Shrockworks bumper main hoop width

[HokieRunner]

My question: What is the inside width of the main hoop on a Shrockworks bumper?

After searching the forum both here and at 120 - I cannot find this info anywhere. I also have been talking with Mark @ Shrockworks who was very helpful and responsive but did not have a finished product in shop to help me with this question.

I'm planning my build and am trying to determine my light setup. I've heard you can fit a 30" light bar (which covers the solenoid hole) but just wondering what the actual hoop dimensions are. Any help is greatly appreciated!

 

[blk-4runner]

Don't think that your able to fit 30" LEDs bar, but I'm pretty it'll fit 20" LEDs bar, as that's the current setup I'm running.

 

[HokieRunner]

Don't think that your able to fit 30" LEDs bar, but I'm pretty it'll fit 20" LEDs bar, as that's the current setup I'm running.

Thanks! I appreciate it. I figured it would be pushing it/impossible to squeeze a bigger bar but had to ask.

If anyone can get a tape measure on their bumper hoop I'd appreciate it just for concrete numbers.

 

[CXS]

32" x 8" at the widest point, remember it tapers so at the top it's a bit smaller.

 

[needsmoresalt]

32" x 8" at the widest point, remember it tapers so at the top it's a bit smaller.

No way a 30" will fit, but two 20" do.

 

[jdkilroy]

You always have the option of specifying what you want for a hoop width but not sure that would allow you to stay in the GB. Those guys will build whatever you want.

 

[HokieRunner]

32" x 8" at the widest point, remember it tapers so at the top it's a bit smaller.

Thanks! Really appreciate it!

No way a 30" will fit, but two 20" do.

Holy smokes that's a lot of light. If I saw that at night I'd probably file a UFO sighting haha.

You always have the option of specifying what you want for a hoop width but not sure that would allow you to stay in the GB. Those guys will build whatever you want.

That's a good point but I'm sold on the standard hoop. Like how it follows the grill lines.

 

[mikey's2010SR5]

Wurton makes a 26" single row LED bar with 10 watt LEDs. I think I will eventually put once of these bad boys on my bumper but I might just do a 20" so I know I have access to the solenoid hole.

Wurton 26" LED bar