I see a lot of rigs with these 3 little front lights: functional or aesthetic?

rob_dixon

New member
Imgur: The magic of the Internet

Seems there would be little light output.

TDTSPyz


BTW, how come I cant get photos to show embedded in the thread?
 
Register to hide this ad
Just for looks on the 4Runner. They're copying 3 of the 5 LED off the Raptor which must have the 5 lights by law because of how wide it is.

https://cdn.shopify.com/s/files/1/1410/9280/products/F117382860103-3.jpg?v=1513897852

EDIT: Vehicles over 80 inches wide need them along with some lights in the rear. A 4Runner with +3.5 LT kit would fall in this category, but not sure if it's enforced on aftermarket modifications.

No. It's just what rolls out the factory doors.

And you don't need DOT inspection on your 4runner.
 
It’s a fad and something I file under the same folder of people who put “angel eyes” on their cars and trucks. Putting a styling or functional element of another vehicle to make it look like something it’s not.


Sent from my iPhone using Tapatalk
 
It’s a fad and something I file under the same folder of people who put “angel eyes” on their cars and trucks. Putting a styling or functional element of another vehicle to make it look like something it’s not.


Sent from my iPhone using Tapatalk

Ok sorry man but I have to do this. You got a 12 4Runner with a 14+ facelift.
 
I thought the 80" was for trailers and not the main vehicle?

No, and ironically it's because of the FRONT and REAR track width, most duallys just have that because of their wide asses. Raptors are wide in front and in back like a dually.

They don't even fit in half of the parking spaces in the Bay Area.
 
No, and ironically it's because of the FRONT and REAR track width, most duallys just have that because of their wide asses. Raptors are wide in front and in back like a dually.

They don't even fit in half of the parking spaces in the Bay Area.

:thumb:

As you can see I don't tow.

Actually got nothing to tow...yet.
 
It's for aesthetics. For me, every 4Runner front end looks the same so I like making my front end stand out and look different. Never have I thought, oh man my 4Runner looks like a Raptor now lol. To each their own
 
You realize you have TRDP wheels on your rig right? Sorry, had to.

It’s a fad and something I file under the same folder of people who put “angel eyes” on their cars and trucks. Putting a styling or functional element of another vehicle to make it look like something it’s not.


Sent from my iPhone using Tapatalk
 
i think it makes the 4runners look like UFO's.

I like it though, just not enough to replace my light bar that resides in the same location (which serves a very special purpose to people who cut me off).
 
Ok sorry man but I have to do this. You got a 12 4Runner with a 14+ facelift.

Sure did. The Pelfreybilt bumper was the only aluminum winch bumper available at the time and it required me to retrofit 14+ headlights as part of the install. Needed somewhere to mount my winch and some extra protection when I smash into rocks. I actually like the looks of pre facelift 4runners better but wanted to keep front end weight lower so it made sense to me. :shrug:
 
No, and ironically it's because of the FRONT and REAR track width, most duallys just have that because of their wide asses. Raptors are wide in front and in back like a dually.

They don't even fit in half of the parking spaces in the Bay Area.

Raptors are 7” wider than a standard F150 (without the mirrors). They’re within about 3/8” of the width of an H1 Hummer (without the mirrors) and actually have a 2” wider track. Used to scare the shit outta me when I went down to t Bay Area.
 

Members online

Forum statistics

Threads
278,315
Messages
3,554,131
Members
248,016
Latest member
Advally Service

Trending content

Back
Top