Limited owners, please help! (There's a reward for it!)

[pearlj10]

I have an 03 SR5 and bought some power seats to replace my manuals. I had no idea that the wiring harnesses between manual and power seat vehicles, both the vehicle floor harness side and the "seat wire/seat wire no.2 side," were very different. I've pretty much figured out the wiring of the floor harness running to the seats but the factory wiring diagrams don't clearly show (at lest to me) the wiring between the floor harness/seat wire harness junction and the various motors, seat belts, occupant sensors, etc.

Can someone with power seats please post a few pictures that clearly show how the various colored wires on the factory harness side connect to the seat harness wires so I can finally see an end to this project? I need pics of driver's and passenger's seats. I'm willing to throw in a free pair of my famous rear sway bar links, as featured in 4WD Toyota Owner Magazine, to the first member that can help me solve this puzzle.

Thank you in advance!

Here's a pic of my SR5 floor harness wires at the seat junction (power and ground wires at left; seat belt, seat track air bag sensor, etc. wires at right). I understand that a couple of the wires on the right are different colors on the limited harnesses).

 

[pearlj10]

And the seat wire harness side (power are 2x thick light green wires, grounds are 2x thick w-b, not sure about rest).

 

[Stellar]

In the interest of saving time, can you tell me the quickest route to these connections? If they're not too difficult to get to I'll go out and snap pics right now.

 

[Stellar]

So I originally thought you just wanted to see the seat harness connector, but after reading again it sounds like you're interested in seeing both sides.

FYI, this is a 2007 Limited.

Here is the Driver's Side Seat connector.

 

[Stellar]

And here is the Passenger Side Seat connector.

 

[Stellar]

If you are indeed looking for pics of the vehicle harness side, which I now think you are, I'll have to get those to you tonight or tomorrow morning. Gotta burn up the road for work now, but hopefully this gives you something to look at and ponder in the meantime.

 

[bamma]

IIRC, I had to get the harness from the IRC 06 limited I salvaged along with the heater switches and fuses from under the hood for the seat heaters. Worked great in my 03.

 

[pearlj10]

Stellar, thank you much for the seat harness pictures. Yes, vehicle harness side pictures of your 06 would be most helpful. Thanks in advance!

If you are indeed looking for pics of the vehicle harness side, which I now think you are, I'll have to get those to you tonight or tomorrow morning. Gotta burn up the road for work now, but hopefully this gives you something to look at and ponder in the meantime.

 

[pearlj10]

Thanks bamma.

IIRC, I had to get the harness from the IRC 06 limited I salvaged along with the heater switches and fuses from under the hood for the seat heaters. Worked great in my 03.

 

[pearlj10]

I'd like to extend my gratitude to member MidwestT4R for messaging pictures and a schematic of his 03 Limited seat wires and floor harnesses. Super helpful and the kind of member that really makes a forum like this so great. Thanks!

 

[Stellar]

Good luck with the install!

 

[pearlj10]

Stellar: any chance you could send me pictures of the vehicle side harnesses of your 06? Thanks

Good luck with the install!

 

[pearlj10]

Friday bump for vehicle harness connector pictures.

 

[pearlj10]

Saturday bump for vehicle-side pictures.

 

[Stellar]

[MENTION=18304]pearlj10[/MENTION] Here are pics of the vehicle side connector for the driver's seat.

 

[Stellar]

[MENTION=18304]pearlj10[/MENTION] And the vehicle side connector for the passenger's seat.