURES:
o Lightweight hard anodized 6063 aluminum alloy reservoirs.
o Internally threaded top cap.
o 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function.
o Heat treated 6061 aluminum alloy piston.
o Large diameter shafts have a minimum tensile strength of 100,000 pounds per square inch.
o Aluminum components and vehicle specific mounts are machined from aircraft quality billet.
Purchased new from Mudify on 11-18-2024 and used for only 3000 miles.
Removed these so I could setup my 4RUNNER back down to stock suspension
Some slight marks here or there, but overall looks great. Stanchions are in perfect shape.
$1000
pickup locally in Nashville, TN or willing to ship to buyer for actual shipping costs
SPECIFICATIONS
• Body Diameter: 2.5 inches.
• Location: Rear.
• Brand: King Shocks.
• Part number: 25001-125A.
• Made in the USA.
• Suitable for:
o Toyota 4Runner (2003-ON).
o Toyota FJ Cruiser (2006-2014).
o Toyota LandCruiser 200 Series (2003-2009).
o Lexus GX470 (2003-2009).
o Lexus GX460 (2010-ON).
• FEATURES:
o Lightweight hard anodized 6063 aluminum alloy reservoirs.
o Internally threaded top cap.
o 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function.
o Heat treated 6061 aluminum alloy piston.
o Large diameter shafts have a minimum tensile strength of 100,000 pounds per square inch.
o Aluminum components and vehicle specific mounts are machined from aircraft quality billet.
Attachments
Last edited:
