King 25001-151-EXT Settings

[SlickmisterN]

Hey, was hoping if you had this 2.5 coilover could you post some info;

1. Spring Rate (600, 650, 700)

2. How many exposed threads - approx.

3. Fender to center of hub measurement

4. Any other helpful info like if you have a steel bumper and winch...


Trying to get a feel for where I need to set mine with 600lb springs for approx. 22" fender to center of hub height.

TIA!

 

[SlickmisterN]

Bump. Any help or rough guesstimates appreciated.

 

[thezentree]

Hey, was hoping if you had this 2.5 coilover could you post some info;

1. Spring Rate (600, 650, 700)

2. How many exposed threads - approx.

3. Fender to center of hub measurement

4. Any other helpful info like if you have a steel bumper and winch...


Trying to get a feel for where I need to set mine with 600lb springs for approx. 22" fender to center of hub height.

TIA!

I've got 151-EXTs with 600lb coils, will try to get some measurements this afternoon.

 

[Romeo1]

What are the setup recommendations from the place you bought the shocks from?

 

[Unner]

If you look at my build around post 767 I had some measurements and threads discussion when I installed my king's a few years ago. Don't forget to factor in additional or lesser weight you may have when comparing to other people's measurements.

 

[thezentree]

21-3/4” hub to fender with about 1-1/4” of thread showing at the top of the shock. It’s how King shipped it and I never messed with it since it put me where I wanted to be.

I have a steel winch bumper, winch, and steel front skid on it.