New set of Tacoma 05-15' 5100 in my SR5?

[RattleAKAK]

Found a great deal on a brand new set of Bilstein 5100 adj. front shocks (F4-BE5-C477-T1) on my local CL site for the 05-15' Taco and want to make sure they will fit my 2011 SR5 4R. Intuitively I want to say that they will fit, but the valving of the shock may be different for a 4Runner as opposed to a Taco. These shocks are bare and I would be installing my factory springs. I searched and went through 10 pages. Please help

 

[BobsTrail]

I checked part numbers on Shockwarehouse and they are different. Our T4's use 24-196499

 

[RattleAKAK]

I checked part numbers on Shockwarehouse and they are different. Our T4's use 24-196499

Yeah, I referenced the part numbers as well. My question is if they will physically bolt up as I speculate the valving may be difference or the lower bushing etc. I did a ton of work on my 3rd gen 4R, and used Tundra adjustable coilovers from Bilstein (F4-BE5-6930-H5) and they bolted right up with a new upper mount.

 

[RattleAKAK]

From what I can tell, all that is needed is press out the bushing on the Tacoma 5100 and press in a 14mm. Throw my coils on it, adjust to .85' and go!!! Any other thoughts???