Trim packers for rear springs

[momo.75]

I was curious if any of you have used OME trim packers on the rear springs of your 4th gen? I have just a slight saggy butt so I was curious if you were pleased with them?

 

[J.A.]

I was curious if any of you have used OME trim packers on the rear springs of your 4th gen? I have just a slight saggy butt so I was curious if you were pleased with them?

I have one OME 150PR10R on the driver side to try to get rid of side to side variance and really couldn't see a noticeable difference at all.

 

[momo.75]

i put the tape to it today for some measurements. It wasn't as bad as I thought but still would like to adjust it a little. On completely flat surfaces it sometimes looks like it is sagging just a little.

FR - 38 7/8"
FL - 38 3/4"

RR - 39"
LR - 38 3/4"

 

[Brian3676]

I have one on the drivers side. Helps a little, but needs to be more like 1/2" thick to make it closer to level.

I just ordered some custom spacers from [MENTION=9]Jason B[/MENTION] . I went with 1" for driver side and 1/2" for passanger.

 

[S p a r k y]

I just ordered one and a bunch of other stuff, can let ya know next weekend!

 

[having fun]

When I was on a 2.5 spacer lift in the rear, I was able to stack 2 of them 150s above the spacer, and still had the bump stopper installed with them also.