***Southern California Classifieds Thread***

265/70/17 BF Goodrich KM2s

I have a set of 265/70/17 KM2s with about 9/32 (~50%) of tread depth. One tread block has some damage. I purchased the vehicle used so I am unsure if it was done by the previous owner or myself. Tires were rotated every 5000 miles. I will also throw in the factory spare tire as well. Feel free to message me with any questions

Asking $300 o.b.o

Thanks!
 

Attachments

  • thumbnail_IMG_7022.jpg
    thumbnail_IMG_7022.jpg
    133 KB · Views: 735
  • thumbnail_IMG_7023.jpg
    thumbnail_IMG_7023.jpg
    137 KB · Views: 732
  • thumbnail_IMG_7025.jpg
    thumbnail_IMG_7025.jpg
    137.4 KB · Views: 738
  • thumbnail_IMG_7026.jpg
    thumbnail_IMG_7026.jpg
    135.9 KB · Views: 721
  • thumbnail_IMG_7027.jpg
    thumbnail_IMG_7027.jpg
    135.2 KB · Views: 724
  • thumbnail_IMG_7028.jpg
    thumbnail_IMG_7028.jpg
    131.4 KB · Views: 721
  • thumbnail_IMG_7024.jpg
    thumbnail_IMG_7024.jpg
    137.2 KB · Views: 722
Last edited:
4x4 locking hub conversion

4c0ec94a7fe93ed6312dd95678bded82.jpg


b70c99310e7c34f628f1a3c0421dbd87.jpg


Powder coated aisin hubs. Rebuild and resealed. Everything needed to do a conversion and all factory parts either new or rebuilt.
$700
$600 if you don’t want powder coated dials.

Many other parts available for 4x4 conversions. Plans changed when I found a 4x4 with e-locker

A-340f transmission with j shift t-case from a 2000 tacoma. $600obo

d7ee62b525900184cf0cc318d1ca13fe.jpg


Front 4.56 front non disconnect diff $250obo

be72911933d4066bdd7ed7314c0bfae8.jpg


Txt 310 467 eight 77 three

Email [email protected]

Located in San Pedro CA 90731






Sent from my iPhone using Tapatalk
 
Last edited:
Fs: Oem toyota 4runner off road 4pc pt208-89170-20

What: FS: OEM TOYOTA 4RUNNER OFF ROAD 4PC
PT208-89170-20

Generation: 5TH GEN

Where: LA, OC, Inland Empire, Joshua Tree, Big Bear


Price: $88

Will have photos up later today
 
Last edited:
I'm looking for a spare for my 4R. Looking to have it match my other 4 - 17" x 8.5" 6 lug. Does someone have a wheel they'd be willing to sell me?
 
I'm looking for a spare for my 4R. Looking to have it match my other 4 - 17" x 8.5" 6 lug. Does someone have a wheel they'd be willing to sell me?

I have a spare from my 5th Gen that has been sitting in my parents garage for about three years now. Not sure if it makes any difference but I have a 13 trail. If you want it ill sell it cheap. I'm in San Diego every weekend so we can meet up. I'll be heading down tomorrow morning so if you reply by then and want it I will bring it.
 
I have a spare from my 5th Gen that has been sitting in my parents garage for about three years now. Not sure if it makes any difference but I have a 13 trail. If you want it ill sell it cheap. I'm in San Diego every weekend so we can meet up. I'll be heading down tomorrow morning so if you reply by then and want it I will bring it.
I'm interested. Does it have a tire on it?

Sent from my SM-N950U using Tapatalk
 
Looking for me: a used 35x12.5.x17 tire just to slap on my spare, doesn't need to have much tread on it

Looking for a friend: aftermarket springs for a 4th gen 4Runner
 
Wanted: TRD off road Valance

Hey guys, I’m looking for the lower from valance for the Trail/TRD off road 5th gen. My stock one got ripped off at Cleghorn this morning. Thank you
 
Lower front Valance

Have some 5th gen front end parts if interested. Open to offers. Located in the Los Angeles area.

2014+ front bumper + upper grill + lower valance

2011 Trail Edition front end + head lights

Contact if interested.


Pmd about lower valance
 
FS: DFG Offroad Fridge Slide and Tilt for CFX 35/40

Hey guys & gals,

Up for sale is a brand new, never used, and never mounted DFG Offroad Fridge Slide & Tilt for a Dometic CFX 35/40. Long story short, I was suppose to have a drawer system built and have this mounted to it but that plan has changed...my loss your gain! Comes with all mounting hardware and straps. Does NOT come with fridge LOL

Asking $300 picked up in LA/OC area
Willing to ship at buyers expense

Please feel free to contact me with any questions

Thanks!
-Artie
 

Attachments

  • thumbnail_IMG_7075.jpg
    thumbnail_IMG_7075.jpg
    137 KB · Views: 823
  • thumbnail_IMG_7074.jpg
    thumbnail_IMG_7074.jpg
    132.1 KB · Views: 822
  • thumbnail_IMG_7076.jpg
    thumbnail_IMG_7076.jpg
    114.4 KB · Views: 836
Just call the Truck Shop in Mira mesa. They will weld you whatever you want. Just had them do mine.

What did you go with and what was the price point if you don't mind me asking? I've gotten quite a bit of work done there and know that they fab some products but never heard about them doing sliders. But I guess sometimes you won't know unless you ask!
 

Members online

Forum statistics

Threads
278,316
Messages
3,554,113
Members
248,016
Latest member
Advally Service

Trending content

Back
Top