Member
|
|
Join Date: Apr 2014
Location: Poland, Lodz
Age: 42
Posts: 56
Real Name: Lucas
|
|
Member
Join Date: Apr 2014
Location: Poland, Lodz
Age: 42
Posts: 56
Real Name: Lucas
|
Replacing brake fluid proper way
Hi,
I am going to just replace the brake fluid in the system.
Is the procedure from the Haynes manual for bleeding brake system the right way to do it?
I.e:
- (Front), ignition ON, wait for the pump motor to stop, pump pedal several times, depress pedal, bleed
- (Rear), ignition ON, depress pedal, bleed
- engine OFF, pump pedal 40 times to remove boost pressure
- done
I did it a few years ago when servicing calipers. Now I just want to replace the fluid. No air was entered in the system.
How much DOT3 will be sufficient?
__________________
2007 SR5 4x4 V6. Bilsteins 5100 all around. Front set to 1.75. Daystar spacers 1.5 in the rear. Stock springs. Cooper Discoverers A/T3 265/75R16.
|