Help I need brake junction

[spes]

I have a 2006 SR5 4Runner,
When it was up on the lift the mechanic pointed out a brake junction that looked ready to go. About half way down the car on the drivers side. Looked like 4 lines feeding into it.
The mechanic said that this part isn't made any more. What the heck do I do now?

 

[MikeinNH67]

Do you happen to have a picture? I don't know of any 4 way junction that far back. There is a transition from hard lines to rubber lines by the rear axle, they all come together right there but not all 4, it's 2 and 2. I replaced all the lines on mine that go to the rear brakes with no issues. The rubber flex lines are available at least in the aftermarket world. The hard lines can be made which is what I did.

 

[4r-4ever]

yes, you can still buy it from toyota. i replaced mine last year due to corrosion. it's actually feeding the rear brakes. 2 going to the rear. 2 going to the booster.

I have a 2006 SR5 4Runner,
When it was up on the lift the mechanic pointed out a brake junction that looked ready to go. About half way down the car on the drivers side. Looked like 4 lines feeding into it.
The mechanic said that this part isn't made any more. What the heck do I do now?