Liftgate window frame & motor replacement

[Yates]

Hello everyone. I've searched both here and the internet and coming up empty. I have a 2010 and the entire rear window assembly rusted and fell apart. I have removed the window frame which was barely connected and the motor which was completely rusted , seized and dangling.

My questions

1. What/how does the regulator mount to?
2. Since the original was so rotten. I'm not sure how to route the cable for the window frame, is there a diagram that is more complete than the parts fiche?

Thank you for your help, I'm trying to get this done myself and run out of skills on my own.

 

[d_clark]

I have some pdfs, technically for a 2014, but the rear door assembly should be the same.

PM me your email address, and I can forward over the doc.

 

[mtb_frk]

Bumping this up in hopes that this can help me fix the same problem. Looking for some drawings so I know what I’m tackling with this project. Also, for the OP I know it’s been a while, but am wondering if you were able to fix it yourself.

Thanks!

 

[AuSeeker]

Bumping this up in hopes that this can help me fix the same problem. Looking for some drawings so I know what I’m tackling with this project. Also, for the OP I know it’s been a while, but am wondering if you were able to fix it yourself.

Thanks!

The OP hasn't been back on the forum since the day after this topic was started, over 5 years ago, the other member who has the PDFs hasn't been on the forum since January, so I'm going to "mention" him [MENTION=28870]d_clark[/MENTION] in case he stops in on the forum it will notify him of this topic/post, and hopefully sees your request.

 

[mtb_frk]

Thanks again. Hopefully they’ll see it.