Need some expertise ...2 years ago I had a really bad sway in the back end when going down the highway especially when I had slight weight in the back. when you would hit a shallow hole the vehicle will rock.....struts are good and coils were replaced. The culprit at the time I believe was the rear lower control arm ( looks like a dog bone). the one that bolts to the rear axle and body on both sides. I replaced it with a used set as they were to expensive at the dealer...well my sway is back the bushings are worn out..dealer says upper bushing is available but not the lower..some say you can use the same bushing at both ends...has anyone done this job before and can the bushings be replaced successfully at both ends.
Last edited:
