Nunyabiz
New member
I am glad to see that most people are not falling for this anti synthetic manure anymore.
True IF you have a car/truck where the seals have dried out "because" of running regular conventional oil for years and the crud that has built up has dried the seals out then it is possible that synthetic 'could" possibly cause a leak because it will clean the crud out and expose the leak caused by the petroleum oil.
BUT it is also possible that IF those seals are not too far gone that the synthetic will swell them back up after awhile and rejuvenate them as long as they are not too far gone, too dried out.
Of course you would never have had that problem if you ran synthetic from the get go.
You must have never had to deal with the Isuzu 3.5 engines. Any oil run in new from factory motor would leak/burn synthetic or not. There is an exception to every claim/rule.
If I'm using my 100K Runner for city driving, occasional roadtrips, and changing my dino oil every 5,000 (thats when the dealership sticker says to change it) does it even matter what kind of oil?
I have been using mobil1 full synthetic in the diffs and yesterday I noticed I could see what looked like rust in between the gear teeth when I looked through the drain hole of the front diff. Is it from not using 4wd regularly enough? Is regular oil a better protectant?
Talk about bringing a thread back from the dead! This thread, specifically the posts made my user Saved, had me laughing at my desk this morning. The use of the word "slipperier" was icing on the cake!!! I'll spare most of you the oil lecture, unless specifically requested, as most of you seem to have the ability to think for yourselves. I've spent my entire career working in the petrochemical industry in on form or another, and I sit on an API committee (and sit in on several others) and can tell you without a doubt that almost every word spewed forth by Saved is unfounded nonsense. The synthetic debate will continue until there is no longer dino oil to be found, and the choice is yours to run what you wish. I'd advise everyone, at least once every three oil changes, to send an oil sample to Blackstone Labs for analysis, as that information will tell you FAR more about the operational characteristics and parameters within your engine than anything on this forum ever will.