Prev
Fit the switch into the blank. It won't be there perminently BUT if you attach your wires, you can find out how much slack you can cut from the wires.
Next
Prev
The connector should fit onto the spayed connectors that you put in. One thing to keep in mind. The top of the two poles is the ground (white wire). T
Solder the ends of the wires to the connectors. Then to avoid shorting the wires, put shink tubing over the wire and most of the connector.
Zip tie the wires to the harness to keep them tidy and in one place
Fit the switch into the blank. It won't be there perminently BUT if you attach your wires, you can find out how much slack you can cut from the wires.
Pop out one of the blanks and fish the other end of your wires through. Just leave them hanging through the dash for now.
I used a coat hanger to GENTLY fish the wires through the gromet.
Run two 8 feet lengths of wire through the gromet in the firewall. The actual distance from the switch to the connector is about 4 feet, but it makes
Next
emelianenkov

Fit the switch into the blank. It won't be there perminently BUT if you attach your wires, you can find out how much slack you can cut from the wires.

There are no comments to display.

Media information

Album
VSC modification
Added by
emelianenkov
Date added
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Share this media

Members online

No members online now.
Total: 3,400 (members: 2, guests: 3,398)

Forum statistics

Threads
278,315
Messages
3,554,130
Members
248,016
Latest member
Advally Service

Share this page

Back
Top