ryrobertson
New member
Recently a mechanic did not re-install the 3 bolts which secures the power steering fluid reservoir. Any idea what size bolts go into it?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Power Steering Fluid Reservoir Bolts
- Thread starter ryrobertson
- Start date
Register to hide this ad
y=mx+b
New member
I haven't removed them, but I would say they look like m8x1.25. Thats a pretty common size that gets used around the 4runner. For length, just guestimate based on how deep the hole looks, maybe 15mm - 20mm would be be fine.
Last edited:
ryrobertson
New member
Cool, thanks. I’ll start with that.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I haven't removed them, but I would say they look like m8x1.25. Thats a pretty common size that gets used around the 4runner. For length, just guestimate based on how deep the hole looks, maybe 15mm - 20mm would be be fine.
I looked at mine today as well but also didn't pull them out. I concur with what you said.
y=mx+b
New member
This pic came from when I did my PS fluid, but I was actually out there today looking at headlight wiring for my switch to 06+ lights and took a look at them again. Seeing them in real life, I'm pretty confident they're m8x1.25. Should be good to go with that OP, just eyeball the length and grab some from ACE
ryrobertson
New member
Correct on the bolt size. Thanks!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
