PRBond
New member
So, I just replaced the upper radiator hose in my 3.4 V6. I went into my local AutoZone and bought one, came home to trim it a bit and install it. I didn't like the way it fit, and the bend put it right over the fan where I got maybe a half-inch of clearance.
Long story short, I checked it a couple days later and I could see where when filled with fluid, it would move and sure enough the fan was putting small nicks into it... I ended up going into Napa and bought one that fit worlds better and actually went out away from the fan before the bend.
Long story short I had to buy the part twice, but was much happier with the Napa hose than the one I got from AutoZone. Nothing against AutoZone, I still shop there quite a bit and they were cheaper, but in this case Napa had the better part.
Long story short, I checked it a couple days later and I could see where when filled with fluid, it would move and sure enough the fan was putting small nicks into it... I ended up going into Napa and bought one that fit worlds better and actually went out away from the fan before the bend.
Long story short I had to buy the part twice, but was much happier with the Napa hose than the one I got from AutoZone. Nothing against AutoZone, I still shop there quite a bit and they were cheaper, but in this case Napa had the better part.