Replacing 1st Gen S/C with 2nd gen

[Nicholas47]

I ordered a 2nd gen s/c to replace my 1st gen. I’m under the impression that it should be a seamless swap. Anyone done this before. Will all the brackets/pulleys/belts be good to go?

 

[Devbot]

Wrong board friend, this is 3rd gen not 2nd gen

 

[Nicholas47]

Sorry for not being specific.

1999 4runner.

Has a TRD 1st Gen (gray) Supercharger.

Replacing with 2nd gen (black) S/c.

 

[HiLife]

Hes talking about: is it a straight swap going from the 3.4l gray 1st gen sc over to the 3.4l black TRD/Magnuson 2nd gen sc.

 

[mikeferg]

wont be a issue, as long as you have the proper 2nd gen pulley that goes to the s/c pulley, was it used or new? new will come with the kit

 

[Nicholas47]

wont be a issue, as long as you have the proper 2nd gen pulley that goes to the s/c pulley, was it used or new? new will come with the kit

It’s not coming with the kit. Only the blower itself.

 

[Nicholas47]

wont be a issue, as long as you have the proper 2nd gen pulley that goes to the s/c pulley, was it used or new? new will come with the kit

It’s not coming with the kit. Only the blower itself.

Is there a part I will need to order replace the gray s/c with the black s/c?

 

[Nicholas47]

It went right on. Only thing I think could have been an issue was the tensioner pulley it throttle cable bracket. Neither were, in my case.