Media added by emelianenkov

Run two 8 feet lengths of wire through the gromet in the firewall. The actual distance from the switch to the connector is about 4 feet, but it makes

Run two 8 feet lengths of wire through the gromet in the firewall. The actual distance from the switch to the connector is about 4 feet, but it makes

  • Reaction score 0
  • Comments 0
IMG00064 20101229 2046

IMG00064 20101229 2046

  • Reaction score 0
  • Comments 0
IMG00063 20101229 2043

IMG00063 20101229 2043

  • Reaction score 0
  • Comments 0
IMG00062 20101229 2043

IMG00062 20101229 2043

  • Reaction score 0
  • Comments 0
Both connectors on both posts

Both connectors on both posts

  • Reaction score 0
  • Comments 0
Connector fit onto the post

Connector fit onto the post

  • Reaction score 0
  • Comments 0
Crimped spayed connector to fit on the post. Work in increments, making sure the connector is TIGHT on the post

Crimped spayed connector to fit on the post. Work in increments, making sure the connector is TIGHT on the post

  • Reaction score 0
  • Comments 0
The trimmed connector will be crimped to fit very tightly onto one of the two posts in this connector *USE BOTH HERE AS WELL*

The trimmed connector will be crimped to fit very tightly onto one of the two posts in this connector *USE BOTH HERE AS WELL*

  • Reaction score 0
  • Comments 0
Take another trimmed spayed connector and remove the plastic. We will be crimping the round part to fit on the posts inside the connector. *MAKE TWO O

Take another trimmed spayed connector and remove the plastic. We will be crimping the round part to fit on the posts inside the connector. *MAKE TWO O

  • Reaction score 0
  • Comments 0
Fit both of the trimmed connectors into the contact points in the adaptor

Fit both of the trimmed connectors into the contact points in the adaptor

  • Reaction score 0
  • Comments 0
The trimmed connector fits into the adaptor

The trimmed connector fits into the adaptor

  • Reaction score 0
  • Comments 0
Take 2 spayed connectors and trim one side off. These will be used to make a gap

Take 2 spayed connectors and trim one side off. These will be used to make a gap

  • Reaction score 0
  • Comments 0
The connector that is just above the knuckle (with the 2, green and white wires). Not the connector directly below the reservoir, but the one below TH

The connector that is just above the knuckle (with the 2, green and white wires). Not the connector directly below the reservoir, but the one below TH

  • Reaction score 0
  • Comments 0

Members online

Total: 582 (members: 2, guests: 580)

Forum statistics

Threads
278,315
Messages
3,554,104
Members
248,016
Latest member
Advally Service

Share this page

Back
Top