M11 Companion Flange Studs for Tcase - Available?

[bugman-74]

Hi Guys,
While un-bolting the driveshafts on my '99, I noticed that one of the pressed in studs on the transfer case output flange was missing, and replaced with a generic nut/bolt. It is the rear output companion flange with the larger M11 studs.

I have searched to no avail. Are these studs available anywhere, or must one purchase the entire companion flange?

 

[UnderFire]

Not available separately from the dealer, or aftermarket, found that out the hard way as well. Ended up having to settle for nuts and bolts off a 2nd gen 4Runner, at least their still the perfect size and grade.

 

[bugman-74]

Darnit.

Got the part numbers handy for the 2nd gen bits?

 

[UnderFire]

Darnit.

Got the part numbers handy for the 2nd gen bits?

Oops, it was actually an 05+ Tacoma that I sourced them from, 2nd gens were M10. I don't have a Toyota P/N but I have a couple links:

Drive Shaft Bolt, 11mm, 1.0x30mm (Tacoma 05+) - coreswest

Drive Shaft Nut, 11mm, 1.0x30mm (Tacoma 05+) - coreswest