Idler pulleyOn startup I have a pulley or something related making a screeching sound I’ve not heard before.
Sent from my iPad using Tapatalk
Idler pulleyOn startup I have a pulley or something related making a screeching sound I’ve not heard before.
Sent from my iPad using Tapatalk
DAG GONE so close..I did hit it with a heat gun. The wrinkles smoothed out and I was pleased. Until...the wrinkels came back when it cooled.
DAG GONE so close..
If you are lucky the film may have an adhesive on the back. I'd try it again, and this time use a terrycloth towel and burnish it in a little as it cools to transfer some of the heat and stickyness(if any) to the main grille. Maybe try just a small spot first to see if it takes then work in one direction.
Then if the towel doesn't work, maybe something stiffer like a soft squeegee.
The stuff looks basically like monocote that they use on model airplanes, or is it a lot thicker?
The battery heater just sits under the battery, no need to apply any adhesive. Battery heater is a must in Alaska. The oil pan heater is applied using RTV silicone and it lasts for years. I've had one on my VW GTI since 2006 and it's still on there like I just installed it. A block heater usually replaces one of your freeze plugs and heats your antifreeze. On my VW the oil pan heater was enough to keep it from freezing and it was exposed to -65F.
Other option for me is to go color matched like a limited but I like the Sport package trim and will likely stay with the original-type grill.
I bought this 4runner with 59,000 miles and as far as I can tell this is the original OEM grill.
More heat gun on the grill last night. It shrunk again but the sticky back wouldn't hold, even when pressed on.
I was intrigued as well, sorry no new pics.
Looks like I have to decide to leave it or fix it. At this point I plan to get a new smoked chrome grill in the Spring. Other option for me is to go color matched like a limited but I like the Sport package trim and will likely stay with the original-type grill.
I bought this 4runner with 59,000 miles and as far as I can tell this is the original OEM grill.
Did anyone experience weird problems due to the cold weather this week? My steering was stiff. Today I noticed the cold ruined my smoked chrome grill.
Idler pulley
YotaMafia released this recently: 2006-2009 4th gen 4runner backlit grille – YotaMafia
Looks pretty good. I might be picking one up for my rig.
I’ve noticed a squeak immediately after ignition on mine too when it’s below 15 degrees or so. I guessing it’s the same thing. Is it a reason to be concerned? Do I need to replace it, or just be thankful that spring is around the corner?
yeah - itll shrivel up in -20 for sure.Same thing here, cracked/shriveled grille -20 temps.