How many 3rd Gen 2wd's do we have lifted?

[Mike&Ike]

id love to see a picture of that light at night to see how well it works

I have tried taking a picture at night, but they always turn out shitty. It is insanely bright. Bright enough to blind you on a sunny day. The down side is hood glare, but I do not experience it as bad as my hood is black. I plan to get it painted matte black because it is starting to fade. I will try and get some pictures for you.

 

[BentleyThe4Runner]

2001 3.4l 2wd

I know its a bit late to be replying but heres my baby...2WD 3.4L with a 3" lift. I just bought it not too long ago and Im hoping to look into locking in or converting it because Im in love with the truck but the only downside was it not being a 4x4

 

[95yotarunner619]

heres my lifted (elocked in 2 weeks) 2wd rig. love her.

but wanna do a 4wd conversion

 

[averyislost]

And here is mine! 3 inch lifted as well (although I'm now in need of tires)
This thread is awesome btw

 

[Trikz]

Here's an updated pic of mine! I just moved from Puerto Rico to Erie, PA and I brought my 4Runner with me

 

[kishanSR5]

Here is my truck.

 

[4runneraddict]

Bringing back an old thread.

Here is my 2002 2wd Sport. A bit of after and before.

 

[Longhorn425]

Yes, please revive this thread. I have a 2WD as well. I'm not really an outdoor enthusiast as much as y'all, so mine is literally a mall crawler.

I am obsessed with how the 3rd gens looks though and had to have one. Currently upgrading a stock limited. first mod was adding the stock spoiler in the back. It just looks naked without it.

 

[YouFools]

Revive this thread!

Hoping to bring this one back. I lifted my 2WD with a Rough Country lift (coilover strut lift, not a spacer lift).
Freedom Offroad UCA's
Whiteline LCA bushings
New OEM LBJ's
I will post some pictures of my issue actually. Seems like my front lower suspension components are deflected so much (LCA and LBJ). Any idea what this issue can be? RC is sending me a new front setup because they believe this is also too tall for the front like it's not settling or allowing any droop or travel.
Measures 25.5" from center wheel hub to bottom lip of fender both sides.

 

[octanejunkie]

Hoping to bring this one back. I lifted my 2WD with a Rough Country lift (coilover strut lift, not a spacer lift).

Freedom Offroad UCA's

Whiteline LCA bushings

New OEM LBJ's

I will post some pictures of my issue actually. Seems like my front lower suspension components are deflected so much (LCA and LBJ). Any idea what this issue can be? RC is sending me a new front setup because they believe this is also too tall for the front like it's not settling or allowing any droop or travel.

Measures 25.5" from center wheel hub to bottom lip of fender both sides.

Have you successfully aligned the vehicle after the lift?

What are your cam settings, front and rear?

Sent from my Pixel 4 XL using Tapatalk

 

[YouFools]

Have you successfully aligned the vehicle after the lift?

What are your cam settings, front and rear?

Sent from my Pixel 4 XL using Tapatalk

It has been attempted 3 times for an alignment. It is unable to be set. Cam bolts are not seized. Positive camber remains. Toe is even and good.

 

[JoeT4R]

All I’ll say is, my man TexasT4R on Instagram has the baddest 2WD 3rd gen. I don’t think he’s on T4R though

 

[FromTheInside]

All I’ll say is, my man TexasT4R on Instagram has the baddest 2WD 3rd gen. I don’t think he’s on T4R though

I’m here.

<a href="https://ibb.co/WkgPbRZ"><img src="https://i.ibb.co/ByqrXYb/5-A7-D7412-3861-427-E-81-A4-75-B9-DA815-D80.jpg" alt="5-A7-D7412-3861-427-E-81-A4-75-B9-DA815-D80" border="0"></a>

 

[JoeT4R]

[MENTION=152995]FromTheInside[/MENTION] My man!

 

[dharma707]

All I’ll say is, my man TexasT4R on Instagram has the baddest 2WD 3rd gen. I don’t think he’s on T4R though

Agreed. I constantly stalk his IG and ask questions. He’s the reason I went with the T1 springs recently.


Sent from my iPhone using Tapatalk