Media added by emelianenkov

Navigation

Browse albums

Trending media

[No title]

[No title]

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
White needles!

White needles!

  • Reaction score 0
  • Comments 0
Top needle is with orange paint scraped off Bottom needle is the stock orange needle

Top needle is with orange paint scraped off Bottom needle is the stock orange needle

  • Reaction score 0
  • Comments 2
Looks legit, right?

Looks legit, right?

  • Reaction score 0
  • Comments 0
Andover 20111230 00026

Andover 20111230 00026

  • Reaction score 0
  • Comments 0
[No title]

[No title]

  • Reaction score 0
  • Comments 0
Put in blue LEDs for the shifter and the cup holders. Hard to see in the picture, but the blue gives a nice ambient glow inside the gated shiter regio

Put in blue LEDs for the shifter and the cup holders. Hard to see in the picture, but the blue gives a nice ambient glow inside the gated shiter regio

  • Reaction score 0
  • Comments 2
user63211 pic7383 1320684358

user63211 pic7383 1320684358

  • Reaction score 0
  • Comments 0
user63211 pic7384 1320684358

user63211 pic7384 1320684358

  • Reaction score 0
  • Comments 1
Andover 20111106 00027

Andover 20111106 00027

  • Reaction score 0
  • Comments 1
Some of the LEDs look kinda white, but they're blue.

Some of the LEDs look kinda white, but they're blue.

  • Reaction score 0
  • Comments 2
Wire the switch... pretty easy. Use shrink tube to prevent shorting.

Wire the switch... pretty easy. Use shrink tube to prevent shorting.

  • Reaction score 0
  • Comments 0
The connector should fit onto the spayed connectors that you put in. One thing to keep in mind. The top of the two poles is the ground (white wire). T

The connector should fit onto the spayed connectors that you put in. One thing to keep in mind. The top of the two poles is the ground (white wire). T

  • Reaction score 0
  • Comments 0
Solder the ends of the wires to the connectors. Then to avoid shorting the wires, put shink tubing over the wire and most of the connector.

Solder the ends of the wires to the connectors. Then to avoid shorting the wires, put shink tubing over the wire and most of the connector.

  • Reaction score 0
  • Comments 1
Zip tie the wires to the harness to keep them tidy and in one place

Zip tie the wires to the harness to keep them tidy and in one place

  • Reaction score 0
  • Comments 0
Fit the switch into the blank. It won't be there perminently BUT if you attach your wires, you can find out how much slack you can cut from the wires.

Fit the switch into the blank. It won't be there perminently BUT if you attach your wires, you can find out how much slack you can cut from the wires.

  • Reaction score 0
  • Comments 0
Pop out one of the blanks and fish the other end of your wires through. Just leave them hanging through the dash for now.

Pop out one of the blanks and fish the other end of your wires through. Just leave them hanging through the dash for now.

  • Reaction score 0
  • Comments 0
I used a coat hanger to GENTLY fish the wires through the gromet.

I used a coat hanger to GENTLY fish the wires through the gromet.

  • Reaction score 0
  • Comments 0

Members online

No members online now.
Total: 260 (members: 0, guests: 260)

Forum statistics

Threads
278,312
Messages
3,554,083
Members
248,016
Latest member
Advally Service

Share this page

Back
Top