gamefreakgc
Elite Member
Just throwing this out there, but does anyone with a non-boosted N/A 5VZ-FE have the ability to read or record their MAF voltage? The Torque App I don't think can do this but wondering if say a Scangauge or Ultra Gauge or other diagnostic reader can.
What I'm hoping to see is at full throttle, the MAF voltage from between 2500 to 5500 RPM. Doesn't have to be every single RPM recorded, could just be 2500, 3500, 4500, etc. and I can extrapolate the rest. Will be a 5 volt voltage reading, somewhere around 1.4 at idle and 4.ish at WOT I'm guessing. But I have no data to work with so hoping someone on here might.
What I'm hoping to see is at full throttle, the MAF voltage from between 2500 to 5500 RPM. Doesn't have to be every single RPM recorded, could just be 2500, 3500, 4500, etc. and I can extrapolate the rest. Will be a 5 volt voltage reading, somewhere around 1.4 at idle and 4.ish at WOT I'm guessing. But I have no data to work with so hoping someone on here might.
