Mudhorn
New member
I have been using the Powertank for nearly 10 years. Most places that service fire extinguishers and some dealerships can fill them. You do need to get the tank inspected and serviced every couple of years.
M.O.R.E NEW Products! Powertank Bracket & ARB Dual Compressor Mount
- Thread starter Battle Born Offroad
- Start date
I have been using the Powertank for nearly 10 years. Most places that service fire extinguishers and some dealerships can fill them. You do need to get the tank inspected and serviced every couple of years.
david05111
New member
I know this is an old thread, but I too would like to know this. The listing on the website states a drill is required, but I really would rather not have to drill holes in my new truck if I can avoid it.
Also, how much utility does one get out of a gallon tank? I suppose it depends on how much PSI it can handle, but in terms of running air tools or lockers or anything, does a one gallon tank in conjunction with the compressor offer significant utility?
Battle Born Offroad
New member
This is a bolt on application, no drilling required. the 1 gallon tank is great if you plan on bringing air tools out and need a pop of an impact wrench. the gallon tank offers increased air capacity and is a great addition.
david05111
New member
Outstanding. I’ll put it on the “to order” list
EddieV4runnin
New member
Coming soon from M.O.R.E. & Battle Born Offroad!
Yesterday we showed you our upcoming M.O.R.E 5th Gen 4Runner Skid Plate System, a joint development with Mountain Off Road Enterprises and Battle Born Offroad.
This is sure to be one of the best skid plate kits on the market when it comes to protection, design and value. While we were up in Colorado developing the skid plates, we also worked on a few other Toyota 4Runner items we plan to release shortly! Check them out below and please let us know any feedback.
100% Bolt-In 10lb Power Tank Mount for 2010+ Toyota 4Runner
If you need portable, reliable, and fast air, look no further than Power Tank. The M.O.R.E. Power Tank mount for the 2010+ Toyota 4Runner is a 100% bolt in solution that works with or without rear window molle panels. Secure your 10lb air bottle safely while allowing easy, quick release access for filling up tires or running air tools.
ARB Dual Compressor & 1g Airtank Underhood Mount for 2010+ Toyota 4Runner
Battle Born Offroad & M.O.R.E. have developed a new ARB Dual Air Compressor + ARB 1 Gallon Tank underhood mount that tucks both items neatly away on the passenger side behind the airbox. This is a must have for anyone planning to install air lockers or a chuck for running air tools and filling up tires. Available as a bracket only or as a complete package, this is the best way to mount your ARB dual compressor.
These items are soon to be released and will be offered first to T4R members!
Battle Born Offroad Is The Only Source for M.O.R.E. Toyota Products
About M.O.R.E
M.O.R.E. began in Chris Overacker’s home garage in 1978. M.O.R.E. was the first to bring the Jeeping community the Shackle Reversal System for Jeep® CJ /YJ models. Mountain Off-Road Enterprises (M.O.R.E.) specializes in providing the highest quality products for offroad vehicles that we design and manufacture in-house using premium materials. We use our own personal vehicles for daily driving, exploring, rock-crawling, camping, fishing, hunting, gettin' stuck, and racing around with our buddies! Take a look at the extended selection of top-quality, wheeling hardware made right here in the U.S.A.!
Battle Born Offroad of Las Vegas, NV. We are your source for 4Runner offroad parts and accessories. Contact us for all your upgrade needs!
Will this work with the sliding rear cargo deck?? Seems like it will contact it.
EddieV4runnin
New member
Do you have a sliding rear cargo deck???
Mudhorn
New member
Does not work with the sliding deck. The other issue I did not like is that it makes it harder to open the jack compartment due to covering the panel latches.
To clarify the mount will fit, but a power tank will not. Could use the mount for something else.
It is a quality built product though and super easy to install, even with molle panels.
Last edited:
labrunner_t4r_
New member
No, mine didn't come with the sliding cargo deck. I never thought about that... I guess that woud make the mounting option a little harder.
EddieV4runnin
New member
Thank you, I really wanted to install this. I’m tired of using an air compressor that takes forever to air back up with.
Battle Born Offroad
New member
so to clarify, 100% will not work with sliding deck. in terms of the jack, you just need to unscrew the top nut (which has a handle) and pull back the mount to access the jack. we designed it that way to make it accessible.
Battle Born Offroad
New member
we have not confirmed fitment with 4th gens yet!
Battle Born Offroad
New member
Battle Born Offroad
New member
Thank you for sharing the link! We have updated our listings and add all of the new Toyota parts from MORE
Similar threads
